Common failures and solutions of impact crushers

The impact Stone Quarrying Process Line is widely used. If you can understand some common faults and solutions of the impact crusher, it will inevitably improve production efficiency and bring benefits to the enterprise itself. we are here to explain to you one by one:

1. The bearing of impact Maintenance Of Blade Of Vertical Mill is easy to generate heat. Bearing heat indicates lack of oil. At this time, it is necessary to refuel in time. Of course, too much will also cause bearing heat. Therefore, when refueling, be sure to check the oil level, bearing damage should be replaced in time. 2. Abnormal vibration of impact crusher. Abnormal vibration indicates that the material is too large and unevenly worn. At this time, check the feed size, replace the hammer head in time, adjust the rotor, and reinforce the bolts. 3. The belt of the impact crusher is easy to turn over. Turning the belt over indicates that the belt is badly worn and the triangle belt needs to be replaced.

4. The output granularity of the impact crusher is too large. The factors affecting the output particle size are generally: the hammer head is seriously worn, the gap between the hammer head and the impact plate is too large, or the feed particle size is too large, etc., which requires specific measures according to the specific situation.

Views: 1

Comment

You need to be a member of On Feet Nation to add comments!

Join On Feet Nation

© 2024   Created by PH the vintage.   Powered by

Badges  |  Report an Issue  |  Terms of Service