hardcore speedcore download full label

Name: hardcore speedcore download full label
Category: Downloads
Published: tiolacklerea1981
Language: English

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Script that start the PPPoE server with NAT option Create a script pppoe-up and chmod to 755. root@pppoe:/etc/ppp# nano pppoe-up root@pppoe:/etc/ppp# chmod 755 pppoe-up.
Networks and System Administration related stuff. Linux and Windows servers administration material and tutorials.
Networking and System Administration.
2) Configuration Server side : Go the to /etc/ppp, Many files, but interested are , pppoe-server-options, pppoe.conf, options,pap-secrets,chap-secrets PAP is default authentication method, I let it. root@pppoe:/etc/ppp# nano pap-secrets You can change the authenticaion method from follwing file root@pppoe:/etc/ppp# nano pppoe-server-options.
PPPoE Server Setup: Operating System: Ubuntu Desktop(8.04)
a) Change following in /etc/ppp/options file, some to them already uncommented. In case of chap as authentication, the file looks like root@pppoe:/etc/ppp# nano chap-secrets.
PPPoE Server Under Ubuntu/Debian.
Final testing , Both client and server will get the ip and they are able to ping each other.
QUICKSTART Method : "If you're lucky, the "quickstart" method will work. After unpackingthe archive, become root and type" root@pppoe:/var/tmp# cd rp-pppoe-3.10/ root@pppoe:/var/tmp/rp-pppoe-3.10# ./go.
I got some gcc error, fixed it by installing "build-essential", This will install gcc and a some other files that need to build something from source.root@pppoe:/var/tmp/rp-pppoe-3.10# ./go.
It setted up ultimatley, I spent some time, checking the script carefully, running and testing several times before it was fixed.
This will use to connect the pppoe server.
Wednesday, May 13, 2009.
It will search for pppoe server on ethernet server. Once it found on, in this case in eth0 it will prompt for user name: test and passwd: test.
Execute the pppoe-up script in server. root@pppoe:/etc/ppp# ./pppoe-up.
Connection of client Run pppoeconf in client's console, client# pppoeconf.
You will get messeg, "Congratulations, it should be all set up!" Type 'pppoe-start' to bring up your PPPoE link and 'pppoe-stop' to bring it down. Type 'pppoe-status' to see the link status.
Client side Install pppoeconf, which may be already installed. apt-get install pppoeconf.
Open README file and go through it.There are 3 methods I shall go for first one, QuickStart method.

Testing and Troubleshooting Open the /var/log/syslog in server and monitor, There are some problems which need to fix After fixing the issue, reconnect the client and monitor the log on server. client# pppoeconf.
Client Side : # apt-get install pppoeconf.
1) Installation of Softwares: Server Side a) ppp apt-get install ppp b) pppoe apt-get install pppoe c) rp-pppoe (I used rp-pppoe-3.10.tar.gz) RP PPPoE; can be obtained from, http://www.roaringpenguin.com/products/pppoe After download Move it to some place e.g /var/tmp, unpack and change permission.
https://caribbeanfever.com/photo/photo/listForContributor?screenNam...