illusions+richard bach+pdf+free download

Name: illusions+richard bach+pdf+free download
Category: Downloads
Published: carnextdedi1983
Language: English

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CHIRP.
Задачи.
Сохраненные запросы.
New Model #3279.
Kenwood TK-270 (older non G model)
Статус: Closed Начата: 04.02.2016 Приоритет: Normal Дата выполнения: Назначена: - Готовность:
Категория: - Версия: - Chirp Version: daily Equipment Loan Offered: Да.
Описание.
This is a request for the older portables in the Series/Family 60 from Kenwood; This will comprise the following radios:
TK-260, 270, 272, 278 (VHF part) TK-360, 370, 372, 378 (UHF part)
I have borrowed a TK-270 from a friend and received a non functional TK-378 as a gift (CPU works ok, RX kind of "work", TX no go)
With this I hope to map the entire Family. I have figured out the comm process that is similar but different of the mobile ones (TK-760 and others) so this will be a completely different driver. Until now I have mapped 90% of the channel data, remains in TODO list:
Finish the mapping. Hack this in hand radios to retrieve the unique ID for each model/variant for the family. Watch for differences in the respective models and handle this. Make the settings part. Validate the driver against PEP8/Chirp's test bed.
Kenwood_TK-270.img - Image for the TK-270 (1 КБ) Pavel Milanes, 06.02.2016 09:31.
Kenwood_TK-378.img - Image for the TK-378 (1 КБ) Pavel Milanes, 06.02.2016 09:31.
Связанные редакции.
[TK-270] New Model, add support for the TK-260/27x/360/37x series, fixes #3279 Initial support for the older serie 60 (non G) family/series from Kenwood portable radios, both VHF and UHF ones.
[PATCH][TK-270] Fix a missing txenable flag, Fixes #3279.
A flag for txenable on set_channel was missing and was causing the TX freqs of all channels edited by chirp to get not on the freq you programmed.
Sorry for the inconvenience.
История.
Параметр Готовность изменился с 40 на 70 Параметр Chirp Version изменился с 0.4.0 на daily.
Update, last night I completed the following issues:
Hack the in hand radios to retrieve the unique ID for each model/variant for the entire family. (Ufff. between 2 and 4 variant for each model. ) Make the settings part (with the most ham used ones)
In the TODO remains:
I have finished the mapping but there is a problem with new channels not being recognized by the radio beyond CH7, I have to investigate the issue to resolve that. As for now there is no evident difference in the respective models/variants, I will keep an eye on this. Validate the driver against PEP8/Chirp's test bed. (this is the last part)
Параметр Готовность изменился с 70 на 100.
Good news, today I will submit the first working driver.
The problem mentioned about the CH7 and beyond is fixed, no differences was spotted on the different models/variant in the mem layout and the driver is PEP8 compatible now.
I found a bug and fix it, it was about the radio after a hardware reset, some setting appears with 0xFF and that is not a valid value for the get_settings, I make a validation for that with some default values.
Also I put in place a retry procedure for getting the radio in program mode, a lesson learned from the TK-760 one.
I build the driver with a TK-270 and a TK-378 in hand, so there can be some bugs for the other members of the family/series.
The driver is marked as experimental until it is tested to be working and no bugs found in some time.

http://jechalihuss1976.eklablog.com/86-dos-download-123-a179563604