The important parts of raymond mill are made of high-quality steel, and the wear parts are made of high-performance wear-resistant materials. The wear resistance of the whole machine is high and the operation is reliable. The process of eliminating the innovation and intelligence of R&D test machine is Raymond Mill. The manufacturers will do the market development process, from the perspective of innovation, with environmental protection technology as the primary development goal, on the basis of the original function enhancement, production increase, production line automation process.
Raymond mill has a large output. On the basis of the same finished product demand, the use of Raymond mill is usually more economical and effective than the airflow mill, which greatly reduces equipment investment costs, saves the use of the site, and repairs. Maintenance costs are relatively reduced. In the production of ultra-fine Raymond machine, if the feed rate is too fast, the load will increase and the machine will be blocked. Therefore, during the Raymond mill feeding process, the user should pay attention to the change of the deflection angle of the ammeter pointer. If the rated current is exceeded, the motor is overloaded. It is worth noting that if the motor is overloaded for a long time, it will burn out the motor. At this time, the door should be immediately reduced or closed, and the way of feeding can be changed, and the amount of feed can be controlled by adding a feeder.
The main blade holder is always in contact with the material during operation, so the blade holder is composed of two parts. The lower seat is worn and the connecting bolts can be changed. The Raymond mill manufacturer specializes in producing various types of grinding equipment and drying. Dry machine, crusher, shredder, wood powder machine, etc., advanced production technology, reasonable price, quality assurance, welcome to consult and purchase!