Welcome to
On Feet Nation
Christopher Online
Raymond Online
jack452 Online
Maxine Online
Safety First Training Ltd. Online
Posted by Raymond on April 25, 2024 at 11:52am 0 Comments 0 Likes
Posted by ramy on April 25, 2024 at 11:49am 0 Comments 0 Likes
Posted by Agnes on April 25, 2024 at 11:46am 0 Comments 0 Likes
Plastic parts are everywhere, and injection molding is the most widely used manufacturing process for making them.
It’s easy to see why: in addition to its material versatility, injection molding is a highly cost-effective process for manufacturing in large quantities, with a single mold sometimes used over a million times with no visible loss of quality. For mass production of plastic parts, there are few better alternatives.
So what exactly is injection molding? How does it…
ContinueAdded by Madhavachar Rangnekadr on April 7, 2020 at 7:23am — No Comments
What is injection molding?
Injection molding is a manufacturing process commonly used for fabricating items from plastic trinkets and toys to automotive body parts, cell phone cases, water bottles, and containers. Essentially many of the plastic parts that we use in every-day life are injection molded. It is a quick process to create a mass…
Added by Madhavachar Rangnekadr on April 7, 2020 at 5:58am — No Comments
The prototype is a model, a test piece, but it can only be produced in small batches. If you really produce in large quantities, you still have to use a mold, but the mold is more expensive to make. If you make the mold without confirming the usability of the product in all aspects, if anything goes wrong, it’s a big loss.
All customers who are looking for prototype should know, do the prototype to need 3D CAD file, so why do the…
ContinueAdded by Madhavachar Rangnekadr on April 3, 2020 at 1:26pm — No Comments
In order to ensure the normal processing of plastic parts, operators need to understand the cause of the abnormal appearance in this process, the better to avoid the abnormal appearance during processing. Below, JasonMould share the causes of deformation in processing:
Added by Madhavachar Rangnekadr on March 29, 2020 at 6:11am — No Comments
According to the causes of bubbles, the solutions are as follows:
1) When the wall thickness of the product is large, the cooling speed of the outer surface is faster than that of the center part. Therefore, with the cooling process, the resin in the center part shrinks and expands to the surface, resulting in insufficient filling in the center part. This is called a vacuum bubble. The solutions are as follows:
a) According to the wall thickness, determine the reasonable gate…
ContinueAdded by Madhavachar Rangnekadr on February 4, 2020 at 5:00am — No Comments
Over the last few years, it has been seen that additive manufacturing has grown exponentially, as each piece manufactured by rapid prototyping service has a large commercial field due to the versatility offered by its applications.
ContinueAdded by Madhavachar Rangnekadr on January 29, 2020 at 6:33am — 1 Comment
Fast prototyping is the procedure of rapidly making physical parts to use for testing the look, fit, as well as usefulness of a plan. Conventional assembling procedures can take weeks or months to set up, also a large number of dollars. That is the reason fast prototyping is so significant. It spares time, yet cash too, by and large.…
ContinueAdded by Madhavachar Rangnekadr on January 15, 2020 at 12:18am — No Comments
Injection molding is a processing method used in mass production of complex parts. Specific principle refers to: heat melting plastic raw materials by injection molding machine screw into the mold cavity, after cooling and curing, plastic forming products.
The plastic mold consists of two parts: moving mold and fixed mold. The moving mold is installed on the moving template of the injection molding machine, and the fixed mold is installed on the fixed template of the injection molding…
ContinueAdded by Madhavachar Rangnekadr on January 2, 2020 at 6:05am — No Comments
Injection molding is a processing method used in mass production of complex parts. Specific principle refers to: heat melting plastic raw materials by injection molding machine screw into the mold cavity, after cooling and curing, plastic forming products.
The plastic mold consists of two parts: moving mold and fixed mold. The moving mold is installed on the moving template of the injection molding machine, and the fixed mold is installed on the fixed template of the…
ContinueAdded by Madhavachar Rangnekadr on January 2, 2020 at 5:30am — No Comments
What is a black spot? Black spot refers to the black spots or stripes on the molded products.
