Degol's Posts - On Feet Nation2024-03-19T11:10:40ZDegolhttps://www.onfeetnation.com/profile/Degolhttps://storage.ning.com/topology/rest/1.0/file/get/8240117053?profile=RESIZE_48X48&width=48&height=48&crop=1%3A1https://www.onfeetnation.com/profiles/blog/feed?user=2c9ql6sj5whh1&xn_auth=noDegol tell you : Window Stay installationtag:www.onfeetnation.com,2022-06-30:6595159:BlogPost:212043572022-06-30T10:30:00.000ZDegolhttps://www.onfeetnation.com/profile/Degol
<p>Degol tell you : Window Stay installation<br></br> 1.Begin by unscrewing and removing the original stay used to hold open your window (if there is one present). Fill the holes left by the fixings with a wood filler.</p>
<p>2.After the filler is completely dry, sand the wood smooth and paint, stain or varnish the newly filled area as required.</p>
<p>3.After closing the window, position the pins along the bottom of the window frame. The closer the fixing bracket of the stay against the opening…</p>
<p>Degol tell you : Window Stay installation<br/> 1.Begin by unscrewing and removing the original stay used to hold open your window (if there is one present). Fill the holes left by the fixings with a wood filler.</p>
<p>2.After the filler is completely dry, sand the wood smooth and paint, stain or varnish the newly filled area as required.</p>
<p>3.After closing the window, position the pins along the bottom of the window frame. The closer the fixing bracket of the stay against the opening edge of the casement, the more manoeuvrability you will have when opening and closing the window.</p>
<p>4.Fit the stay onto the pins. This will set the correct height for the stay. Using a pencil, dot the position of the stays fixing holes onto the casement frame.</p>
<p>5.Drill pilot holes and screw the stay to the casement frame.</p>
<p>6.Close the window and ensure it is tight against the frame. Position the pins under the stay so that each line up with holes to both ends of the stay.</p>
<p>7.Move the stay out of the way and pencil in the position of the fixing holes on the bottom of the window frame for each pin.</p>
<p>8.Drill pilot holes and screw the pins into the frame.</p>
<p>9.Make sure the stay fits over the pins and the window is shut tight.</p>Precautions for the use of fingerprint lockstag:www.onfeetnation.com,2022-05-18:6595159:BlogPost:274742932022-05-18T08:55:29.000ZDegolhttps://www.onfeetnation.com/profile/Degol
1. Use a suitable battery, preferably the one recommended by the manufacturer. In addition, when using the Fingerprint Lock, the user should try to use the same type and brand of batteries, and do not use different brands and different types of batteries.<br />
<br />
2. It is forbidden to contact the panel with corrosive substances to prevent damage to the surface coating.<br />
<br />
3. Do not hit or knock the casing with hard objects to prevent damage to the surface coating of the fingerprint combination lock.<br />
<br />
4.…
1. Use a suitable battery, preferably the one recommended by the manufacturer. In addition, when using the Fingerprint Lock, the user should try to use the same type and brand of batteries, and do not use different brands and different types of batteries.<br />
<br />
2. It is forbidden to contact the panel with corrosive substances to prevent damage to the surface coating.<br />
<br />
3. Do not hit or knock the casing with hard objects to prevent damage to the surface coating of the fingerprint combination lock.<br />
<br />
4. Fingerprint locks basically have built-in sophisticated electronic components, which may damage internal components or cause other serious consequences when disassembled by non-professionals. If you suspect that there is a problem with the fingerprint combination lock, it is best to consult a professional, or directly ask someone to come and repair it.<br />
<br />
5. If you are going to go out or not use the lock for a long time, please bring the mechanical key and remove the battery to ensure the service life of the lock.<br />
<br />
6. When collecting fingerprints, the finger strength is moderate, do not exert strong pressure.<br />
<br />
7. Because the fingerprint combination lock contains a lot of electronic devices, if water enters, it will interfere with the electronic circuit, etc., so the Fingerprint Lock should pay attention to waterproofing.<br />
<br />
8. After the door lock has been used for a period of time, when the battery power is low, the buzzer will emit a "Di Di" low-voltage alarm every time the door is opened. At this time, please replace the battery in time and pay attention to the installation of the positive and negative electrodes to ensure the normal use of the lock.<br />
<br />
9. For users with flat and thin fingerprints or younger users, it is recommended that you register your fingerprints with your thumb, and register more than 2 fingerprints for the same user to improve the success rate of fingerprint collection.<br />
<br />
10. Do not pull the slide cover, push it open and close with force, and use the slide cover correctly.<br />
<br />
11. Do not use substances containing alcohol, gasoline, thinner or other flammable substances to clean or maintain the fingerprint lock. Use a soft cloth to wipe the dirt on the fingerprint collection window, because after a long time of use, there will be dirt on the surface, which may affect normal use.<br />
<br />
Fingerprint lock is a kind of intelligent lock with human fingerprint as identification carrier and means. It is the perfect crystallization of computer information technology, electronic technology, mechanical technology and modern hardware technology. The above is all the knowledge about the use of Fingerprint combination Locks and the precautions for the use of fingerprint combination locks that I introduced to you today. I hope it can help you.HOW TO CHOOSE A DOOR HANDLE?tag:www.onfeetnation.com,2022-04-27:6595159:BlogPost:267581342022-04-27T01:27:24.000ZDegolhttps://www.onfeetnation.com/profile/Degol
1. Different brands and shapes cause price differences<br />
<br />
The price gap for door handles is reflected in branding and styling. Among the high-end door handles, many products are mainly imported from European countries, and the prices are also different according to different models and styles. High-end imported door handles are divided into a full set of imported and imported accessories and are assembled domestically. The prices of these two types are different. If the merchant says it is…
1. Different brands and shapes cause price differences<br />
<br />
The price gap for door handles is reflected in branding and styling. Among the high-end door handles, many products are mainly imported from European countries, and the prices are also different according to different models and styles. High-end imported door handles are divided into a full set of imported and imported accessories and are assembled domestically. The prices of these two types are different. If the merchant says it is imported, it can be required to issue a customs entry document. It is recommended to choose a well-known, quality-assured and after-sale door handle.<br />
<br />
2. Choose according to the style of home decoration<br />
<br />
There are many types of door handles on the market, and the combination of different door panels has different effects. Generally, the door handle and the purchased door are matched. If you want to buy a door handle yourself, you must consider the matching effect of the door handle and the door panel, and consider whether the position of the door and other conditions are up to standard.<br />
<br />
3. Touch and knock to distinguish between good and bad<br />
<br />
Check the finish color and protective film of the door handle for damage and scratches. The high-quality door handles are uniform in color and stable. If the lines of the door handles are distorted, it is not recommended to buy them. The high-quality door handles are smooth to the touch and easy to handle, and there is no stubble sticking or cutting hands.<br />
<a href="https://www.degolhardware.com/LH1052B-Stainless-Steel-Door-Knob-pd45825985.html">https://www.degolhardware.com/LH1052B-Stainless-Steel-Door-Knob-pd45825985.html</a>WINDOW WITH HANDLE WONT CLOSEtag:www.onfeetnation.com,2022-04-25:6595159:BlogPost:266709442022-04-25T01:01:29.000ZDegolhttps://www.onfeetnation.com/profile/Degol
1. The window with the handle cannot be closed. It is necessary to check whether there is any obstruction in the gap of the window. Sometimes it is because something obstructed accidentally when closing the window, which leads to the failure to close, but it is not very big. The problem, we just need to clear the obstructions.<br />
