hardcore speedcore download

Name: hardcore speedcore download
Category: Downloads
Published: epphlicneho1973
Language: English

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Connection of client Run pppoeconf in client's console, client# pppoeconf.
PPPoE Server Under Ubuntu/Debian.
Final testing , Both client and server will get the ip and they are able to ping each other.
QUICKSTART Method : "If you're lucky, the "quickstart" method will work. After unpackingthe archive, become root and type" root@pppoe:/var/tmp# cd rp-pppoe-3.10/ root@pppoe:/var/tmp/rp-pppoe-3.10# ./go.
Networking and System Administration.
Networks and System Administration related stuff. Linux and Windows servers administration material and tutorials.

Open README file and go through it.There are 3 methods I shall go for first one, QuickStart method.
Testing and Troubleshooting Open the /var/log/syslog in server and monitor, There are some problems which need to fix After fixing the issue, reconnect the client and monitor the log on server. client# pppoeconf.
Script that start the PPPoE server with NAT option Create a script pppoe-up and chmod to 755. root@pppoe:/etc/ppp# nano pppoe-up root@pppoe:/etc/ppp# chmod 755 pppoe-up.
It setted up ultimatley, I spent some time, checking the script carefully, running and testing several times before it was fixed.
2) Configuration Server side : Go the to /etc/ppp, Many files, but interested are , pppoe-server-options, pppoe.conf, options,pap-secrets,chap-secrets PAP is default authentication method, I let it. root@pppoe:/etc/ppp# nano pap-secrets You can change the authenticaion method from follwing file root@pppoe:/etc/ppp# nano pppoe-server-options.
This will use to connect the pppoe server.
Wednesday, May 13, 2009.
Client Side : # apt-get install pppoeconf.
a) Change following in /etc/ppp/options file, some to them already uncommented. In case of chap as authentication, the file looks like root@pppoe:/etc/ppp# nano chap-secrets.
PPPoE Server Setup: Operating System: Ubuntu Desktop(8.04)
It will search for pppoe server on ethernet server. Once it found on, in this case in eth0 it will prompt for user name: test and passwd: test.
Client side Install pppoeconf, which may be already installed. apt-get install pppoeconf.
I got some gcc error, fixed it by installing "build-essential", This will install gcc and a some other files that need to build something from source.root@pppoe:/var/tmp/rp-pppoe-3.10# ./go.
You will get messeg, "Congratulations, it should be all set up!" Type 'pppoe-start' to bring up your PPPoE link and 'pppoe-stop' to bring it down. Type 'pppoe-status' to see the link status.
Execute the pppoe-up script in server. root@pppoe:/etc/ppp# ./pppoe-up.
1) Installation of Softwares: Server Side a) ppp apt-get install ppp b) pppoe apt-get install pppoe c) rp-pppoe (I used rp-pppoe-3.10.tar.gz) RP PPPoE; can be obtained from, http://www.roaringpenguin.com/products/pppoe After download Move it to some place e.g /var/tmp, unpack and change permission.
http://peloheamondeochub.eklablog.com/945p-a7a-driver-download-7-11...