java 5 download

Name: java 5 download
Category: Soft
Published: ucelalra1981
Language: English



























Prosafe vpn client professional software download.
Vulnerability fix: Possibility of a man-in-the-m ) BugFix: IKEv2 : No traffic to remote network.VirtualItf error 1 - 209 - 5010 BugFix: IKEv2 : Exporting a Single tunnel exports all Child SA BugFix: IKEv1: Tunnel is not deleted when XAuth fails during a Phase 1 renegotiation BugFix: Cannot open tunnel with a token inserted after the VPN Client starts BugFix: IKEv2 child SA is not removed when tunnel is closed for DPD timeout reason BugFix: IKEv2: no traffic when NATT port is changed for one tunnel, and UDP Encap enabled BugFix: IKEv2: IPV4 DNS not set properly when Gateway sends an IPV6 address BugFix: IKEv1 Traffic verification: 1st timer is not properly initialized.
Release 6.4.
Release 6.45 build 002 (Feb. 2018)
Bugfix: IkeV2: Fragmentation IkeV2 and DH algo set to auto => fragmentation is not selected. Bugfix: InjectP12 command: new cert not update when closing the session. Bugfix: IkeV2 Fragmentation issue: some fragment sizes lead to Auth Fail or Syntax Error. Bugfix: IkeV2: Sometimes tunnel doesn't open, IKE Init fails (error with "0") Bugfix: IkeV1 Fragmentation: Cisco Vendor . Feature: Support of Microsoft Signing for W10 drivers. Feature: IkeV2: Support of multiple networks in the same remote TS, in CP mode. Improvement: SSL VPN: Reception Socket buffer sizes are increased to accept traffic peaks. Improvement: Improvement of the automatic software activation when the subscription is going to expire. Improvement: Improvement of the software activation mechanism if activation errors occure. Bugfix: Remote ID mismatch on "DER ASN1 DN" with the same ASCII string. Bugfix: IKEv2: DPD handling: Tunnel was closing when one DPD message is lost. Bugfix: IKEv2 child SA is not removed when tunnel is closed for DPD timeout reason. Bugfix: Could not open tunnel with mixed SujectAltName containing an IP address. Bugfix: IKEv1: Traffic verification with pings doesn't work properly. Bugfix: No traffic when virtual IP address ends with .255. Bugfix: SSL VPN: When using TCP mode the tunnel may close unexpectedly. Bugfix: Silent install is not silent on Windows Seven. Bugfix: IKE SA renegotiation failed with a Fortigate gateway. Bugfix: IKE SA renegotiation failed in a CHILD SA. Bugfix: Error message "driver not signed" when installing VPN Client on Windows 10 with UEFI BIOS option Secure Boot Enabled. Bugfix: IKEV2 EAP MultAuth tunnel closed after key renewal. Bugfix: IKEV2 Multiple Auth: When changing an option in IKE SA Tab, certificate vanishes.
Release 6.41 build 003 (Jan. 2017)
Feature: A notification let users know GINA mode will not work for tunnels defined on an USB key (USB mode). Feature: When mounting several tunnels at the same time, PIN code is asked several times. Improvement: Polish translation of the VPN Client completed. Improvement: Various GUI improvement for OEM version (strings, product or trade name, etc.). Improvement: Connection panel: truncations when the specified font doesn't exist. Improvement: The PIN code is asked only once when several tunnels from a same phase1 are opened successively. Improvement: All PKI options are now configurable in vpnsetup.ini (setup initialization) file and via the setup command line options. See the VPN Client Deployment Guide (VPN Premium only). Improvement: TLS tunnel: TlsAuth option worked only with SHA1 Authentication algorithm. TlsAuth is now possible with all authentication algorithms (SHA256, SHA 512, etc.). Improvement: TLS tunnel: TlsAuth option is also operational with key direction set to client or server. Improvement: All opened tunnels are properly closed when Windows shutdowns quickly. Bugfix: PIN code is asked everytime during Phase1 renewal. Bugfix: Wrong PIN code error occurs during Phase1 renewal in some case. Bugfix: Socket bind fails when executed too quickly after interface is up. Bugfix: Bad xauth password leads to a VpnConf Crash. Bugfix: Import of tunnels with DPD parameters may lead to tunnel instability. Bugfix: Win10: TgbikeNg is not stopped on Shutdown. Bugfix: Windows 10: When the user session is locked, the VPN GINA is not displayed. Bugfix: Configuration with Virtual IP set to "::" doesn't work. Bugfix: No virtual interface when virtual IP is not specified and remote network is a range of address Bugfix: The Gateway Certificate CRL was checked despite this checking is disabled. Bugfix: Crash Ike on specific UNITY_DEF_DOMAIN values sent by the gateway (Mode config / Mode CP).
