hardcore darkcore set en mix download

Name: hardcore darkcore set en mix download
Category: Download
Published: masandspicit1981
Language: English

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The host's /etc/udev/rules.d/70-persistent-net.rules says: Code: Select all Expand viewCollapse view # PCI device 0x10ec:/sys/devices/pci0000:00/0000:00:1c.1/0000:01:00.0 (r8169) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR =="00:19:66:a0:61:5f", ATTR.
Ifconfig on the guest gives me: Code: Select all Expand viewCollapse view eth0 Link encap:Ethernet HWaddr 08:00:27:bb:44:07 inet addr:192.168.33.103 Bcast:192.168.33.127 Mask:255.255.255.192 inet6 addr: fe80:a00:27ff:febb:4407/64 Scope:Link UP BROASCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:85 errors:0 dropped:0 overruns:0 frame:0 TX packets:11 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:9735 (9.5 KiB) TX bytes:1298 (1.2 KiB) Interrupt:10 Base address:0xd020.
VBoxManage modifyvm " MyVirtualMachineName " --natpf1 "guestweb,tcp,,80,,80"
Ghhh, never mind, someone from Friendica just clarified it for me. It turns out their solution for hosting your own server is simply not general enough, as it caters only to people who have their own router and their own little network at home. In my case, since I have only one computer that connects directly to the ISP, I have to select NAT instead of Bridged as the network setup for the guest machine, plus I have to add a port forwarding rule (at least) for port 80 for the guest machine, with a command like this:
Here's what I have on the guest in /etc/udev/rules.d/70-persistent-net.rules: Code: Select all Expand viewCollapse view # PCI device 0x1022:2000 (pcnet32) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR =="08:00:27:bb:44:07", ATTR.
So at step 7 of the gu >no working connection at this point: I can't ping the outside world, nor do I get a response if I ping the guest from the host.
# PCI device 0x10ec:/sys/devices/pci0000:00/0000:00:1e.0/0000:03:01.0 (8139too) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR =="00:0e:2e:f0:a4:01", ATTR.
And ifconfig on the host gives me: Code: Select all Expand viewCollapse view eth0 Link encap:Ethernet HWaddr 00:19:66:a0:61:5f inet6 addr: fe80::219:66ff:fea0:615f/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:18010 errors:0 dropped:0 overruns:0 frame:0 TX packets:15020 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:16613942 (16.6 MB) TX bytes:2649767 (2.6 MB) Interrupt:43 Base address:0x8000.
I'm trying to run this pre-packaged Debian server image: downloads . friendica . eu/Friendica . zip . on top of my Ubuntu 12.04 that connects to my ISP directly via PPPoE (I don't have my own router) . according to these instructions: github . com/friendica/friendica/wiki/How-to : -Hosting-a-Friendica-site-at-home . using VirtualBox v4.1.12.
virtualbox.org.
Re: (Debian + Br > by donjoe » 1. Sep 2012, 18:35.
What can I do to make this thing work?

And now I can finally ping Google from inside that little sucker.
Board index ‹ General ‹ VirtualBox on Linux Hosts Change font size Print view FAQ Login.
Here's my guest's /etc/network/interfaces: Code: Select all Expand viewCollapse view # The loopback network interface auto lo iface lo inet loopback.
lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:8 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:560 (560.0 B) TX bytes:560 (560.0 B)
End user forums for VirtualBox.
(Debian + Br >Discussions related to using VirtualBox on Linux hosts.
Then on the host I have in /etc/network/interfaces: Code: Select all Expand viewCollapse view auto lo iface lo inet loopback.
(Debian + Br > by donjoe » 1. Sep 2012, 17:58.
ppp0 Link encap:Point-to-Point Protocol inet addr:79.114.59.224 P-t-P:10.0.0.1 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1 RX packets:17089 errors:0 dropped:0 overruns:0 frame:0 TX packets:14329 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:3 RX bytes:16158179 (16.1 MB) TX bytes:2309628 (2.3 MB)
eth1 Link encap:Ethernet HWaddr 00:0e:2e:f0:a4:01 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:22 Base address:0xd800.
lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:32 errors:0 dropped:0 overruns:0 frame:0 TX packets:32 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2388 (2.3 KB) TX bytes:2388 (2.3 KB)
#The primary network interface allow-hotplug eth0 iface eth0 inet dhcp.
http://denbubadcpit1978.eklablog.com/8308-0-winman-download-5-3-a17...