2. Some window shafts have deviated from the original track, or simply ran out, causing the window with the handle to not be closed. In this case, we need to install the…
1. The window with the handle cannot be closed. It is necessary to check whether there is any obstruction in the gap of the window. Sometimes it is because something obstructed accidentally when closing the window, which leads to the failure to close, but it is not very big. The problem, we just need to clear the obstructions.<br />
2. Some window shafts have deviated from the original track, or simply ran out, causing the window with the handle to not be closed. In this case, we need to install the shaft back to the original track, and then lift the window up. one time. 3. If it is some iron windows with handles, it will rust after a long time of use, and it will be tight when you push and pull the windows. You can put a few drops of lubricating oil on the rusted place, and it can be closed after a while. .<br />
4. There is another situation that the underside of the window is moved by pulleys, but if it is derailed. In this case, the window will not be closed, and the pulley needs to be stuck in the middle of the track.<br />
5. If the window with the handle is made of wood, and if the wood material is deformed later, it cannot be forced to close in this case. window handle upvc window handle aluminum window handle casement windows handle door & window handles window handle with key<br />
<br />
<a href="https://www.degolhardware.com/WH1030-Square-stainless-steel-window-handle-for-window-door-pd44629085.html">https://www.degolhardware.com/WH1030-Square-stainless-steel-window-handle-for-window-door-pd44629085.html</a>WINDOW WITH HANDLE WONT CLOSEtag:www.onfeetnation.com,2022-04-21:6595159:BlogPost:265240222022-04-21T01:28:41.000ZDegolhttps://www.onfeetnation.com/profile/Degol
1. The window with the handle cannot be closed. It is necessary to check whether there is any obstruction in the gap of the window. Sometimes it is because something obstructed accidentally when closing the window, which leads to the failure to close, but it is not very big. The problem, we just need to clear the obstructions.<br />
2. Some window shafts have deviated from the original track, or simply ran out, causing the window with the handle to not be closed. In this case, we need to install the…
1. The window with the handle cannot be closed. It is necessary to check whether there is any obstruction in the gap of the window. Sometimes it is because something obstructed accidentally when closing the window, which leads to the failure to close, but it is not very big. The problem, we just need to clear the obstructions.<br />
2. Some window shafts have deviated from the original track, or simply ran out, causing the window with the handle to not be closed. In this case, we need to install the shaft back to the original track, and then lift the window up. one time.<br />
3. If it is some iron windows with handles, it will rust after a long time of use, and it will be tight when you push and pull the windows. You can put a few drops of lubricating oil on the rusted place, and it can be closed after a while. .<br />
4. There is another situation that the underside of the window is moved by pulleys, but if it is derailed. In this case, the window will not be closed, and the pulley needs to be stuck in the middle of the track.<br />
5. If the window with the handle is made of wood, and if the wood material is deformed later, it cannot be forced to close in this case.<br />
window handle upvc window handle aluminum window handle casement windows handle door & window handles window handle with key<br />
<a href="https://www.degolhardware.com/WH1006-Black-Casement-Aluminium-Accessories-Door-And-Window-Handles-pd40478985.html">https://www.degolhardware.com/WH1006-Black-Casement-Aluminium-Accessories-Door-And-Window-Handles-pd40478985.html</a>The difference between a hinged full cover and a half covertag:www.onfeetnation.com,2022-04-18:6595159:BlogPost:264121442022-04-18T01:10:24.000ZDegolhttps://www.onfeetnation.com/profile/Degol
1. The difference between the threeThe so-called full-cover type means that the cabinet door completely covers the side panel, that is to say, when the cabinet door is closed, the cabinet door completely covers the side panel on the side of the fixed hinge, and the side panel is completely invisible from the appearance. That is full cover.However, the side panels of some cabinets contain patterns. If the side panels are used to show people, the integrity of the cabinet will be better. At this…
1. The difference between the threeThe so-called full-cover type means that the cabinet door completely covers the side panel, that is to say, when the cabinet door is closed, the cabinet door completely covers the side panel on the side of the fixed hinge, and the side panel is completely invisible from the appearance. That is full cover.However, the side panels of some cabinets contain patterns. If the side panels are used to show people, the integrity of the cabinet will be better. At this time, the coverless type will be used. As the name suggests, when the cabinet door is closed, the side panels will be completely exposed.There is also the last half-cover type, which is better understood. After closing the cabinet door, the cabinet door will cover half of the side panel, and the side panel can still be clearly seen at this time.Second, the use of the sceneThe full-cover type is generally used at both ends of the cabinet, and the side panels are covered, which looks more concise.The half-cover type is usually used in the middle part of the cabinet. For example, when there are cabinet doors on both sides, in order to prevent the cabinet door from colliding, it is necessary to reserve space. At this time, a half-cover type hinge is required. This type of hinge is also used in real life. largest hinge.If there are patterns on both sides of the side cabinet, wouldn't it be more unsightly if it was covered? At this time, coverless hinges are used, which are also mostly used at both ends of the cabinet.3. Extended understandingIn addition to full cover, half cover, and no cover, there are many names for hinge specifications on the market, such as straight bend, middle bend, big bend... However, as long as you can understand the above three items, you can understand other names the real meaning.The full cover hinge is mainly installed on the side panel and does not require any bending when opening the cabinet door, so it is also called straight bend or straight arm.The half-lid hinge requires a certain degree of curvature when opening the cabinet door, so it is also called a middle curve, a small curve or a forearm.Coverless hinges require the most camber to open the door, so they are also known as big bends or booms.<br />
<a href="https://www.degolhardware.com/DH1204-Black-Iron-Heavy-Duty-T-Strap-Shed-Hinge-Barn-Gates-Hinges-pd46977383.html">https://www.degolhardware.com/DH1204-Black-Iron-Heavy-Duty-T-Strap-Shed-Hinge-Barn-Gates-Hinges-pd46977383.html</a>What kind of material is the kitchen handle?tag:www.onfeetnation.com,2022-04-07:6595159:BlogPost:261956902022-04-07T01:37:39.000ZDegolhttps://www.onfeetnation.com/profile/Degol
<p>At present, the handle materials in the market include copper, ceramic, zinc alloy, stainless steel and aluminum alloy, etc. The handle of each material has its own characteristics and matching style, so it can be selected according to specific needs. The copper handle has a hard texture and a retro style, with a full European classical flavor, suitable for matching European-style cabinets; the ceramic handle is smooth, bright, tidy and silky to the touch, suitable for matching with Chinese…</p>
<p>At present, the handle materials in the market include copper, ceramic, zinc alloy, stainless steel and aluminum alloy, etc. The handle of each material has its own characteristics and matching style, so it can be selected according to specific needs. The copper handle has a hard texture and a retro style, with a full European classical flavor, suitable for matching European-style cabinets; the ceramic handle is smooth, bright, tidy and silky to the touch, suitable for matching with Chinese classical style or pastoral style cabinets; stainless steel and aluminum alloy materials The handle is not easy to rust, the surface is smooth and bright, sturdy and durable, which is suitable for matching with modern cabinets; the stainless steel handle that has been processed by the process has very good corrosion resistance and scratch resistance, and is very modern; the zinc chrome alloy handle has a bright surface, Beautiful and stylish, suitable for modern and industrial styles. Although the cabinet door handle looks small, it is inseparable from its assistance and decoration in life! The handle of the cabinet door must be selected well, the more details, the better the overall quality.<br/> <a href="https://www.degolhardware.com/CK101-Brushed-Brass-Hexagon-Knobs-Pull-for-Bedroom-Cabinet-pd47763985.html">https://www.degolhardware.com/CK101-Brushed-Brass-Hexagon-Knobs-Pull-for-Bedroom-Cabinet-pd47763985.html</a></p>What kind of material is the kitchen handle?tag:www.onfeetnation.com,2022-04-07:6595159:BlogPost:261955802022-04-07T01:37:34.000ZDegolhttps://www.onfeetnation.com/profile/Degol