Release 6.40 build 004 (Aug. 2016)
Release 6.3.
Release 6.30 build 002 (Oct. 2015)
Feature: Ability to hide the activation window which normally appears at the end of a subscription period Improvement: DPD mechanism improvement Improvement: Ercom smartcard management improved with SSL Improvement: Improvement of the .ovpn files conversion (OpenVPN configuration) Improvement: Security of the tunnel opening is improved : when the gateway CA is unknown, the tunnel doesn't open. Bug fixing: SSL error "TLS handshake failure: No CA" fixed by improving the management of CA check. Bug fixing: IKEv1 erratic freeze fixed Bug fixing: Systray popup message for SSL tunnel fixed Known issues for release 6.3. Within VPN Configuration with two VPN Tunnels with the same virtual IP address, only the DNS/WINS server address of the first VPN tunnel is used. Workaround: use 2 different virtual IP addresses if DNS/WINS server addresses must be different for each VPN tunnel. The traffic indicator in the Connection Panel doesn't work properly with IKEv2 VPN tunnels. Traffic detection is not working properly with Config Payload mode enabled (i.e. equivalent to Config Mode in IKEv1). Configuration error when having several IkeV2 or SSL tunnels using a Gemalto Smartcard in PKCS11 Mode Virtual interface errors are not detected for IkeV2 and SSL tunnels.
Release 6.30 build 001 (Oct. 2015)
Feature: Windows 10 full compatibility Feature: New Token interoperability with Feitian epass2003 and gemalto/axalto .net Feature: Compatibility with Fortinet Fortigate IKEv2. TheGreenBow VPN Client is the only VPN Client which can be used to open an IKEv2 tunnel with a Fortigate gateway. Feature: New Ercom CryptoSmart Micro SD support for IKEv1, IKEv2 and SSL Feature: New Xiring Pinpad support for IKEv2 and SSL. Feature: After a 1st installation, a tip is displayed over the taskbar icon in order to show the user how to use the VPN Client. Feature: Logs can now be enabled from the Console. Improvement: IKEv1 - DPD mechanism improvement: tunnel correctly closes on DPD failure and gateway renegotiation, DPD keeps on on network disconnection, DPD timers management is tuned. Improvement: When a VPN Configuration is created with the Wizard, the default parameters are: DH Group = Auto and Aggressive Mode = TRUE (set) Improvement: smartcard management improvement Improvement: Debug/Trace mode can be activated from any window/panel of the VPN Client (Configuration panel, connection panel or Console). Bug fixing: Compatibility with 3rd party software such as firewall, anti-malware or antivirus Bug fixing: BSOD/Conflict with 3rd party software Bug fixing: log files names are correctly updated on date changing. Improvement: tunnel opening or closing process is stopped on IKE reset Bug fixing: Launched in silent mode, the setup ended with a crash if a password greater than 15 characters was set in the command line. This bug is fixed. Bug fixing: For a 2-DNS tunnel, the management of the second DNS is fixed. Improvement: Compatibility between tunnel configured with VPN 5.5 and tunnel configured with VPN 6.2 Improvement: Integration of security update for OpenSSL (CVE-2015-0204, FREAK vulnerability fix) Improvement: Windows IKEEXT cohabitation is correctly managed on Windows 8 / Windows 6.1 upgrade.
Release 6.2.
Release 6.21 build 001 (Jui. 2015)
Improvement: IKE tunnel closes more quickly on network disconnection. Improvement: During a software update, the software activation can be processed within a VPN tunnel. Improvement: Possibility to create a VPN configuration with multiple auth + EAP + certificate. Improvement: (IKEv1) Phase1 closes (and can be re-open) as soon as the tunnel is closed by the gateway. Improvement: VPN Client can open tunnels even if the Internet connection appears after it starts. Improvement: (IKEv2) Local and Remote ID now display explicit "E-mail" instead "ID_RFC822_ADDRESS". Bug fixing: (IKEv1) "Initial contact" is not sent anymore upon tunnel renegociation. Bug fixing: Correct management of certificates containing an OID in the subject. Bug fixing: Tunnel opening on traffic detection might not work after a restart of the VPN Client software. Bug fixing: Cannot open an IKEv1 tunnel when switching from a network to another while VPN Client is running (on a workstation with two NICs) Known issues for release 6.2. Within VPN Configuration with two VPN Tunnels with the same virtual IP address, only the DNS/WINS server address of the first VPN tunnel is used. Workaround: use 2 different virtual IP addresses if DNS/WINS server addresses must be different for each VPN tunnel. The traffic indicator in the Connection Panel doesn't work properly with IKEv2 VPN tunnels. Traffic detection is not working properly with Config Payload mode enabled (i.e. equivalent to Config Mode in IKEv1).
