Aryan Kumar's Blog (156)

Rising Use of Aluminium as Aerosol Packaging Material

Aerosols can be defined as tiny solid particles or tiny liquid droplets, in the atmosphere. The solid aerosol particles can be placed in atmosphere, more specifically by volcanic eruptions, dust storms, and emission of soot particles by large fires.

Liquid aerosols hold water contents, which may also include chemical species. The wave action in the ocean may cause water droplets and small sea salt particles into atmosphere.

In more simpler terms, aerosol is a substance… Continue

Added by Aryan Kumar on December 30, 2022 at 1:42am — No Comments

Global Green Chemicals Industry Will Hit $22,039 Million by 2030

The green chemicals market is growing, and it is projected to rise at the rate of 8.9% in the near future, to hit $22,039 million by 2030. The major reasons behind the growth of this industry are the increasing acceptance of biobased packaging and increasing concerns pertaining to the exhaustion of fossil fuels.

The bioalcohols category held the largest share in terms of both… Continue

Added by Aryan Kumar on December 15, 2022 at 7:39am — No Comments

How Does Tight Building Envelopes Impact AAC Consumption?

The autoclaved aerated concrete is made of cement, fine aggregates, and an expansion agent that rises up the fresh mixture in bread dough. Such concrete contains 80% air. The material is molded and cut into tiny measured units, in the factory.

Cured panels or blocks of autoclaved aerated concrete are connected with thin bed mortar. Its components can be utilized in… Continue

Added by Aryan Kumar on November 10, 2022 at 5:04am — No Comments

Global Agricultural Adjuvants Industry Analysis, Leading Players and Forecast Report, 2030

The global population is rapidly rising, hence the demand for massive crop production. Due to increasing population, and growing housing requirements with public infrastructure, the agricultural land is consistently reducing.

Thus, farmers to increasingly pressured to improve their yield production. They are required to invest in both advanced technologies and agricultural productivity to remain competitive and profitable.

Adjuvants can be defined as an auxiliary, used for… Continue

Added by Aryan Kumar on November 4, 2022 at 4:01am — No Comments

Global Benzalkonium Chloride Industry Share, Leading Players and Forecast Report, 2030

The National Investment Promotion and Facilitation Agency of India states that the pharmaceutical industry of India received foreign direct investment (FDI) of $17.990 billion from April 2020 to March 2021. Further, the government of Canada invested over $1 billion to facilitate industrial research and innovations in pharmaceuticals and vaccines and expand biomanufacturing capacity. The surging investments being made in the pharmaceutical sector will, therefore, create a huge requirement for… Continue

Added by Aryan Kumar on November 2, 2022 at 5:51am — No Comments

Automotive Adhesives and Sealants Industry Analysis and Growth Forecast to 2030

The automotive adhesives and sealants are widely used in smaller to large-sized devices, such as sensors, and vehicle chassis. Numerous high-performing cars are produced with lightweight composite materials to keep the weight minimal. The composite materials, coupled with the mechanical fasteners facilitate welding and keep the weight lighter.

Structural adhesives are highly preferred by professionals as they can create a bond and join different types of materials. The structural… Continue

Added by Aryan Kumar on October 27, 2022 at 8:27am — No Comments

Rising Demand for Water Treatment Boosts Microfiltration Membrane Industry

The microfiltration membrane market is projected to experience growth in the coming years, ascribed to the rising demand for microfiltration technologies such as industrial wastewater treatment, expansion of the pharmaceutical industry, and increase in the industrial application of this technology in the food & beverage sector.

The microfiltration membranes are expected… Continue

Added by Aryan Kumar on October 12, 2022 at 4:55am — No Comments

Coding and Marking Systems Industry Analysis, Leading Players and Future Scope

Coding and marking systems existed in various industries for over a long period, it includes food and beverages, pharmaceuticals, cosmetics, and others. These systems are crucial for product traceability, along with this, they ensure products are compliant with industry standards and deemed safe.

The coding and marking systems industry is projected to generate revenue worth $7,469.6 million by 2030. There are numerous other benefits of… Continue

Added by Aryan Kumar on October 11, 2022 at 5:17am — No Comments

Why Does Automotives Use OEM Coating for Interior?

A coating is a layer that is applied to a substrate to provide color and glossiness while also shielding it from the outside environment. The coating also offers protection from rust, UV rays, and temperature changes. Demand for automobile coatings is driven by properties including scratch resistance, substrate compatibility, and environmental friendliness. Manufacturers of new…


Added by Aryan Kumar on October 3, 2022 at 6:16am — No Comments

Tobacco Packaging Market Analysis, Leading Players and Forecast Report 2030

You might have seen television advertisements, hoardings, and a warning displayed on tobacco products that consumption of tobacco is injurious to health. It is not unusual to see people consuming tobacco despite the display of warnings. The increase in tobacco consumption results in surging demand for tobacco packaging. The packaging of tobacco products usually cigarettes include a… Continue

Added by Aryan Kumar on September 30, 2022 at 6:32am — No Comments

Booming Automotive Industry Driving Specialty Chemicals Industry Growth

The global specialty chemicals market value reached $639,935.8 million in 2019, and it is expected to surge to $980,423.7 million by 2030. Furthermore, the market will demonstrate a CAGR of 5.5% from 2020 to 2030, as per the estimates of the market research company, P&S Intelligence. The market is being propelled by the mushrooming requirement for these chemicals in the automobile,… Continue