<p>At present, the handle materials in the market include copper, ceramic, zinc alloy, stainless steel and aluminum alloy, etc. The handle of each material has its own characteristics and matching style, so it can be selected according to specific needs. The copper handle has a hard texture and a retro style, with a full European classical flavor, suitable for matching European-style cabinets; the ceramic handle is smooth, bright, tidy and silky to the touch, suitable for matching with Chinese…</p>
<p>At present, the handle materials in the market include copper, ceramic, zinc alloy, stainless steel and aluminum alloy, etc. The handle of each material has its own characteristics and matching style, so it can be selected according to specific needs. The copper handle has a hard texture and a retro style, with a full European classical flavor, suitable for matching European-style cabinets; the ceramic handle is smooth, bright, tidy and silky to the touch, suitable for matching with Chinese classical style or pastoral style cabinets; stainless steel and aluminum alloy materials The handle is not easy to rust, the surface is smooth and bright, sturdy and durable, which is suitable for matching with modern cabinets; the stainless steel handle that has been processed by the process has very good corrosion resistance and scratch resistance, and is very modern; the zinc chrome alloy handle has a bright surface, Beautiful and stylish, suitable for modern and industrial styles. Although the cabinet door handle looks small, it is inseparable from its assistance and decoration in life! The handle of the cabinet door must be selected well, the more details, the better the overall quality.<br/> <a href="https://www.degolhardware.com/CK101-Brushed-Brass-Hexagon-Knobs-Pull-for-Bedroom-Cabinet-pd47763985.html">https://www.degolhardware.com/CK101-Brushed-Brass-Hexagon-Knobs-Pull-for-Bedroom-Cabinet-pd47763985.html</a></p>The lock is stuck, what should I do if I cant turn it?tag:www.onfeetnation.com,2022-03-31:6595159:BlogPost:260579192022-03-31T01:07:42.000ZDegolhttps://www.onfeetnation.com/profile/Degol
<p>1. First of all, we need to check where the damage is. First, try it with the key to see if there is a problem with the lock tongue and cannot rebound. If it can't rebound, we can try to turn the handles on both sides to see if the handle is pressed down normally. If the pressure is normal, but the lock tongue does not rebound, there is a problem with the lock body, and a new door lock needs to be replaced directly.</p>
<p>2. But if the lock tongue can rebound when the handle is twisted, it…</p>
<p>1. First of all, we need to check where the damage is. First, try it with the key to see if there is a problem with the lock tongue and cannot rebound. If it can't rebound, we can try to turn the handles on both sides to see if the handle is pressed down normally. If the pressure is normal, but the lock tongue does not rebound, there is a problem with the lock body, and a new door lock needs to be replaced directly.</p>
<p>2. But if the lock tongue can rebound when the handle is twisted, it is not a problem of the lock cylinder. It is necessary to check whether the door frame is deformed, such as the installation position of the lock body, or the deformation of the heaven and earth lock rod inside the door leaf, which needs to be debugged.<br/> <a href="https://www.degolhardware.com/LH1036-zinc-alloy-door-handle-pd41074985.html">https://www.degolhardware.com/LH1036-zinc-alloy-door-handle-pd41074985.html</a></p>How to maintain the door handle in daily use?tag:www.onfeetnation.com,2022-03-24:6595159:BlogPost:259541832022-03-24T01:25:35.000ZDegolhttps://www.onfeetnation.com/profile/Degol
<p>1. Take necessary protective measuresThe door lock expands and contracts smoothly due to thermal expansion and contraction, especially in winter, when the seasons change, the weather changes obviously, and the temperature difference between indoor and outdoor is large, so protective measures should also be taken in winter.</p>
<p>2. Clean frequentlyWhether it is the lock body or the door handle, if there are stains during use, it is necessary to prevent the door handle from corroding or deal…</p>
<p>1. Take necessary protective measuresThe door lock expands and contracts smoothly due to thermal expansion and contraction, especially in winter, when the seasons change, the weather changes obviously, and the temperature difference between indoor and outdoor is large, so protective measures should also be taken in winter.</p>
<p>2. Clean frequentlyWhether it is the lock body or the door handle, if there are stains during use, it is necessary to prevent the door handle from corroding or deal with the stains deep in the lock body in time, and clean it with neutral detergent.</p>
<p>3. Use the correct way to close the doorDoor handles often break quickly because some of my friends' houses don't use the proper way to close the door. Generally speaking, when closing the door, you should first hold the door handle, tighten the bolt to the lock body, then close the door and then loosen it, so as not to break the handle due to excessive force or the wrong direction.</p>
<p>4, pay attention to maintain lubricationIf you hear metal squeaks when opening and closing the door, put a small amount of lubricant on the door hinge. If the closing resistance is too great, you can lubricate the movable bolt with a little oil. When opening the door, the key is not fully inserted into the keyhole. In winter, first check whether the keyhole is frozen, and in other seasons, check whether there are other foreign objects in the keyhole. Door handles and locks are essential in everyday life and very important for maintenance.long handle windows cleaning flush handle sliding window window door handles sliding window flush handle door & window handles</p>
<p><a href="https://www.degolhardware.com/door-handle-pl3895104.html">https://www.degolhardware.com/door-handle-pl3895104.html</a></p>How to maintain the door handle in daily use?tag:www.onfeetnation.com,2022-03-24:6595159:BlogPost:259543042022-03-24T01:25:27.000ZDegolhttps://www.onfeetnation.com/profile/Degol
<p>1. Take necessary protective measuresThe door lock expands and contracts smoothly due to thermal expansion and contraction, especially in winter, when the seasons change, the weather changes obviously, and the temperature difference between indoor and outdoor is large, so protective measures should also be taken in winter.</p>
<p>2. Clean frequentlyWhether it is the lock body or the door handle, if there are stains during use, it is necessary to prevent the door handle from corroding or deal…</p>
<p>1. Take necessary protective measuresThe door lock expands and contracts smoothly due to thermal expansion and contraction, especially in winter, when the seasons change, the weather changes obviously, and the temperature difference between indoor and outdoor is large, so protective measures should also be taken in winter.</p>
<p>2. Clean frequentlyWhether it is the lock body or the door handle, if there are stains during use, it is necessary to prevent the door handle from corroding or deal with the stains deep in the lock body in time, and clean it with neutral detergent.</p>
<p>3. Use the correct way to close the doorDoor handles often break quickly because some of my friends' houses don't use the proper way to close the door. Generally speaking, when closing the door, you should first hold the door handle, tighten the bolt to the lock body, then close the door and then loosen it, so as not to break the handle due to excessive force or the wrong direction.</p>
<p>4, pay attention to maintain lubricationIf you hear metal squeaks when opening and closing the door, put a small amount of lubricant on the door hinge. If the closing resistance is too great, you can lubricate the movable bolt with a little oil. When opening the door, the key is not fully inserted into the keyhole. In winter, first check whether the keyhole is frozen, and in other seasons, check whether there are other foreign objects in the keyhole. Door handles and locks are essential in everyday life and very important for maintenance.long handle windows cleaning flush handle sliding window window door handles sliding window flush handle door & window handles</p>
