Check The Main Bearing Hydraulic Station

To check the oil quantity and cleanliness, the oil quantity and cleanliness can be checked through the oil flow indicator, the observation hole on the hollow journal bush cover, the oil level indicator in the fuel tank, etc.

In addition, if the parking time is long in winter, the three-way cock at the water inlet of the main bearing can be turned to the waterproof position, and the siphon action can be used to discharge the accumulated water in the spherical tile through the water channel, so as to avoid freezing and cracking of the spherical tile or the bearing seat.

The daily cleaning of the ultrafine vertical mill is mainly to prevent the ultrafine vertical mill from corroding, rusting, or even causing blockage and wear due to impurities, which in turn affects the daily production of the ultrafine vertical mill.

Defects within the scope of self-study should be dealt with in a timely manner, and problems outside the scope of self-study should be reported in a timely manner.

Views: 5


You need to be a member of On Feet Nation to add comments!

Join On Feet Nation

© 2022   Created by PH the vintage.   Powered by

Badges  |  Report an Issue  |  Terms of Service