Your deck needs regular maintenance. This is exposed to severe weather, and can deteriorate easily. Before doing any repairs make sure the decking is thoroughly washed. Use a pressure washer to get rid of dirt and fibers where possible. The pressure flux has be rising, otherwise the wood surface will be scratched. Allow the platform to dry for a minimum of 12 hours before Cedar Painting.
How to fix issues in Deck
Use hammer to fix the loose nails. While replacing the board it is advisable to use a screw that is longer than the nail. Cracked wood is something of an eyesore. Remove or patch it, so that your deck will always look good. When the timber board is torn right down the middle, mark the broken wood next to the support rafter boundary outside the break. Always mark the spot straight above the plate. This can dent your saw otherwise.
Before you begin the sanding process all the nail or head of screw should be buried in the wood.
The deck is vulnerable to humidity and sunlight. So sealing and stain is necessary. Might not be enough to use pressure-treated timber. To preserve the wood without causing discoloration, look for a transparent wood preservative with a ultra-violet protector. This will give the surface a touch of freshness while protecting it from the natural elements. Before painting it, opt for an exterior Timber Staining Auckland.

Always wear eye glasses and protective gloves. Use a roller-brush to apply preservatives or stains. The chemicals should be on the wood deck for at least 20 minutes, so that they penetrate the lumber.
If the timber has developed black spots or gray from the effects of the weather deck, cleaning with a commercial deck cleaning and Cedar Weatherboard Maintenance should be recommended by the manufacturer-application, protection of adjacent surfaces and equipment and the time before applying the intended surface. We recommend you use the deck cleaner provided by the manufacturer with the intended finish.
Finishes should be applied, rather than the entire width, to run from adjacent boards along the entire length of the timber deck. The gap between the boards can then be used to separate each run, in order to avoid duplication of finish, resulting in a mosaic floor appearance.
Decking oils usually contain UV inhibitors which may slow down timber’s natural graying over time. When Timber decking has started turning silver gray, the color can be restored by applying a colored decking stain, which is better applied at the right times for the production of solid gray color. Spruce will still occur under one roof, but it will take longer due to less direct UV exposure.
Use a similar option as for the original coat when applying timber decking oil or stain as a service for coating. Carry out preparation and further application according to the recommendations of the manufacturer.