<p><a href="https://www.degolhardware.com/door-handle-pl3895104.html">https://www.degolhardware.com/door-handle-pl3895104.html</a></p>How to maintain the door handle in daily use?tag:www.onfeetnation.com,2022-03-24:6595159:BlogPost:259542542022-03-24T01:25:18.000ZDegolhttps://www.onfeetnation.com/profile/Degol
<p>1. Take necessary protective measuresThe door lock expands and contracts smoothly due to thermal expansion and contraction, especially in winter, when the seasons change, the weather changes obviously, and the temperature difference between indoor and outdoor is large, so protective measures should also be taken in winter.</p>
<p>2. Clean frequentlyWhether it is the lock body or the door handle, if there are stains during use, it is necessary to prevent the door handle from corroding or deal…</p>
<p>1. Take necessary protective measuresThe door lock expands and contracts smoothly due to thermal expansion and contraction, especially in winter, when the seasons change, the weather changes obviously, and the temperature difference between indoor and outdoor is large, so protective measures should also be taken in winter.</p>
<p>2. Clean frequentlyWhether it is the lock body or the door handle, if there are stains during use, it is necessary to prevent the door handle from corroding or deal with the stains deep in the lock body in time, and clean it with neutral detergent.</p>
<p>3. Use the correct way to close the doorDoor handles often break quickly because some of my friends' houses don't use the proper way to close the door. Generally speaking, when closing the door, you should first hold the door handle, tighten the bolt to the lock body, then close the door and then loosen it, so as not to break the handle due to excessive force or the wrong direction.</p>
<p>4, pay attention to maintain lubricationIf you hear metal squeaks when opening and closing the door, put a small amount of lubricant on the door hinge. If the closing resistance is too great, you can lubricate the movable bolt with a little oil. When opening the door, the key is not fully inserted into the keyhole. In winter, first check whether the keyhole is frozen, and in other seasons, check whether there are other foreign objects in the keyhole. Door handles and locks are essential in everyday life and very important for maintenance.long handle windows cleaning flush handle sliding window window door handles sliding window flush handle door & window handles</p>
<p><a href="https://www.degolhardware.com/door-handle-pl3895104.html">https://www.degolhardware.com/door-handle-pl3895104.html</a></p>How to maintain the door handle in daily use?tag:www.onfeetnation.com,2022-03-23:6595159:BlogPost:259380122022-03-23T01:49:02.000ZDegolhttps://www.onfeetnation.com/profile/Degol
<p>1. Take necessary protective measuresThe door lock expands and contracts smoothly due to thermal expansion and contraction, especially in winter, when the seasons change, the weather changes obviously, and the temperature difference between indoor and outdoor is large, so protective measures should also be taken in winter.</p>
<p>2. Clean frequentlyWhether it is the lock body or the door handle, if there are stains during use, it is necessary to prevent the door handle from corroding or deal…</p>
<p>1. Take necessary protective measuresThe door lock expands and contracts smoothly due to thermal expansion and contraction, especially in winter, when the seasons change, the weather changes obviously, and the temperature difference between indoor and outdoor is large, so protective measures should also be taken in winter.</p>
<p>2. Clean frequentlyWhether it is the lock body or the door handle, if there are stains during use, it is necessary to prevent the door handle from corroding or deal with the stains deep in the lock body in time, and clean it with neutral detergent.</p>
<p>3. Use the correct way to close the doorDoor handles often break quickly because some of my friends' houses don't use the proper way to close the door. Generally speaking, when closing the door, you should first hold the door handle, tighten the bolt to the lock body, then close the door and then loosen it, so as not to break the handle due to excessive force or the wrong direction.</p>
<p>4, pay attention to maintain lubricationIf you hear metal squeaks when opening and closing the door, put a small amount of lubricant on the door hinge. If the closing resistance is too great, you can lubricate the movable bolt with a little oil. When opening the door, the key is not fully inserted into the keyhole. In winter, first check whether the keyhole is frozen, and in other seasons, check whether there are other foreign objects in the keyhole. Door handles and locks are essential in everyday life and very important for maintenance.long handle windows cleaning flush handle sliding window window door handles sliding window flush handle door & window handles<br/> <a href="https://www.degolhardware.com/LH1095-Zinc-Alloy-Door-Handle-for-Middle-East-pd40784985.html">https://www.degolhardware.com/LH1095-Zinc-Alloy-Door-Handle-for-Middle-East-pd40784985.html</a></p>How to maintain the door handle in daily use?tag:www.onfeetnation.com,2022-03-23:6595159:BlogPost:259379192022-03-23T01:48:55.000ZDegolhttps://www.onfeetnation.com/profile/Degol
<p>1. Take necessary protective measuresThe door lock expands and contracts smoothly due to thermal expansion and contraction, especially in winter, when the seasons change, the weather changes obviously, and the temperature difference between indoor and outdoor is large, so protective measures should also be taken in winter.</p>
<p>2. Clean frequentlyWhether it is the lock body or the door handle, if there are stains during use, it is necessary to prevent the door handle from corroding or deal…</p>
<p>1. Take necessary protective measuresThe door lock expands and contracts smoothly due to thermal expansion and contraction, especially in winter, when the seasons change, the weather changes obviously, and the temperature difference between indoor and outdoor is large, so protective measures should also be taken in winter.</p>
<p>2. Clean frequentlyWhether it is the lock body or the door handle, if there are stains during use, it is necessary to prevent the door handle from corroding or deal with the stains deep in the lock body in time, and clean it with neutral detergent.</p>
<p>3. Use the correct way to close the doorDoor handles often break quickly because some of my friends' houses don't use the proper way to close the door. Generally speaking, when closing the door, you should first hold the door handle, tighten the bolt to the lock body, then close the door and then loosen it, so as not to break the handle due to excessive force or the wrong direction.</p>
<p>4, pay attention to maintain lubricationIf you hear metal squeaks when opening and closing the door, put a small amount of lubricant on the door hinge. If the closing resistance is too great, you can lubricate the movable bolt with a little oil. When opening the door, the key is not fully inserted into the keyhole. In winter, first check whether the keyhole is frozen, and in other seasons, check whether there are other foreign objects in the keyhole. Door handles and locks are essential in everyday life and very important for maintenance.long handle windows cleaning flush handle sliding window window door handles sliding window flush handle door & window handles<br/> <a href="https://www.degolhardware.com/LH1095-Zinc-Alloy-Door-Handle-for-Middle-East-pd40784985.html">https://www.degolhardware.com/LH1095-Zinc-Alloy-Door-Handle-for-Middle-East-pd40784985.html</a></p>HOW TO MAINTAIN THE DOOR HANDLE IN DAILY USE?tag:www.onfeetnation.com,2022-03-21:6595159:BlogPost:259082052022-03-21T01:21:49.000ZDegolhttps://www.onfeetnation.com/profile/Degol
<p>1. Take necessary protective measuresThe door lock expands and contracts smoothly due to thermal expansion and contraction, especially in winter, when the seasons change, the weather changes obviously, and the temperature difference between indoor and outdoor is large, so protective measures should also be taken in winter.<br></br> 2. Clean frequentlyWhether it is the lock body or the door handle, if there are stains during use, it is necessary to prevent the door handle from corroding or deal…</p>
<p>1. Take necessary protective measuresThe door lock expands and contracts smoothly due to thermal expansion and contraction, especially in winter, when the seasons change, the weather changes obviously, and the temperature difference between indoor and outdoor is large, so protective measures should also be taken in winter.<br/> 2. Clean frequentlyWhether it is the lock body or the door handle, if there are stains during use, it is necessary to prevent the door handle from corroding or deal with the stains deep in the lock body in time, and clean it with neutral detergent.</p>
