igo superpad 3 download
Name: igo superpad 3 download
Category: Free
Published: oddietomag1979
Language: English
Programming download icom ic f3s-3.
Programming an Icom M710.
Virtually all SSB communications are conducted using the frequency and mode data stored in the 160 radio channels/memory locations in the User Channel Group. Any or all of these 160 User Memory Channels can be reprogrammed either manually, or by computer. Here's how to manually reprogram a User Channel:
There are two large knobs, a keypad, and a Mode button on the front of the radio. These are the tools used to reprogram frequency and mode data in the radio.
The large left-hand knob is the Group Channel Selector knob . Use it to select the channel group you want to use.
The right-hand knob is the Channel Selector knob . Use the Channel Selector knob to select a radio channel within a selected Channel Group.
The CH/Freq keypad key toggles the radio LCD dial display between Channel and Frequency.
The Mode button selects USB, LSB, H3E, etc., modes. Note: ALL marine SSB communications are conducted in the USB mode.
Programming the M710 is a three-step process:
Step-1: Program the Receive Frequency. Step-2: Program the Transmit Frequency. Step-3: Rewrite the channel name/label.
http://tabsidisib1982.eklablog.com/gigabyte-k8vt800-driver-download...