ipc-6012 download
Name: ipc-6012 download
Category: Downloads
Published: cregunivra1987
Language: English
XenServer 7.3+ don't work on HP BL460c G6 server.
I have 2 identical HP BL460c Gen6 servers with HP NC532i network.
The first server has the latest firmware from HP SPP 2017.4, the second server with firmware 2010 year.
The problem is the same - after successful clear installation of XenServer 7.3 or 7.4, network doesn't work. I see in my xsconsole 2 nic as Broadcomm NetXtreme II BCM57711E card eth0 and eth1 with the status "not connected". Lspci show, that I have 2 network pci card, but /network-scripts/ have only eth-lo interface. There is no eth0. If I try to configure management interface with DHCP - config is failed 'timed out'.
Any commands that show the network interface don't work, output black screen and freeze console, don't even work ctrl+c.
dmesg show, bnx2fc: bnx2fc FCoE not supported on eth0, flag: 10.
In addition, servers does not turn off, "reached target shutdown".
But if I use XenServer 7.2 or lower, all works fine. The network is running, the servers are shutdown within 1 minute correctly.
Another server HP BL460c Gen7 was updated to 7.4 XenServer and work fine.
Xenserver 7.3+ doesn't support old servers? Or what could be the problem?
http://vesperpblogin.eklablog.com/mfradio-java-download-a177934904