<p>3. Use the correct way to close the doorDoor handles often break quickly because some of my friends' houses don't use the proper way to close the door. Generally speaking, when closing the door, you should first hold the door handle, tighten the bolt to the lock body, then close the door and then loosen it, so as not to break the handle due to excessive force or the wrong direction.</p>
<p>4, pay attention to maintain lubricationIf you hear metal squeaks when opening and closing the door, put a small amount of lubricant on the door hinge. If the closing resistance is too great, you can lubricate the movable bolt with a little oil. When opening the door, the key is not fully inserted into the keyhole. In winter, first check whether the keyhole is frozen, and in other seasons, check whether there are other foreign objects in the keyhole. Door handles and locks are essential in everyday life and very important for maintenance.</p>
<p>long handle windows cleaning flush handle sliding window window door handles sliding window flush handle door & window handles</p>
<p><a href="https://www.degolhardware.com/LH1040-Zinc-Alloy-door-handle-pd40707985.html">https://www.degolhardware.com/LH1040-Zinc-Alloy-door-handle-pd40707985.html</a></p>How to Install a door handle?tag:www.onfeetnation.com,2022-03-17:6595159:BlogPost:258647002022-03-17T01:22:54.000ZDegolhttps://www.onfeetnation.com/profile/Degol
<p>Tools/Materials:<br></br> Pencils, screwdrivers, hammers, rulers, electric drills, door locks, dust plates, screws, 1" (2.5cm) chisels, hole saw bits<br></br> 1. Position and hold the latch on the hole of the door. When you line up, you should be able to see the hole through the latch plate.<br></br> 2. Use a pencil to wrap around the shape of the board on the door.<br></br>
3. Remove the latch plate and use a hammer and chisel to remove the wood in the marked area. Make sure it's as deep as the thickness…</p>
<p>Tools/Materials:<br/> Pencils, screwdrivers, hammers, rulers, electric drills, door locks, dust plates, screws, 1" (2.5cm) chisels, hole saw bits<br/> 1. Position and hold the latch on the hole of the door. When you line up, you should be able to see the hole through the latch plate.<br/>
2. Use a pencil to wrap around the shape of the board on the door.<br/>
3. Remove the latch plate and use a hammer and chisel to remove the wood in the marked area. Make sure it's as deep as the thickness of the latch plate. Once done, the board should be flush with the edge of the door.<br/>
4. Use the drill bit to drill holes, the door will place the door handle. Go all the way to the other side of the door.<br/>
5. Reposition the latch plate and mark the two screw holes with a pencil. Drill the smart hole and insert the latch, then screw in the latch plate.<br/>
6. The handle has two halves, usually connected together with two long screws. Insert the door handles into the sides of the door, making sure to line up the screw holes and center locking mechanism latches, which should fit the door handles on the inside.<br/>
7. Finally, install the door panel on the door frame. Lock the door on the door and lock it. Use a pencil to trace the striker board and chisel out the wood on the door frame. Use a drill to make a hole in the middle where the latch goes in. Screw in the striker plate, then open and close the door to check that everything is in order.<br/>
door handle lock glass door handle smart door handle door lock handle door handle marble handle door</p>
<p><a href="https://www.degolhardware.com/LH1036-zinc-alloy-door-handle-pd41074985.html">https://www.degolhardware.com/LH1036-zinc-alloy-door-handle-pd41074985.html</a></p>How to Install a door handle?tag:www.onfeetnation.com,2022-03-17:6595159:BlogPost:258649332022-03-17T01:22:48.000ZDegolhttps://www.onfeetnation.com/profile/Degol
<p>Tools/Materials:<br></br> Pencils, screwdrivers, hammers, rulers, electric drills, door locks, dust plates, screws, 1" (2.5cm) chisels, hole saw bits<br></br> 1. Position and hold the latch on the hole of the door. When you line up, you should be able to see the hole through the latch plate.<br></br> 2. Use a pencil to wrap around the shape of the board on the door.<br></br>
3. Remove the latch plate and use a hammer and chisel to remove the wood in the marked area. Make sure it's as deep as the thickness…</p>
<p>Tools/Materials:<br/> Pencils, screwdrivers, hammers, rulers, electric drills, door locks, dust plates, screws, 1" (2.5cm) chisels, hole saw bits<br/> 1. Position and hold the latch on the hole of the door. When you line up, you should be able to see the hole through the latch plate.<br/>
2. Use a pencil to wrap around the shape of the board on the door.<br/>
3. Remove the latch plate and use a hammer and chisel to remove the wood in the marked area. Make sure it's as deep as the thickness of the latch plate. Once done, the board should be flush with the edge of the door.<br/>
4. Use the drill bit to drill holes, the door will place the door handle. Go all the way to the other side of the door.<br/>
5. Reposition the latch plate and mark the two screw holes with a pencil. Drill the smart hole and insert the latch, then screw in the latch plate.<br/>
6. The handle has two halves, usually connected together with two long screws. Insert the door handles into the sides of the door, making sure to line up the screw holes and center locking mechanism latches, which should fit the door handles on the inside.<br/>
7. Finally, install the door panel on the door frame. Lock the door on the door and lock it. Use a pencil to trace the striker board and chisel out the wood on the door frame. Use a drill to make a hole in the middle where the latch goes in. Screw in the striker plate, then open and close the door to check that everything is in order.<br/>
door handle lock glass door handle smart door handle door lock handle door handle marble handle door</p>
<p><a href="https://www.degolhardware.com/LH1036-zinc-alloy-door-handle-pd41074985.html">https://www.degolhardware.com/LH1036-zinc-alloy-door-handle-pd41074985.html</a></p>How to Install a door handle?tag:www.onfeetnation.com,2022-03-17:6595159:BlogPost:258648552022-03-17T01:22:43.000ZDegolhttps://www.onfeetnation.com/profile/Degol
<p>Tools/Materials:<br></br> Pencils, screwdrivers, hammers, rulers, electric drills, door locks, dust plates, screws, 1" (2.5cm) chisels, hole saw bits<br></br> 1. Position and hold the latch on the hole of the door. When you line up, you should be able to see the hole through the latch plate.<br></br> 2. Use a pencil to wrap around the shape of the board on the door.<br></br>
3. Remove the latch plate and use a hammer and chisel to remove the wood in the marked area. Make sure it's as deep as the thickness…</p>
<p>Tools/Materials:<br/> Pencils, screwdrivers, hammers, rulers, electric drills, door locks, dust plates, screws, 1" (2.5cm) chisels, hole saw bits<br/> 1. Position and hold the latch on the hole of the door. When you line up, you should be able to see the hole through the latch plate.<br/>
2. Use a pencil to wrap around the shape of the board on the door.<br/>
3. Remove the latch plate and use a hammer and chisel to remove the wood in the marked area. Make sure it's as deep as the thickness of the latch plate. Once done, the board should be flush with the edge of the door.<br/>
4. Use the drill bit to drill holes, the door will place the door handle. Go all the way to the other side of the door.<br/>
5. Reposition the latch plate and mark the two screw holes with a pencil. Drill the smart hole and insert the latch, then screw in the latch plate.<br/>
6. The handle has two halves, usually connected together with two long screws. Insert the door handles into the sides of the door, making sure to line up the screw holes and center locking mechanism latches, which should fit the door handles on the inside.<br/>
7. Finally, install the door panel on the door frame. Lock the door on the door and lock it. Use a pencil to trace the striker board and chisel out the wood on the door frame. Use a drill to make a hole in the middle where the latch goes in. Screw in the striker plate, then open and close the door to check that everything is in order.<br/>
door handle lock glass door handle smart door handle door lock handle door handle marble handle door</p>
<p><a href="https://www.degolhardware.com/LH1036-zinc-alloy-door-handle-pd41074985.html">https://www.degolhardware.com/LH1036-zinc-alloy-door-handle-pd41074985.html</a></p>How to Install a door handle?tag:www.onfeetnation.com,2022-03-15:6595159:BlogPost:258394012022-03-15T01:32:42.000ZDegolhttps://www.onfeetnation.com/profile/Degol