Release 6.20 build 005 (Mar. 2015)
Improvement: Better certificate's management. Feature: Support of nested tunnels between different protocols Feature: New Configuration Wizards for IKEv2 and SSL tunnels Feature: Support of the Ingenico "Leo" Pinpad Feature: Possibility of certificate injection via a command line option (online certificate injection) Feature: Support of Freebox compatibility Feature: Automatic importation and translation mechanism for OpenVPN (.ovpn) and Cisco (.pcf) files Improvement: Dynamic display of Config Payload informations for IKEV2/IPV6. Improvement: [IKEv2] Support of several Child SA per Initial SA. Improvement: Improvement of token access speed. Improvement: [IKEv1] When the PIN code entry is canceled, the tunnel opening process is aborted. Bug fixing: DPD still working when "split tunneling" is enabled. Bug fixing: [IKEv1] "Automatic" mode works for Phase1 encryption when gateway reports AES. Bug fixing: Modification of IKE port and NAT port (IKEv1 parameters) is fixed. Bug fixing: Improvement of Token removal detection.
Release 6.20 build 001 (Feb. 2015)
Improvement: Allow to use a self-signed Root Certificate from Windows Certificate Store. Improvement: USB Mode Confirmation popup only appears when required. Feature: Smartcard roaming support for IKEv2. Feature: Handle IKEV2 multi-proposals in order to simplify tunnel setup. Feature: [SSL] Support of TCP mode for the transport. Feature: [IKEv2] Automatic switch to PKCS#11 when m >
Release 6.1.
Release 6.12 build 001 (Jan. 2015)
Feature: Prevent broadcast transfers to remote network. Improvement: Support of TLS connection without user certificate. Bug fixing: Import or export VPN Configuration to or from a mapped drive fails. Bug fixing: Packets with a payload smaller than 24 bytes are dropped in IPv6 VPN tunnel, causing issues for FTP. Bug fixing: Incoming packets ending with .255 on port 4500 are not handled properly. Bug fixing: 'TSocket message data type 0 could not be sent' error message preventing an IKEv1 VPN tunnel to open using an IPv6 IP address. Bug fixing: VPN tunnel fails to open due to unknown OID from the Certificate (i.e. Object Identifier). Need to add 'GN' label for OID (i.e. Given Name).
Release 6.11 build 003 (Dec. 2014)
Improvement: Support of all 3 addressing modes i.e. host, subnet and IP address range with IKEv2 VPN tunnels. Improvement: Certificate Authority (CA) might or might not be specified when importing a P12 certificate within an IKEv2 VPN tunnel configuration. Improvement: IKEv2 VPN tunnel supports an empty Remote ID and it is considered as 'Accept any ID from remote' as it does in IKEv1 VPN tunnels. Bug fixing: Pre Shared Key can be saved with shortcut 'Crtl+S' without checking against the 'Confirm' field.
Release 6.10 build 014 (Oct. 2014)
Improvement: Various text strings and user interface improvements. Bug fixing: Error "disagreement on PFS" when configured with 'Auto' for PFS in IKEv1 Phase2 (gateway specific). Improvement: VPN tunnel opens faster when using a certificate on a PKCS#11 Smartcard or Token. Improvement: All settings in the 'Security' tab are set to 'Auto' mode when creating a new SSL VPN tunnel. Feature: IP address can change during renegotiation with VPN tunnel using IKEv2. Improvement: VPN tunnel IKEv2 and IPV6, replace mask with prefix length in the Child SA. Improvement: New menu strings to create a Phase1 and Phase2 consistent between IKEv1 and IKEv2 now called 'New VPN Gateway' and 'New VPN Connection' accordingly.
Release 6.10 build 006 (Jun. 2014)
Feature: TheGreenBow IPsec VPN Client becomes TheGreenBow VPN Client as it supports IPsec and SSL. Feature: Support of IPv4 and IPv6 simultaneously o Ability to handle heterogeneous IPv4 and IPv6 networks on the LAN and WAN sides, either on corporate or user home networks. The feature 'Auto' (for IPv4/IPv6) enables to support those complex environments with IPsec (IKEv1/v2) or SSL VPN tunnels. o Ability to detect IPv4 or IPv6 network automatically for both IPsec and SSL VPN tunnels. o Ability to send IPv4 and IPv6 within the same tunnel. Feature: Support of IPsec and SSL simultaneously.

Views: 1

Comments are closed for this blog post

© 2020   Created by PH the vintage.   Powered by

Badges  |  Report an Issue  |  Terms of Service