illusion design v4.2 character downloads

Name: illusion design v4.2 character downloads
Category: Downloads
Published: provseaderttins1987
Language: English

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Amateur Radio Software.
Motorola Tetra Radio, MotoTRBO Radio, Commercial Series Radio, Astro 25 Radio, Professional Radio, Trunking Radio, MPT Radio, Alpha Radio, Select-5 Radio, Kenwood Radio, Yaesu Radio, Icom Radio, Vertex Radio, Alinco Radio, etc.
Friday, July 17, 2009.
Kenwood KPG-56D (TK-260G 270G 272G 278G 360G 370G 378G 388G 760G 762G 768G 860G 862G)
A. INTRODUCTION.
KPG-56D software is a tool for programming TK- 260G,TK- 270G,TK- 272G,TK- 278G,TK- 360G,TK- 370G,TK- 372G,TK- 378G,TK-388G portable transceivers and TK-760G,TK- 762G,TK- 768G,TK- 860G,TK- 862G,TK- 868G mobile transceivers using this software, first enter programming data into the appropriate computer, and then transfer the data to a transceiver. You can print out that data from a printer. You can also retrieve data from a transceiver to edit on the computer.
Your programming software package includes the followings:
* Floppy disks (3.5", 1.44 MB)
KPG-56D PROGRAMMING DISK (program files)
This programming software supports the following transceivers:
TK-760G (Mobile: VHF) TK-762G (Mobile: VHF) TK-768G (Mobile: VHF) TK-860G (Mobile: UHF) TK-862G (Mobile: UHF) TK-868G (Mobile: UHF) TK-260G (Portable: VHF) TK-270G (Portable: VHF) TK-272G (Portable: VHF) TK-278G (Portable: VHF) TK-360G (Portable: UHF) TK-370G (Portable: UHF) TK-372G (Portable: UHF) TK-378G (Portable: UHF) TK-388G (Portable: UHF)
HARDWARE/ SOFTWARE REQUIREMENTS.
Computer: The software was designed for use on IBM PC, AT, PS/2 and compatible computers with Conventional Memory capacity of at least 530 KB.
Operating system (OS): The operating system must be Microsoft Windows 98/2000/Me/XP.
Communication port: The computer must have a serial communication port to connect with a transceiver.
This port must be compatible with an IBM asynchronous communications adapter. You may use the port from COM1 to COM20 on the computer.
Connection cable: Use a KPG-22 (for portable) or a KPG-46 (for mobile) cable to connect the computer with the transceiver.
B. CONNECTING THE EQUIPMENT: 1. Switch OFF the power to the computer.
2. Connect the 25-pin connector on the KPG-22/46 cable to the port of COM1 to COM20 on the computer. If the COM port has 9 pins, use a commercially available 9-pin/25-pin adapter.
3. Switch ON the power to the computer.
4. Switch OFF the power to the transceiver.
5. Connect the other end of the KPG-22/46 cable to the universal connector on the transceiver.
6. Switch ON the power to the transceiver.
C. Read Data from Radio: This function reads all program data from the transceiver flash memory.
1. When "Read Data from radio" is selected, the "Read Data from radio" window opens.
2. Select "[Read]" or "[Cancel]".
If communication with the transceiver is not possible for any reason, the "Check Connection Error" window will open. Confirm that the transceiver is correctly connected to the computer via a KPG-22/46 cable, then select "[Retry]".
D. Write Data to Radio: This function writes data into the transceiver flash memory.
1. When "Write Data to Radio" is selected, the "Write Data to Radio" window opens.
2. Select "[Write]" or "[Cancel]". "[Write]" writes data into the transceiver. "[Cancel]" aborts the write function and re-displays the Program menu.
If communication with the transceiver is not possible for any reason, the "Check Connection Error" window opens. Confirm that the transceiver is correctly connected to the computer via a KPG-22/46 cable, then select "[Retry]".

http://odkonmadewordce.eklablog.com/959nf-download-3d-a180290106