<p>Tools/Materials:</p>
<p>Pencils, screwdrivers, hammers, rulers, electric drills, door locks, dust plates, screws, 1" (2.5cm) chisels, hole saw bits</p>
<p>1. Position and hold the latch on the hole of the door. When you line up, you should be able to see the hole through the latch plate.</p>
<p>2. Use a pencil to wrap around the shape of the board on the door.</p>
<p>3. Remove the latch plate and use a hammer and chisel to remove the wood in the marked area. Make sure it's as deep as the…</p>
<p>Tools/Materials:</p>
<p>Pencils, screwdrivers, hammers, rulers, electric drills, door locks, dust plates, screws, 1" (2.5cm) chisels, hole saw bits</p>
<p>1. Position and hold the latch on the hole of the door. When you line up, you should be able to see the hole through the latch plate.</p>
<p>2. Use a pencil to wrap around the shape of the board on the door.</p>
<p>3. Remove the latch plate and use a hammer and chisel to remove the wood in the marked area. Make sure it's as deep as the thickness of the latch plate. Once done, the board should be flush with the edge of the door.</p>
<p>4. Use the drill bit to drill holes, the door will place the door handle. Go all the way to the other side of the door.</p>
<p>5. Reposition the latch plate and mark the two screw holes with a pencil. Drill the smart hole and insert the latch, then screw in the latch plate.</p>
<p>6. The handle has two halves, usually connected together with two long screws. Insert the door handles into the sides of the door, making sure to line up the screw holes and center locking mechanism latches, which should fit the door handles on the inside.</p>
<p>7. Finally, install the door panel on the door frame. Lock the door on the door and lock it. Use a pencil to trace the striker board and chisel out the wood on the door frame. Use a drill to make a hole in the middle where the latch goes in. Screw in the striker plate, then open and close the door to check that everything is in order.</p>
<p>door handle lock glass door handle smart door handle door lock handle door handle marble handle door</p>
<p><a href="https://www.degolhardware.com/door-handle-pl3895104.html">https://www.degolhardware.com/door-handle-pl3895104.html</a></p>How to Install a door handle?tag:www.onfeetnation.com,2022-03-14:6595159:BlogPost:258249762022-03-14T01:45:37.000ZDegolhttps://www.onfeetnation.com/profile/Degol
<p>Tools/Materials:</p>
<p>Pencils, screwdrivers, hammers, rulers, electric drills, door locks, dust plates, screws, 1" (2.5cm) chisels, hole saw bits</p>
<p>1. Position and hold the latch on the hole of the door. When you line up, you should be able to see the hole through the latch plate.</p>
<p>2. Use a pencil to wrap around the shape of the board on the door.</p>
<p>3. Remove the latch plate and use a hammer and chisel to remove the wood in the marked area. Make sure it's as deep as the…</p>
<p>Tools/Materials:</p>
<p>Pencils, screwdrivers, hammers, rulers, electric drills, door locks, dust plates, screws, 1" (2.5cm) chisels, hole saw bits</p>
<p>1. Position and hold the latch on the hole of the door. When you line up, you should be able to see the hole through the latch plate.</p>
<p>2. Use a pencil to wrap around the shape of the board on the door.</p>
<p>3. Remove the latch plate and use a hammer and chisel to remove the wood in the marked area. Make sure it's as deep as the thickness of the latch plate. Once done, the board should be flush with the edge of the door.</p>
<p>4. Use the drill bit to drill holes, the door will place the door handle. Go all the way to the other side of the door.</p>
<p>5. Reposition the latch plate and mark the two screw holes with a pencil. Drill the smart hole and insert the latch, then screw in the latch plate.</p>
<p>6. The handle has two halves, usually connected together with two long screws. Insert the door handles into the sides of the door, making sure to line up the screw holes and center locking mechanism latches, which should fit the door handles on the inside.</p>
<p>7. Finally, install the door panel on the door frame. Lock the door on the door and lock it. Use a pencil to trace the striker board and chisel out the wood on the door frame. Use a drill to make a hole in the middle where the latch goes in. Screw in the striker plate, then open and close the door to check that everything is in order.</p>
<p>door handle lock glass door handle smart door handle door lock handle door handle marble handle door<br/> <a href="https://www.degolhardware.com/LH1036-zinc-alloy-door-handle-pd41074985.html">https://www.degolhardware.com/LH1036-zinc-alloy-door-handle-pd41074985.html</a></p>WHAT KIND OF FLOOR DRAIN MATERIAL TO CHOOSE?tag:www.onfeetnation.com,2022-03-11:6595159:BlogPost:257959092022-03-11T01:52:19.000ZDegolhttps://www.onfeetnation.com/profile/Degol
<p>1. PVC floor drain The price of PVC floor drains is relatively low, and the effect is also good. But it also has the disadvantage that the material is brittle and easy to age. This kind of floor drain was used by my family in the past, it is really not durable, and it will be replaced in a short time. And its compression resistance and wear resistance are not very good. It doesn't look good and looks a bit cheap. <br></br> 2. Stainless steel floor drain Compared with the PVC floor drain, the…</p>
<p>1. PVC floor drain The price of PVC floor drains is relatively low, and the effect is also good. But it also has the disadvantage that the material is brittle and easy to age. This kind of floor drain was used by my family in the past, it is really not durable, and it will be replaced in a short time. And its compression resistance and wear resistance are not very good. It doesn't look good and looks a bit cheap. <br/> 2. Stainless steel floor drain Compared with the PVC floor drain, the appearance is also better. Because the material is stainless steel, the service life is relatively long. Generally, stainless steel is divided into 202 and 304. It is recommended to choose 304. Although the price is slightly more expensive, it has strong corrosion resistance and can be used for a longer time. <br/> 3. Full copper chrome floor drain: The current market share is the most. It has a thick coating and is easy to clean even if patina has been used for a long time. In the case of good quality, it can be used for at least six years. Although the price is high, but the cost performance is also very high, it is a good choice. <br/>
4. Aluminum alloy, zinc alloy floor drain: Aluminum alloy floor drains are cheap and light in weight. But it is rough in workmanship, looks unsightly, and is relatively cheap. At the same time, it has poor corrosion resistance and short service life. Zinc alloys are cheap and, likewise, have a short lifespan. <br/>
5. Ceramic floor drain: Ceramic floor drains are relatively rare, but they are excellent in all aspects, do not rust, and have a good deodorant effect. The editor has been using it for more than ten years and it has not broken. And it looks great with the tiles. However, the price is more expensive, and friends who have conditions can try to change it. <br/>
floor drain floor drain stainless steel floor drain mondeway rope door stop balcony floor drain <br/>
<a href="https://www.degolhardware.com/High-Quality-Kitchen-Brass-Floor-Drain-Cover-pd49817985.html">https://www.degolhardware.com/High-Quality-Kitchen-Brass-Floor-Drain-Cover-pd49817985.html</a></p>WHAT KIND OF FLOOR DRAIN MATERIAL TO CHOOSE?tag:www.onfeetnation.com,2022-03-11:6595159:BlogPost:257959082022-03-11T01:52:16.000ZDegolhttps://www.onfeetnation.com/profile/Degol
<p>1. PVC floor drain The price of PVC floor drains is relatively low, and the effect is also good. But it also has the disadvantage that the material is brittle and easy to age. This kind of floor drain was used by my family in the past, it is really not durable, and it will be replaced in a short time. And its compression resistance and wear resistance are not very good. It doesn't look good and looks a bit cheap. <br></br> 2. Stainless steel floor drain Compared with the PVC floor drain, the…</p>
<p>1. PVC floor drain The price of PVC floor drains is relatively low, and the effect is also good. But it also has the disadvantage that the material is brittle and easy to age. This kind of floor drain was used by my family in the past, it is really not durable, and it will be replaced in a short time. And its compression resistance and wear resistance are not very good. It doesn't look good and looks a bit cheap. <br/> 2. Stainless steel floor drain Compared with the PVC floor drain, the appearance is also better. Because the material is stainless steel, the service life is relatively long. Generally, stainless steel is divided into 202 and 304. It is recommended to choose 304. Although the price is slightly more expensive, it has strong corrosion resistance and can be used for a longer time. <br/> 3. Full copper chrome floor drain: The current market share is the most. It has a thick coating and is easy to clean even if patina has been used for a long time. In the case of good quality, it can be used for at least six years. Although the price is high, but the cost performance is also very high, it is a good choice. <br/>
