indesign cs2 power shortcuts download rapidshare

Name: indesign cs2 power shortcuts download rapidshare
Category: Downloads
Published: unikcipfudd1970
Language: English

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PE 1C Program Equalizer.
The PE 1C is a passive, all-tube EQ, based on the classic PULTEC EQP 1A design and featuring a passive EQ section and a high quality op amp. With the original Pultec out of production for decades and used examples demanding sky-high prices, the PE 1C is by far the easiest way to achieve this unique and coveted sound.
The PE 1C low end section combines two separate passive EQ filters with slightly different cut/boost frequencies. When the two sections are combined, this results in truly unique EQ curves, often named the “Low End Trick” and very useful for cleaning up low/mid frequencies.
The high frequency and midrange bands really stand out in terms of transparency and clarity, and the PE 1C is broadly regarded as one of the world’s finest passive tube based equalizers.
History and Details.
“The Tube-Tech program EQ PE1A is exactly the same as Pultec program EQ!”
This was our message when promoting the very first Tube-Tech equalizer back in 1985. The Tube-Tech PE1A program equalizer was originally made as a European exact equivalent of the US Pultec program eq EQP1A, that became very popular in the US during the eighties in recording studios in New York and LA. The smooth sound of the Pultecs made these eq”s very different and attractive.
The challenge of this illusive sound motivated Tube Tech founder and designer John Petersen to design and manufacture something that sounded just excately the same, featuring equal specs for all components .
The magic test was mixing with Pultec EQ1PA on the left channel and Tube Tech PE1A on the right channel and check the stereo image: It had to remain perfect on all settings!
The PE1A was the first product carrying the TUBE-TECH name 28 years ago.
Features and Technical Specifications.
The TUBE-TECH PE1C is a passive tube based program equalizer based on the design of the old PULTEC EQP1A, featuring an all passive eq section and a high quality op amp. All components used are of the highest standard.
The TUBE-TECH PE 1C Program Equalizer contains a low frequency boost and attenuation section (shelving), and a high frequency boost section (peaking). The high frequency section has variable bandwidth as well as attenuation (shelving). The filter section is of the passive type followed by a tube based push-pull amplifier to restore the gain.
Input and output are transformer balanced as well as fully floating. Input and output transformers come with a static screen between the primary and secondary wirings.
Tube based push-pull amplifier Freq. resp. @ -3 dB: 5 Hz – 40 kHz Low noise: 60 dB @ 10 kHz All-tube passive EQ 4 LF frequencies: 20, 30, 60 and 100 Hz (Boost: 0 to +14 dB, attenuation: 0 to -18 dB) 10 HF boosts with variable bandwidth: 1, 1.5, 2, 3, 4, 5, 8, 10, 12 and 16 kHz (0 to +18 dB w/ sharp Q, 0 to 10 dB w/ broad Q) 3 HF attenuations: 5, 10 and 20 kHz (0 to -18 dB) Input impedance: 600Ω No insertion loss Clickless In/Out switch Conductive plastic potentiometers In- and output are transformer balanced and fully floating.
Sound Examples.
The sound samples on this player also covers the sound of the modular PE1C: EM1A, since the circuits and sound in the two units are exactly the the same.

http://sigebage1979.eklablog.com/a-ha-best-mp3-download-usb-a179614840