Just what cuplock scaffold work Method?


Cuplok is a versatile system scaffold. It was designed by means of SGB - Scaffold The uk.

The name comes about due to cup shape of the fittings within the standards (ie vertical customers.

The system is made to allow angles other than 90 degrees that they are achieved.

As shown within the following photo, the components are held into position by rotating the upper component to the cup with the hammer.

Other types with system scaffold include kwikstage (GKN) in addition to ringlok (Layher)

Cuplok galvanized scaffold system. it can be a well –proven heavy –duty support system. yet one that is relatively light and easy to collect. it is as multi- purpose system, suitable not only for false work support but access too, and is particularly suitable for building and civil anthropological projects like motorway bridge together with office and retail developments.

Notes: - Design Elements
Grid Sizes: -
The capacity of cuplok draws on 1. 8m and a reduced amount of horizontal lengths. if ONLY TWO. 5m horizontals are applied, the loadings will always be:
1. 5m lifts 60kn
A COUPLE OF. 0 lifts 45kn
Exterior Verticals: -
The Loading capacities shown are dependant on internal verticals restrained in most four direction. For external verticals restrains in either a couple of the safe working loads may perhaps be reduced by up for you to 20%.
Eccentric Loads: :
The Loading Diagram is based on eccentric loads of around 25mm and fully long base head jaks from a ‘worst case’ situation.



Bulkier Loads -74Kn: -
If jack extensions are generally below 35mm and standard eccentricities do not excedd 5mm, loads might be increased to 74Kn.
3-Lug Cuplok: -
The information shown above only pertains to high grade Cuplok, Which is identified by 4 Lugs on the Top Cups. if 3-Lug Cuplok Verticals are introduced in the structure a reduced capability applies as follows.
Elevate Verticals
Height Loading
A SINGLE. 0m 57kN
1. 5m 45kN
A COUPLE OF. 0m 33kN
Bracing: -
The permissible le tons on verticals and jacks in cuplok false work structure are according to suitably braced structures in accordance with HKL’S Design recommendations.
https://www.tp-scaffold.com/Cuplock-scaffolding-pl576771.html

201911ld