Electric welding machine cable

Electric welding machine cable is commonly known as welding handle wire, which is a special cable used for connecting the secondary side of electric welding machine and connecting electric welding pliers and electric welding machine.To get more news about rifeng cable, you can visit rfcable official website.

Electric welding machine cables are divided into many types according to different use occasions, but most of them are single-core, the conductor material is oxygen-free copper, and the copper wire has a small diameter and a large number of wires.

YH cable is the most common type of electric welding machine cable, and its characteristics are: large current and low voltage. The following uses Rifeng YH cable as an example to introduce the use characteristics of electric welding machine cables.

1. Brief introduction of YH welding machine cable

YH, the full name is rubber sheathed flexible cable for mobile electric welding machine, also known as welding handle wire. Y stands for mobile. H stands for electric welding machine.

2. Use characteristics of YH electric welding machine cable

The cable structure of YH electric welding machine is a single-core cable made of multiple strands of flexible conductor, and the conductor is made of high-purity oxygen-free copper. The copper core has bright appearance, low resistivity, good conductivity and high safety.

YH cable works under low voltage (maximum voltage is 200V) and high current conditions, so it has a certain degree of resistance.The motor lead wire cables are frequently moved, twisted and cast, requiring softness and good bending performance.

It is easy to be scratched and rubbed by sharp steel components during deployment, so the cable insulation is required to have good mechanical properties such as tear resistance and abrasion resistance.

The use of complex environmental conditions, such as sunlight, water boiling, contact with muddy water, machine oil, acid and alkali liquids, etc., requires a certain degree of weather resistance, oil resistance, and solvent resistance.

Sometimes hot welding parts are encountered, requiring good heat deformation resistance.Frequent movement requires small outer diameter and light weight.For more details about rifeng cable please click here to access the webpage.

Views: 33

Comment

You need to be a member of On Feet Nation to add comments!

Join On Feet Nation

© 2024   Created by PH the vintage.   Powered by

Badges  |  Report an Issue  |  Terms of Service