Blog Posts

The automobile that was targeted by a police laser gun

Posted by Perfect Jammer on April 23, 2024 at 10:53pm 0 Comments

You're driving down the road, minding your own business, and suddenly you spot an officer parked on the side of the road pointing something at your car that looks like a radar gun. Your trusty radar detector never makes a peep, though. The first thoughts that race through your mind: Is my detector broken or did the cops get some new radar gun that my detector can't detect?

Chances are the answer to both questions is no. What happened is that you were shot with a police laser…

Continue

What to do When Hp Printer is not Printing

An HP printer, especially an inkjet printer, may have issues with printing. One of a person's printing problems is when the HP printer not printing . Often the proprietor thinks the black ink is small and requires a fresh substitute, only to find out the issue is not solved by the fresh printer cartridge. Hp printer won't print the black ink. We believed it was ink but it was substituted and the black ink is still not going to be printed. It functions as its printing, but it is almost as if the parts of black printing do not work.

Resolving Issues When the Hp Printer not printing . The black ink won't print on our printer. We thought it was out of ink but replaced it and the black ink still won't print. It acts like its printing but it's almost like the black printing components aren't working. You can easily solve that issue just following giving instruction. Identify any defects with the black text on the page, the black ink cartridge is the problem.

There are several reasons your HP printer not printing. The only way to find the solution is to remove the cartridges and start diagnosing the problem from there. Here are some steps to resolve this issue:-

1. Turn on printer and open lid cover to cartridge compartment. If you are using an HP Photo smart, wait for the cartridges to stop in the middle before removing them. Be careful not to touch the print head.
2. Next, lift the lever that locks the cartridge container. Remove the cartridge compartment.
3. Your ink cartridges might be okay and new but your print head might be full of gunk and dried inks.
4. To clean, you can ran or dip the container under a warm water to dissolve dried inks.
5. Once cleaned, dry the container with clear tissue or paper.
6. Put it back into the printer and lock into place. Reinstall the ink cartridges and run test print..

Views: 3

Comment

You need to be a member of On Feet Nation to add comments!

Join On Feet Nation

© 2024   Created by PH the vintage.   Powered by

Badges  |  Report an Issue  |  Terms of Service