Added by Aryan Kumar on May 12, 2022 at 4:59am — No Comments

Rising Shift Toward Renewable Energy Propelling Virtual Power Plant Creation Worldwide

According to the International Energy Outlook 2019 published by the U.S. Energy Information Administration (EIA), renewable energy sources will generate 49% of global electricity by 2050. In the coming years, the expanding capacity of renewable power plants will augment the need for centralized infrastructure to facilitate the continuous flow of electricity. This will, therefore, accelerate the development of virtual power plants (VPPs) to integrate the newly installed renewable energy power… Continue

Added by Aryan Kumar on May 3, 2022 at 1:39am — No Comments

Hot Melt Adhesives Market Insights, Key Players, Growth and Forecast Report, 2030

The Reserve Bank of India states that the per capita gross national income and per capita net national income (NNI) surged from INR 1,41,439 crore in the financial year (FY) 2018–2019 to INR 1,50,025 crore in FY 2019–2020 and INR 1,26,521 crore in FY 2018–2019 to INR 1,34,226 crore in FY 2019–2020, respectively in India. Further, the Census and Economic Information Center (CEIC) estimates that the per capita national income of Indonesia increased from IDR 38,325,249.839 in 2017 to IDR… Continue

Added by Aryan Kumar on April 22, 2022 at 2:02am — No Comments

Pour Point Depressants Being Used to Improve Oil Viscosity

The flourishing automotive industry is one of the major factors propelling the demand for pour point depressants all around the globe. This is mainly ascribed to the fact that pour point depres-sants are widely required for the production of lubricants used in vehicles. In addition to this, the surging automotive production in several nations such as India, Indonesia, Thailand, and Brazil is predicted to further boost the sales of pour point depressants across the world.

There have… Continue

Added by Aryan Kumar on April 21, 2022 at 5:16am — No Comments

Automakers Using Titanium Dioxide In Lightweight Vehicle Production

Due to the large-scale use of industrial and architectural coatings, on account of the soaring investments being made in the construction of apartments, retail centers, civic infrastructure, and hotels, and the growing need for protecting equipment and machinery from corrosion and rusting in industries, the global titanium dioxide market is predicted to exhibit a CAGR of 4.5% from 2020 to 2030 and reach a… Continue

Added by Aryan Kumar on April 20, 2022 at 2:55am — No Comments

Global Spunbond Nonwovens Market Insights, Leading Players and Future Analysis

Commonly known as spun laid, spunbond nonwoven fabric is produced by the continuous process of fibres spun and can be directed with air streams or can be dispersed directly to a web-like deflector. Spunbond is free of lubricants and it is a non-toxic material. As the spunbond nonwoven fabric is very durable in nature and has beneficial traits, such as high strength and resistance to bacteria, it is being increasingly used in the textile industry.

Additionally, with the soaring sales… Continue

Added by Aryan Kumar on April 14, 2022 at 8:26am — 1 Comment

Booming Demand for Food & Beverage Packaging Fueling Packaging Adhesive Sales

The surge in the food and beverage industry, on account of the growing sales of foods and beverages, is positively impacting the worldwide demand for packaging adhesives. This is primarily because of the mushrooming need for maintaining the freshness and shelf-life of packaged food products, owing to the ballooning public awareness of health and wellness. As per All4Pack… Continue

Added by Aryan Kumar on April 8, 2022 at 6:00am — No Comments

Generator Set Market in India Set for Lucrative Growth in Coming Years

The 'Make in India' campaign of the Government of India aims to facilitate investments, enhance skill development, protect intellectual property, foster innovation, and create world-class manufacturing infrastructure across the country. Further, the Department for Promotion of Industry and Internal Trade (DPIIT) states that the cumulative foreign direct investment (FDI) in the manufacturing subsectors stood at $ 100.35 billion between April 2000 and June 2021. The strengthening manufacturing…


Added by Aryan Kumar on March 24, 2022 at 9:17am — No Comments

Expanding Construction Sector Fueling Silane Market Growth

With the surging requirement for paints and coatings, on account of the increasing construction and infrastructure development activities, the demand for silane is rising sharply across the globe. This is because silane is being increasing used in paints, owing to its ability to provide excellent adhesion and high resistance to chemicals and ultraviolet (UV) radiation. The improving standard of living of people and mushrooming population are fueling the need for better civic infrastructure,…


Added by Aryan Kumar on March 16, 2022 at 7:32am — No Comments

Production of Bio-Methionine Rising due to Surging Environmental Concerns

Methionine is one of the nine essential amino acids required by the human body as it aids in tissue repair and growth. It is a sulfur-containing amino acid that strengthens the nails and improves the pliability and tone of the hair and skin. The sulfur provided by it also slows cell aging and protects cells from pollutants. Additionally, sulfur is essential for the bio-availability and absorption of zinc and selenium. Furthermore, methionine acts as a lipotropic agent, preventing excess fat…


Added by Aryan Kumar on March 11, 2022 at 7:01am — No Comments

© 2023   Created by PH the vintage.   Powered by

Badges  |  Report an Issue  |  Terms of Service