Members

A Complete Wi-Fi Setup Guide to Canon PIXMA MG 3650

Some of the access points (usually named routers or hubs) have an automatic connection button labeled “WPS,” which is for a Wi-Fi network connectivity protected setup and will allow your devices to connect to a network without needing to type in a password. It is the easiest method to connect a PIXMA printer. If the access point has a WPS connection button, please choose ‘WPS Connection Method’ given below for the detailed instructions on connecting using this method. If there is no WPS connection button on the access point, you can use other optional methods to connect your Canon PIXMA MG 3650 printer to a Wi-Fi network.


Canon PIXMA MG 3650: WPS Connection Method
Before starting this process, there are a few conditions that must be completed to use the WPS push button method for your Canon PIXMA MG 3650 printer:

Your access point must have a physical WPS push button; please refer to your device’s customer guide.
For more details on which security method is being used on your wireless network connection, please check the wireless connection settings on the computer. Your network must have WPA (Wi-Fi Protected Access) or WPA2 security protocols. If the WEP (Wired Equivalent Privacy) security is used, or if no security is enabled, most WPS-enabled access points will not connect using the WPS connection method.
Follow these step-by-step instructions below to complete your Canon PIXMA MG 3650 Wi-Fi network setup.

Step 1: Firstly, ensure your printer is on and that the WPS connection button on the wireless router can be pressed if needed.

Step 2: Now, click on and hold the [Wi-Fi] network button (A) on your printer until the on lamp (B) flashes.

Step 3: Then, click on the [Black] button (C) and the [Wi-Fi] network button (A); ensure the Wi-Fi lamp (D) flashes quickly and that the ON lamp is lit, as shown in the illustration given below. Now, go to the access point and click on the [WPS] connection button within 2 minutes.

Step 4: After that, your printer’s blue Wi-Fi network lamp will remain while searching, and both the Power and Wi-Fi network lamps will flash when connected to your access point. When your printer has successfully connected to the wireless network, the Power and Wi-Fi network lamps will stop flashing and light up.

Step 5: Lastly, ensure that your Wi-Fi network lamp and ON lamp are lit.

Please check your access point manual menu for precise details by clicking the WPS connection button.

Canon PIXMA MG 3650: Verify Network Settings
Always make sure that your Canon PIXMA MG 3650 printer is successfully connected to a wireless network connection; you can print out your printer’s network settings:

Firstly, ensure your printer is on.
Then, take two sheets of A4 size or letter-size plain paper.
After that, click on and hold the [Wi-Fi] network button until the Power lamp flashes once, and then you can remove it.
Lastly, click on the [Wi-Fi] network button, and the network information page will be printed.
When you take the printout, make sure to check that “connection” shows “active,” and the SSID – Service Set Identifier (name of your wireless network) shows the right name of your wireless network on the Canon PIXMA MG 3650 printer.

Canon PIXMA MG 3650: Standard Connection Method For Windows Computer Users
If the access point doesn’t support the physical WPS connection button, then follow these instructions to set up the Canon PIXMA MG 3650 printer on the wireless network connection. For Windows computer users, insert the disc with your Canon PIXMA MG 3650 printer. If you don’t have the CD that came with the Canon PIXMA MG 3650 printer, you should download the software.

Step 1: Firstly, press on [Start Setup] when your initial screen appears.

Step 2: The software checks to see any updates to the drivers and software and download them. This takes a few minutes.

Step 3: Now, choose your region and country, then press on [Next].

Step 4: If you accept the terms and conditions of the license agreement, press on [Yes].

Step 5: Press on [Agree] if you wish to participate in the Extended Survey Program. Otherwise, press on [Doesn’t Agree].

Step 6: After that, to allow every Install Wizard process, press on [Next].

Step 7: Now, choose [Wireless LAN Connection], press on [Next].

Step 8: Then, choose [Connect through a wireless router (recommended)], and press on [Next].

Step 9: Always ensure your printer is on; press [Next].

Step 10: The software search for any printers already set up on your network.

Detection takes some time, so please be patient when searching for the software’s printer.

Step 11: If you’ve already connected the printer to a network, choose it from the list in the “Printers on Network List” window and press on [Next] to start the software installation, then proceed to step 17. If it’s the first time you’re setting up the printer, it’ll not be displayed in the list, so please continue step 12.

Step 12: Always ensure “Settings printer not found in the list” is selected, then press on [Next].

Step 13: The following screen will appear briefly.

Step 14: The setup guide instructs you about connecting your printer to the network using the “connection through cableless setup” process. Please carefully follow the on-screen guidelines to prepare the printer for connection. Press on Next only when the printer matches the example displayed in the charts below.

Step 15: Now, wait until the setup detects your printer. The network on your computer is temporarily disabled during this time.

Step 16: Press on [Next] once the setup is done.

Step 17: MP Driver & Network Tool will be downloaded and installed. After that, wait while your software is installed.

Step 18: Again, wait for the setup to finish.

Step 19: If you are installing your printer for the first time, Print Head Alignment is recommended after your installation is done, press on [Next]. Please check the User Guide for more information.

Step 20: Now, to do a Test Print to confirm your installation, press on [Execute] or [Next].

Step 21: The setup is now finished; press on [Next] to complete your software installation.

Step 22: Then, choose the software you want to install from the list, then press [Next]. If you are unsure what software you want to install, don’t worry because you can always uninstall it later.

Step 23: To register your printer, press on [Next] (it will open in a web browser). Otherwise, press on [Skip].

Step 24: Lastly, press on [Exit] to end the installation.

So, these are the detailed step-by-step instructions to set up the Canon PIXMA MG 3650 printer to a Wi-Fi network by using the WPS Connection Method and Standard Connection Method.

Visit Site – Ij.start.canon
ij.start.canon setup


Source :- https://setupijprinter.com/a-complete-wi-fi-setup-guide-to-canon-pi...

Views: 1

Comment

You need to be a member of On Feet Nation to add comments!

Join On Feet Nation

© 2022   Created by PH the vintage.   Powered by

Badges  |  Report an Issue  |  Terms of Service