Causes of black spots on injection molded parts:
1. Resin decomposition
As plastic is a chemical, it will decompose gradually when it is heated above the melting point. The higher the temperature, the longer the time and the faster the decomposition. In addition, there are some areas in the barrel that are easy to retain resin, such as check check valve and thread.…
ContinueAdded by Madhavachar Rangnekadr on December 13, 2019 at 2:41am — No Comments
Start Prototyping is professional Rapid Prototyping Service,Quick Prototype Manufacturing,Additive Manufacturing and Low Volume Manufacturing Service factory from china.
Today we will talking about the basic knowledge of …
ContinueAdded by Madhavachar Rangnekadr on December 7, 2019 at 6:37am — No Comments
This rapid prototyping service and additive manufacturing is the most successful and reputed businesses depended on the innovation. Sometimes it is tough to follow the innovative process due to some required optimum care and crucial consideration. When it comes to the designs and printings of prototype…
ContinueAdded by Madhavachar Rangnekadr on November 25, 2019 at 6:11am — No Comments
In modern society, automobile has become an important means of transportation for people to travel. Its quality not only affects people’s travel quality, but also directly affects people’s life and property safety. Generally, the service life of automobile mould is 600000 to 800000 times. In the process of automobile mold design and production, we should not only meet the technological requirements of automobile body parts, but also pay attention to the application of mechanical equipment,…
ContinueAdded by Madhavachar Rangnekadr on November 25, 2019 at 12:34am — No Comments
Injection molding process is not static, logical, because of the different products, different materials, different injection molding machine and material preparation and so on the different conditions, injection molding process will produce many uncertain factors, so as the injection molding processing workers, according to specific conditions to the corresponding process optimization adjustment is the highest embodiment of injection molding processing technology. Therefore, the…
ContinueAdded by Madhavachar Rangnekadr on November 8, 2019 at 6:16am — No Comments
Fast prototyping is the procedure of rapidly making physical parts to use for testing the look, fit, as well as usefulness of a plan. Conventional assembling procedures can take weeks or months to set up, also a large number of dollars. That is the reason fast prototyping is so significant. It spares time, yet cash too, by and large.…
ContinueAdded by Madhavachar Rangnekadr on November 7, 2019 at 1:00am — No Comments
Rigid, flexible, durable or tear away, plastic bags are a major part of the daily operations of many industrial and commercial outfits. Bags are practical and efficient for storage of parts, components and materials as they provide a safe and consistent barrier against moisture and other environmental contaminants.
ContinueAdded by Madhavachar Rangnekadr on October 24, 2019 at 6:35am — No Comments
This rapid prototyping service and additive manufacturing is the most successful and reputed businesses depended on the innovation. Sometimes it is tough to follow the innovative process due to some required optimum care and crucial consideration. When it comes to the designs and printings of prototype…
ContinueAdded by Madhavachar Rangnekadr on September 5, 2019 at 4:42am — No Comments
New model Coming !
JianSen hardware have upgrade the previous vinyl fence gate latch and now this latch more stable and easy for using .
We have invest a large amount to open the mould for this product line for vinyl fence gate hardware and vinyl fence gate accessories.
ContinueAdded by Madhavachar Rangnekadr on August 28, 2019 at 12:54am — No Comments
New model Coming !
JianSen hardware have upgrade the previous vinyl fence gate latch and now this latch more stable and easy for using .
We have invest a large amount to open the mould for this product line for vinyl fence gate hardware and vinyl fence gate accessories.
ContinueAdded by Madhavachar Rangnekadr on August 28, 2019 at 12:35am — No Comments
Titanium is an important structural metal developed in the 1950s. Titanium alloys are widely used in various fields due to their high strength, good corrosion resistance and high heat resistance. Many countries in the world have recognized the importance of titanium alloy materials, which have been researched and developed successively and have been put into practical use.
The first practical titanium alloy was…
Added by Madhavachar Rangnekadr on July 24, 2019 at 2:17am — No Comments
© 2024 Created by PH the vintage. Powered by