Purchased a new HP printer and looking out for the simplest steps for its unboxing, driver downloading and installation? You are at the right place. Here, in this blog, we are going to explain step-by-step processes for the same. Check them out:

Unboxing HP printer
Unpacking HP printer requires a great deal of attention because any single damage can lead to the malfunctioning of your 123 HP printer. Now, go through these steps and do exactly the same as mentioned:
1. Take away the packing material and remove the tape
2. Now, bring out printers and provided accessories cautiously
3. Remove all the packing material from the cartridge as well as the input tray
4. Check the instruction manuals or www.123.hp.com/setup to know the power supply your specific HP printer model needs
5. Connect it to the external power supply plug accordingly.
a. Make sure the other end of the cable is connected to the printer
6. Switch on the printer
7. Explore the Control Panel settings and set date, time, and language of your HP printer
After settling the printer down, it’s time to connect it to the computer system or laptop by downloading and installing its drivers from 123.hp.com/setup.
Downloading and installing HP printer drivers from www.123.hp.com/setup
Drivers build a bridge between the computer system and the printer. Therefore, downloading and installing the HP printer’s driver from 123.hp.com is mandatory. This entire task needs to be executed carefully. Follow these instructions for the same:
1. Visit the official website of HP: 123.hp.com
2. Provide your HP ENVY, OfficeJet, or DeskJet model number
a. The model number is mentioned on the front of your printer
3. Click Search
4. Now, click Download
5. This will initiate downloading of your particular HP printer’s drivers
a. The downloading time solely depends on the speed of your internet connection. However, if the network speed is good, then it will not take more than five minutes to get the file downloaded.
6. Once 123 HP setup downloads in the footer of your computer screen, click Run
a. If you cannot see any setup file there, then either check the downloads history or open the downloads folder in your system drive)
7. You will be prompted by an installation wizard
8. Follow the onscreen instructions to proceed
9. You will also see a license terms and conditions page
10. Go through those conditions and click I agree to continue
11. Now, do as instructed on the screen to finish the installation process
Printing a self-test page
Even if everything settles down according to the standard guidelines, it is recommended to give a test print. For this, load the right paper to the paper tray and make sure all the papers are moisture-free. Moreover, do check that the printer is in ready state or not. Now, follow these steps:
1. Open any document on your computer system (Make sure it has some text written in it)
2. Press Ctrl+P or choose any other option (depending upon the software) to give the print command
3. The printer will start printing the document
4. If the print is perfect, then proceed to print other documents without a second thought
However, if it doesn’t, then check the cartridge for ink or read the error code displayed on the control panel or the computer screen. You are good to go!
(Please note that the aforementioned steps apply to almost all LaserJet and DeskJet printers range from Hewlett Packard. However, if you find a glitch while performing the same to any specific HP printer, then it is recommended to seek assistance from an HP printer tech support executive. You will be provided with an assured solution in no time.)
Hope the information was useful!
Also Check: Lexmark support number
Source: https://www.wattpad.com/676507008-how-to-set-up-an-hp-printer-via-1...