4. Aluminum alloy, zinc alloy floor drain: Aluminum alloy floor drains are cheap and light in weight. But it is rough in workmanship, looks unsightly, and is relatively cheap. At the same time, it has poor corrosion resistance and short service life. Zinc alloys are cheap and, likewise, have a short lifespan. <br/>
5. Ceramic floor drain: Ceramic floor drains are relatively rare, but they are excellent in all aspects, do not rust, and have a good deodorant effect. The editor has been using it for more than ten years and it has not broken. And it looks great with the tiles. However, the price is more expensive, and friends who have conditions can try to change it. <br/>
floor drain floor drain stainless steel floor drain mondeway rope door stop balcony floor drain <br/>
<a href="https://www.degolhardware.com/High-Quality-Kitchen-Brass-Floor-Drain-Cover-pd49817985.html">https://www.degolhardware.com/High-Quality-Kitchen-Brass-Floor-Drain-Cover-pd49817985.html</a></p>WHAT KIND OF FLOOR DRAIN MATERIAL TO CHOOSE?tag:www.onfeetnation.com,2022-03-09:6595159:BlogPost:257698532022-03-09T01:20:29.000ZDegolhttps://www.onfeetnation.com/profile/Degol
<p>1. PVC floor drain</p>
<p>The price of PVC floor drains is relatively low, and the effect is also good. But it also has the disadvantage that the material is brittle and easy to age. This kind of floor drain was used by my family in the past, it is really not durable, and it will be replaced in a short time. And its compression resistance and wear resistance are not very good. It doesn't look good and looks a bit cheap.</p>
<p>2. Stainless steel floor drain</p>
<p>Compared with the PVC floor…</p>
<p>1. PVC floor drain</p>
<p>The price of PVC floor drains is relatively low, and the effect is also good. But it also has the disadvantage that the material is brittle and easy to age. This kind of floor drain was used by my family in the past, it is really not durable, and it will be replaced in a short time. And its compression resistance and wear resistance are not very good. It doesn't look good and looks a bit cheap.</p>
<p>2. Stainless steel floor drain</p>
<p>Compared with the PVC floor drain, the appearance is also better. Because the material is stainless steel, the service life is relatively long. Generally, stainless steel is divided into 202 and 304. It is recommended to choose 304. Although the price is slightly more expensive, it has strong corrosion resistance and can be used for a longer time.</p>
<p>3. Full copper chrome floor drain:</p>
<p>The current market share is the most. It has a thick coating and is easy to clean even if patina has been used for a long time. In the case of good quality, it can be used for at least six years. Although the price is high, but the cost performance is also very high, it is a good choice.</p>
<p>4. Aluminum alloy, zinc alloy floor drain:</p>
<p>Aluminum alloy floor drains are cheap and light in weight. But it is rough in workmanship, looks unsightly, and is relatively cheap. At the same time, it has poor corrosion resistance and short service life. Zinc alloys are cheap and, likewise, have a short lifespan.</p>
<p>5. Ceramic floor drain:</p>
<p>Ceramic floor drains are relatively rare, but they are excellent in all aspects, do not rust, and have a good deodorant effect. The editor has been using it for more than ten years and it has not broken. And it looks great with the tiles. However, the price is more expensive, and friends who have conditions can try to change it.</p>
<p>floor drain floor drain stainless steel floor drain mondeway rope door stop balcony floor drain<br/> <a href="https://www.degolhardware.com/floor-drainer-pl3416063.html">https://www.degolhardware.com/floor-drainer-pl3416063.html</a></p>How are the hinges adiusted?tag:www.onfeetnation.com,2022-02-22:6595159:BlogPost:255810012022-02-22T01:56:40.000ZDegolhttps://www.onfeetnation.com/profile/Degol
<p>1. If you need to adjust the slow-down speed, then you can adjust it through the nut holes at the upper and lower ends of the hinge hinge. Generally, use the hexagon socket head screw to rotate, turn left or right, respectively, corresponding to the adjustment of the hinge. The hydraulic pressure and the slow-down speed of the page, one is fast and the other is slow.</p>
<p>2. If you want to adjust the distance of the hinge, then you can adjust the screws on the left and right sides of the…</p>
<p>1. If you need to adjust the slow-down speed, then you can adjust it through the nut holes at the upper and lower ends of the hinge hinge. Generally, use the hexagon socket head screw to rotate, turn left or right, respectively, corresponding to the adjustment of the hinge. The hydraulic pressure and the slow-down speed of the page, one is fast and the other is slow.</p>
<p>2. If you want to adjust the distance of the hinge, then you can adjust the screws on the left and right sides of the hinge hinge, usually 4 screws, you can first adjust the screws of the cabinet door, and then consider adjusting the cabinet part. 4 screws. In this way, the distance between the parts connected in the middle can be adjusted. Tightening the hinge screws shortens the middle distance, and loosening the screws widens the middle distance.</p>
<p>hinges door cabinet door hinges soft close door hinge pivot hinges door pivot hinge for wooden door soft close door hinge</p>
<p><a href="https://www.degolhardware.com/DH1205-China-Factory-SUS-304-Satin-Chrome-Door-Flat-Hinge-Swing-Clear-Door-Hinges-pd42477383.html">https://www.degolhardware.com/DH1205-China-Factory-SUS-304-Satin-Chrome-Door-Flat-Hinge-Swing-Clear-Door-Hinges-pd42477383.html</a></p>How are the hinges adiusted?tag:www.onfeetnation.com,2022-02-22:6595159:BlogPost:255807782022-02-22T01:56:33.000ZDegolhttps://www.onfeetnation.com/profile/Degol
<p>1. If you need to adjust the slow-down speed, then you can adjust it through the nut holes at the upper and lower ends of the hinge hinge. Generally, use the hexagon socket head screw to rotate, turn left or right, respectively, corresponding to the adjustment of the hinge. The hydraulic pressure and the slow-down speed of the page, one is fast and the other is slow.</p>
<p>2. If you want to adjust the distance of the hinge, then you can adjust the screws on the left and right sides of the…</p>
<p>1. If you need to adjust the slow-down speed, then you can adjust it through the nut holes at the upper and lower ends of the hinge hinge. Generally, use the hexagon socket head screw to rotate, turn left or right, respectively, corresponding to the adjustment of the hinge. The hydraulic pressure and the slow-down speed of the page, one is fast and the other is slow.</p>
<p>2. If you want to adjust the distance of the hinge, then you can adjust the screws on the left and right sides of the hinge hinge, usually 4 screws, you can first adjust the screws of the cabinet door, and then consider adjusting the cabinet part. 4 screws. In this way, the distance between the parts connected in the middle can be adjusted. Tightening the hinge screws shortens the middle distance, and loosening the screws widens the middle distance.</p>
<p>hinges door cabinet door hinges soft close door hinge pivot hinges door pivot hinge for wooden door soft close door hinge</p>
<p><a href="https://www.degolhardware.com/DH1205-China-Factory-SUS-304-Satin-Chrome-Door-Flat-Hinge-Swing-Clear-Door-Hinges-pd42477383.html">https://www.degolhardware.com/DH1205-China-Factory-SUS-304-Satin-Chrome-Door-Flat-Hinge-Swing-Clear-Door-Hinges-pd42477383.html</a></p>How are the hinges adiusted?tag:www.onfeetnation.com,2022-02-19:6595159:BlogPost:255485352022-02-19T01:13:14.000ZDegolhttps://www.onfeetnation.com/profile/Degol
<p>1. If you need to adjust the slow-down speed, then you can adjust it through the nut holes at the upper and lower ends of the hinge hinge. Generally, use the hexagon socket head screw to rotate, turn left or right, respectively, corresponding to the adjustment of the hinge. The hydraulic pressure and the slow-down speed of the page, one is fast and the other is slow.</p>
<p>2. If you want to adjust the distance of the hinge, then you can adjust the screws on the left and right sides of the…</p>
