Blog Posts

Plastic Rigid IBC Market Growth| COVID-19 Analysis

Posted by sagar on October 1, 2020 at 10:51am 0 Comments

On the contrary, the high risk of occupational hazard that is involved in the production of plastic rigid IBC is likely to threaten its market growth. Additionally, the lack of proper protection protocol in the transportation of chemicals can hinder the expansion of the Plastic Rigid IBC Market Growth.

Segmental Overview

The Plastic Rigid IBC Market Growth segment study is…


What factors affect the marking speed of a fiber laser marking machine?

Consumers in the market have continuously increased their requirements for product quality and the right to know information, which has motivated merchants to increase the amount of information and improve the quality of product packaging. In addition, with the adjustment of industrial modernization, more companies recognize the importance of laser processing equipment. It is a very important link to improve enterprise economic efficiency, processing cost, speed, etc., and for production efficiency, it is One of the key points that manufacturers focus on

The function of the fiber laser marking machine is to provide the company with higher productivity and create a higher market value. So how to strengthen the marking speed of the fiber laser marking machine?

The key factors that directly affect the fiber laser marking machine can be divided into two aspects: internal factors and production and processing products.
1. The key internal factors are the laser frequency, laser spot mode and beam divergence angle, laser power, scientific and reasonable optical shaping, and other auxiliary gases and substances for production and processing. The key internal factors are paid special attention during the selection of the previous work model, and should be purchased in accordance with the recommendations of the laser technical engineer.
2. In addition, the key factors require special attention from customers during production and processing. The key are the marking volume density, the marking format, the marking depth, and the laser spot size.
3. Marking bulk density: Under the same format, same spot, and same depth, the higher the bulk density of the marking, the slower the corresponding marking speed. The reason is that the bulk density directly increases the marking area. .
4. Marking format: As the deflection area of the large format marking galvanometer is increased, the marking speed of the large format is slower than that of the small format.
5. Marking depth: According to the requirements, if the depth of the marking needs to be deepened, the technical parameters of the fiber laser marking machine must be adjusted to enhance the power, current and other factors of the fiber laser marking machine. Medium will directly affect the marking speed.
6. Laser spot size: The smaller the spot size, the smaller the marking volume. Therefore, the larger the spot size, the faster the marking speed.

Views: 1


You need to be a member of On Feet Nation to add comments!

Join On Feet Nation

© 2020   Created by PH the vintage.   Powered by

Badges  |  Report an Issue  |  Terms of Service