hans zimmer tennessee download midi

Name: hans zimmer tennessee download midi
Category: Downloads
Published: ringlidiscni1970
Language: English

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The following example shows a PPPoE over Ethernet configuration. In the example, the virtual-template 1 virtual template is linked to the VPDN group. The configuration also specifies the number of sessions allowed on the VPDN group.
Note The Cisco 10000 ESR supports a Fast Ethernet interface for management traffic only.
PPPoE over Ethernet Feature.
Download Options.
The Cisco 10000 ESR must be running Cisco IOS Release 12.2(4)BZ1 or a later release that includes the broadband aggregation features.
Creating an Ethernet Interface and Enabling PPPoE.
Associates a VPDN group to a customer or VPDN profile.
Enables VPDN configuration on the router.
Specifies the maximum number of PPPoE sessions that can be terminated on this router from all interfaces.
Prerequisites.
To configure the PPPoE over Ethernet feature, perform the following configuration tasks:
Router(config-vpdn)# pppoe limit per-mac number.
Router(config)# vpdn group name.
Configuration Tasks.
Creates an accept dial-in VPDN group.
Router(config)# interface GigabitEthernet number.
The Cisco 10000 series ESR supports the PPPoE over Ethernet (PPPoEoE) and PPPoE over IEEE 802.1Q VLANs feature in Cisco IOS Release 12.2(4)BZ1 or a later release. IEEE 802.1Q encapsulation is used to connect a VLAN-capable router with another VLAN-capable networking device.
Specifies the virtual template interface to use to clone virtual access interfaces (VAIs).
The Cisco 10000 ESR supports a PPPoE over Ethernet connection. PPPoE over Ethernet enables direct connection to an Ethernet interface. The Cisco 10000 ESR supports PPPoE over Ethernet sessions to enable multiple hosts on a shared Ethernet interface to open PPP sessions to the PPPoE server.
The PPPoE over Ethernet feature has the following restriction:
• The Cisco 10000 ESR currently supports the PPPoE over Ethernet feature only on a Gigabit Ethernet interface.

This chapter discusses the PPPoE over Ethernet and IEEE 802.1Q VLANs features for the Cisco 10000 ESR. For more information, refer to the "Configuring Broadband Access: PPP and Routed Bridge Encapsulation" chapter in the Cisco IOS Wide-Area Networking Configuration Guide .
Table Of Contents.
Enables PPPoE and allows PPPoE sessions to be created through that interface.
Configuring a Virtual Template Interface.
To configure a virtual private dial network (VPDN) group for PPPoE and to link it to the appropriate virtual template interface, use the following commands beginning in global configuration mode:
Router(config-vpdn)# accept dialin.
Router(config)# vpdn enable.
Configuring PPPoE in a VPDN Group.
PPPoE over Ethernet and IEEE 802.1Q VLANs.
Router(config-vpdn)# pppoe limit max-sessions number.
Restrictions.
Configuring PPPoE over Ethernet and IEEE 802.1Q VLAN.
Router(config-vpdn-acc-in)# protocol pppoe.
Available Languages.
We recommend that you configure a virtual template before you configure the PPPoE or PPPoE over Ethernet feature. The virtual template interface is a logical entity that is applied dynamically as needed to an incoming PPP session request. To configure a virtual template interface, see the "Configuring a Virtual Template Interface" section on page 3-11 .
Creates an Ethernet interface and enters interface configuration mode.
Router(config-vpdn-acc-in)# virtual-template template-number.
To create an Ethernet interface and enable PPPoE on it, use the following commands beginning in global configuration mode:
Specifies the maximum number of PPPoE sessions that can be sourced from a MAC address.
Configuration Example.
Router(config-if)# pppoe enable.
Specifies the VPDN group to be used to establish PPPoE sessions.
http://www.onfeetnation.com/profiles/blogs/g-download-for-windows