The installation of the kitchen granite sink looks simple, but if the previous installation neglects, the dirt, rust, water leakage, etc. on the edge of the kitchen granite sink will cause trouble for later use. So how is the kitchen granite sink installed? What kind of kitchen granite sink material is it? Let's take a look at it?

How to install the kitchen granite sink:

1. Reserve the location of the kitchen granite sink

Although the installation of the kitchen granite sink needs to be renovated in the kitchen, the size and location of the kitchen granite sink should be planned in advance to avoid rework and delay the construction period.

2, the kitchen granite sink is placed in the countertop

Install the faucet and inlet pipe before placing the kitchen granite countertop. Pay attention to the seal between the kitchen granite sink and the countertop. There must be no gaps, etc. Otherwise, it will leak and accumulate dirt in the later stage, which is difficult to clean.

3, sealed filter and overflow hole

Below the installation faucet is an overflow hole. In order to prevent the water inside the granite sink of the kitchen from overflowing the countertop, the filter under the granite sink of the kitchen is used to prevent the residue from clogging the pipeline. It must be sealed during installation, otherwise it will be easy to seep. Into the cabinet, causing the cabinet to mold.

4, test water and edge banding

Finally, after installing the kitchen granite sink hangs, you can start testing the water. After filling the water, look at the drainage situation, whether there is water seepage, etc. If there is no problem, you can use silicone seal.