<p>1. If you need to adjust the slow-down speed, then you can adjust it through the nut holes at the upper and lower ends of the hinge hinge. Generally, use the hexagon socket head screw to rotate, turn left or right, respectively, corresponding to the adjustment of the hinge. The hydraulic pressure and the slow-down speed of the page, one is fast and the other is slow.</p>
<p>2. If you want to adjust the distance of the hinge, then you can adjust the screws on the left and right sides of the hinge hinge, usually 4 screws, you can first adjust the screws of the cabinet door, and then consider adjusting the cabinet part. 4 screws. In this way, the distance between the parts connected in the middle can be adjusted. Tightening the hinge screws shortens the middle distance, and loosening the screws widens the middle distance.</p>
<p>hinges door cabinet door hinges soft close door hinge pivot hinges door pivot hinge for wooden door soft close door hinge<br/> <a href="https://www.degolhardware.com/DH1032-Iron-Black-Surface-Butt-Hinge-in-Door-Window-Hinges-pd42658985.html">https://www.degolhardware.com/DH1032-Iron-Black-Surface-Butt-Hinge-in-Door-Window-Hinges-pd42658985.html</a></p>How are the hinges adiusted?tag:www.onfeetnation.com,2022-02-18:6595159:BlogPost:255356452022-02-18T02:02:42.000ZDegolhttps://www.onfeetnation.com/profile/Degol
<p>1. If you need to adjust the slow-down speed, then you can adjust it through the nut holes at the upper and lower ends of the hinge hinge. Generally, use the hexagon socket head screw to rotate, turn left or right, respectively, corresponding to the adjustment of the hinge. The hydraulic pressure and the slow-down speed of the page, one is fast and the other is slow.</p>
<p>2. If you want to adjust the distance of the hinge, then you can adjust the screws on the left and right sides of the…</p>
<p>1. If you need to adjust the slow-down speed, then you can adjust it through the nut holes at the upper and lower ends of the hinge hinge. Generally, use the hexagon socket head screw to rotate, turn left or right, respectively, corresponding to the adjustment of the hinge. The hydraulic pressure and the slow-down speed of the page, one is fast and the other is slow.</p>
<p>2. If you want to adjust the distance of the hinge, then you can adjust the screws on the left and right sides of the hinge hinge, usually 4 screws, you can first adjust the screws of the cabinet door, and then consider adjusting the cabinet part. 4 screws. In this way, the distance between the parts connected in the middle can be adjusted. Tightening the hinge screws shortens the middle distance, and loosening the screws widens the middle distance.</p>
<p>hinges door cabinet door hinges soft close door hinge pivot hinges door pivot hinge for wooden door soft close door hinge<br/> <a href="https://www.degolhardware.com/DH1202-Satin-Brass-iron-single-mortise-spring-door-hinge-adjustable-self-closing-hinges-pd48741494.html">https://www.degolhardware.com/DH1202-Satin-Brass-iron-single-mortise-spring-door-hinge-adjustable-self-closing-hinges-pd48741494.html</a></p>Wardrobe cabinet door handle installation heighttag:www.onfeetnation.com,2022-02-15:6595159:BlogPost:254918142022-02-15T02:04:50.000ZDegolhttps://www.onfeetnation.com/profile/Degol
<p>1. The installation height of the hanging kitchen cabinet is relatively high, and the height of the handle should be the height of the handle, which should not exceed the height of the woman's palm, or between 1 and 2 inches above the bottom of the cabinet door. <br></br> 2. The height of the desktop kitchen cabinet: it is suitable to be placed on the upper part of the cabinet door, preferably the next inch above the door. The cabinet door can be easily opened without bending over. <br></br> 3.…</p>
<p>1. The installation height of the hanging kitchen cabinet is relatively high, and the height of the handle should be the height of the handle, which should not exceed the height of the woman's palm, or between 1 and 2 inches above the bottom of the cabinet door. <br/> 2. The height of the desktop kitchen cabinet: it is suitable to be placed on the upper part of the cabinet door, preferably the next inch above the door. The cabinet door can be easily opened without bending over. <br/> 3. Handle installation direction Generally, cabinet door handles are installed horizontally and are not suitable for vertical installation. <br/>
4. General handle installation position The standard upper handle is installed at the lower corner of the door, but the lower handle is just the opposite and should be installed at the upper corner of the door. cabinet handle Kitchen Cabinet Handle cabinet handles furniture kitchen pantry cabinet with handles Brass Cabinet Handles gold cabinet handle <a href="https://www.degolhardware.com/LH1201-Modern-Contemporary-Slim-Matte-Black-Dummy-Door-Handle-Lever-for-Home-Hallway-or-Closet-Passage-pd49198794.html">https://www.degolhardware.com/LH1201-Modern-Contemporary-Slim-Matte-Black-Dummy-Door-Handle-Lever-for-Home-Hallway-or-Closet-Passage-pd49198794.html</a></p>Wardrobe cabinet door handle installation heighttag:www.onfeetnation.com,2022-02-12:6595159:BlogPost:254519982022-02-12T01:25:12.000ZDegolhttps://www.onfeetnation.com/profile/Degol
<p>1. The installation height of the hanging kitchen cabinet is relatively high, and the height of the handle should be the height of the handle, which should not exceed the height of the woman's palm, or between 1 and 2 inches above the bottom of the cabinet door.</p>
<p>2. The height of the desktop kitchen cabinet: it is suitable to be placed on the upper part of the cabinet door, preferably the next inch above the door. The cabinet door can be easily opened without bending over.</p>
<p>3.…</p>
<p>1. The installation height of the hanging kitchen cabinet is relatively high, and the height of the handle should be the height of the handle, which should not exceed the height of the woman's palm, or between 1 and 2 inches above the bottom of the cabinet door.</p>
<p>2. The height of the desktop kitchen cabinet: it is suitable to be placed on the upper part of the cabinet door, preferably the next inch above the door. The cabinet door can be easily opened without bending over.</p>
<p>3. Handle installation direction Generally, cabinet door handles are installed horizontally and are not suitable for vertical installation.</p>
<p>4. General handle installation position The standard upper handle is installed at the lower corner of the door, but the lower handle is just the opposite and should be installed at the upper corner of the door.</p>
<p>cabinet handle Kitchen Cabinet Handle cabinet handles furniture kitchen pantry cabinet with handles Brass Cabinet Handles gold cabinet handle<br/> <a href="https://www.degolhardware.com/LH1043-Factory-High-Quality-Zinc-Alloy-Door-Handle-pd47624985.html">https://www.degolhardware.com/LH1043-Factory-High-Quality-Zinc-Alloy-Door-Handle-pd47624985.html</a></p>HOW TO INSTALL DOOR HANDLE?tag:www.onfeetnation.com,2022-02-08:6595159:BlogPost:253909502022-02-08T01:09:50.000ZDegolhttps://www.onfeetnation.com/profile/Degol
<p>1. Open the door, so that not only the inner but also the outer door handle can be operated at the same time. Locate the 2 screws on the inside door handle cover, these screws together hold the inside and outside door handles.<br></br> 2. Use a Phillips screwdriver to turn the two screws counterclockwise, and pull the inner door handle away from the door and pull the outer door handle away from the door.<br></br> 3. Use a Phillips head screwdriver to remove 2 screws from the outer edge of the fixed…</p>
<p>1. Open the door, so that not only the inner but also the outer door handle can be operated at the same time. Locate the 2 screws on the inside door handle cover, these screws together hold the inside and outside door handles.<br/> 2. Use a Phillips screwdriver to turn the two screws counterclockwise, and pull the inner door handle away from the door and pull the outer door handle away from the door.<br/> 3. Use a Phillips head screwdriver to remove 2 screws from the outer edge of the fixed latch door.<br/>
4. Insert the inner door handle of the door, use 2 fixing screws from the inner side of the door, follow the hole on the cover plate, turn the screw line clockwise to the outer door pull glove, tighten the screw, and finally tighten it with a Phillips screwdriver. 5. Around the curved side of the door frame on the inside of the door frame, fix the impact plate and the screws that come with the kit. door handle door handle lock black door handle sinterior doors handles interior doors handles barn door handle<br/>
<a href="https://www.degolhardware.com/LH1036-zinc-alloy-door-handle-pd41074985.html">https://www.degolhardware.com/LH1036-zinc-alloy-door-handle-pd41074985.html</a></p>