Aluminum sheet curtain wall has the advantages of rich color, long-lasting, diversified appearance, low cost and high cost performance, which has been widely used in curtain wall engineering, but the sealing failure is the main problem of aluminum plate curtain wall. Through the analysis of this paper, joint design, sealant selection, construction quality and environment are the key factors affecting the perfect sealing of aluminum panel curtain wall.

Large area windows and even glass curtain walls are often used. High visual expansion: fluorocarbon aluminum veneer can generally expand the indoor area, especially the glass transparent fluorocarbon aluminum veneer, the effect, in a better lighting environment, can also increase the ceiling lighting, reduce humidity. All the aluminum veneer paint adopts the environmental protection paint with clean taste technology suitable for all villas. Orange peel, aluminum roll, antiskid aluminum plate, aluminum rod, aluminum row, medium thickness aluminum plate, aluminum plate price, aluminum skin price, aluminum skin manufacturer, aluminum skin material, aluminum skin alloy content, aluminum skin thickness, aluminum skin insulation, aluminum skin hardness, chemical plant aluminum sheet, aluminum sheet, aluminum sheet mechanical properties, aluminum insulation, 0.5 aluminum sheet, 0.8 aluminum sheet, 0.4 aluminum sheet, 0.3 aluminum sheet, 0.6 aluminum sheet, weatherability and corrosion resistance Good sex. 6 series Al Mg Si alloy_ Hall_ 8.0~50mm_ Aluminum veneer curtain wall panel has good corrosion resistance, fluorocarbon paint can reach 25 years. The process is good. Aluminum plate can be processed into plane, arc and spherical surface.

In general, the protective film should be in theTear off the aluminum veneer about a week after extruded L shape aluminium profile the completion of the project, and clean the aluminum veneer with neutral detergent. However, season and temperature should be the key consideration. If it is outdoor in summer, the protective film should not be under direct sunlight for a long time, otherwise it will cause aging of the protective film and increase the difficulty of tear film. Original title: [construction of aluminum panel curtain wall] aluminum panel curtain wall construction scheme aluminum (composite) panel curtain wall construction scheme aluminum panel curtain wall process flow: tools and machines used for curtain wall: toothless saw blade cutting machine, electric hand drill, impact drill, drill of various specifications, wrench, screw driver, hammer, ink line, plumb, nylon wire, steel tape, electric welding machine, oxygen cutting equipment Driven suction aluminium extrusion h profiles cup, electric hanging basket, glue injection, pneumatic riveting, safety belt, etc. ·The work before the material entering the site is the starting point of the project. The recognition and recognition of stone composite board, especially marble composite board, is getting higher and higher abroad.

Our company prepared TiO2 nano modified coating by adding nano powder of Ti02 into fluorocarbon coating, and then sprayed the coating on aluminum plate to form self-cleaning coating film to make nano self-cleaning fluorocarbon aluminum veneer. Under the catalysis of ultraviolet radiation, nano-TiO2 has two characteristics: Super oxidation and super hydrophilicity. It uses perforated aluminum veneer as the sunshade component, and through simple but firm installation, it realizes the use of more reasonable external sunshade window aluminium extrusions round tube setting. Modern buildings, especially large-scale office buildings, often use large-area windows or even glass curtain walls in order to limit the use of sunlight to improve the indoor environment. U.S. researchers have been working onThe results show that the solar radiation through glass is more than 30 times that of the wall. If some sunshade measures are taken, the heat flux will be reduced obviously, which only accounts for about 1 / 3 of the original throughput. It can be seen that proper shading design is very effective to reduce solar radiation.

Then fluorocarbon spraying was used. Vinylidene fluoride resin (kanar500) for fluorocarbon coatings, topcoats and varnishes. Generally, it can be divided into two, three or four coatings. Fluorocarbon coating has excellent corrosion resistance and weather resistance, can resist acid rain, salt spray and various air pollutants, cold and hot resistance, can resist strong ultraviolet radiation, can keep long-term color fading, non powdering and long service life. The fluorocarbon coatings produced by PPG, DNT, Akzo, Nippon, etc. For more details, please call foyama Zhengyi perforated aluminum veneer price service! When it is in the middle of the arc, it can be appropriately reduced through the single-sided curtain wall. When it's at the end of the arc, it needs to be magnified. Abstract: there is a big difference between the partial size coefficient of internal and external wind load of glass perforated aluminum double wall and that of single wall. The main influencing factors include the distribution of double curtain wall on the building surface, the opening of aluminum veneer, the distance between inner cavity and outer cavity, air circulation, etc.

Aluminum veneer manufacturer quotation consultation, aluminum veneer manufacturer quotation consultation, Nanhai aluminum veneer manufacturer quotation consultation --- call immediately to enjoy the price discount of this month. Aluminum decoration is a production and salesIt is a large-scale enterprise with supporting materials for decoration engineering, such as indoor and outdoor fluorocarbon aluminum veneer, aluminum veneer curtain wall, aluminum veneer ceiling, imitation stone aluminum veneer, wood grain aluminum veneer, punching aluminum veneer, etc.