Hinges, an often-overlooked component of the hardware department that keeps your lock in place, come in a range of sizes and shapes.
The best panel hinges for your projects are determined by where they'll be installed and the final look you want to achieve.
• Butt Hinge
The butt hinge is the most frequent form of the door hinge. The two petals are mortised into the frame and door, permitting them to butt up against each other. Butt hinges come in three varieties: simple, ball bearing, and spring-loaded.
For lightweight interiors, builders typically employ basic panel door hinges. At the hinge's knuckles, a pin, which may or may not be detachable, connects the two leaves.
• Ball Bearing Hinge
To alleviate friction generated by heavy doors, the ball bearing hinge has greased bearings between both the hinge's knuckles. These tough hinges are perfect for hefty entryways or gates that get a lot of use.
• Spring-Loaded Butt Hinge
Use a spring-loaded butt hinge to ensure that a door closes behind you. These hinges, which are commonly used in screen doors, can be calibrated to close or open with varying degrees of pressure.
• Rising Butt Hinge
To reach a thick-pile carpet or threshold, a rising butt hinge elevates the door 12 inches. While closed, it resembles a standard hinge.
• Barrel Hinge
The barrel hinge is ideal for tiny, specialized woodworking tasks like a box or cabinet. This little hinge is perfect for situations where the hinge needs to be hidden. Merely drill holes the proper size to fit the barrels and install the hinge to complete the installation. Barrels' hinges are often made of brass and are not intended for load-bearing purposes.
• Concealed Hinge
Hidden panel hinges are designed to blend in with the beauty of beautiful furniture and cabinets. They can be self-closing and modified with the help of a couple of bolts. Bigger hidden hinges for doors are also available. They offer protection that normal hinges do not because they are not exposed and thus tamper-proof.
• Knife (Pivot) Hinge
Knife hinges can be found in cabinets. They're also known as scissors hinges because of their resemblance to a pair of scissors blades that are joined at a pivot. One hinge leaf is mortised into the bottom of the cabinet door, while the other is mortised into the cabinet. The pivot is the only part of the system that is visible once it is mounted.
• Overlay Hinge
Some hinges contribute to the cabinetry's thickness. Try using an overlay hinge to reduce the thickness. This hinge folds up on itself to enable the door to rest flush against the cabinet's front.
• Offset Hinge
His unique hinge lets you to swing the gate away from the frame, allowing you to extend the entrance by two inches. Offset hinges are extremely beneficial for making ADA-compliant rooms.
• Piano Hinge
The lid hinge on a piano is called after this long, uninterrupted hinge. This hinge is held together by a long rod that runs through the knuckles of the two long leaves. Toy boxes, fold-down desks, and storage benches all benefit from this hinge.
Strap hinges can be found on the exterior of the gate. To give a rustic impression inside, architects use smaller replicas of them on cupboards. For massive doors or farm doors, the lengthy hinge leaves (or straps) provide additional support.

Final words:
So, this was all about different types of hinges and where to use them. You can determine panel door hinges and other types just by looking at them. This helps you decide which one to use in your next project