Whether buying a new house or fixing your old one, the dampness of walls and water seepage are common problems most home and building owners face. Here are a few measures which can be taken to water leakage solution in Delhi.
Common Types of Dampness
Penetrating Dampness: The major causes after penetrating dampness are one or multiple leaking drain pipes or hoses, a damaged water pipe or running water. The water plants run over and seep through the pores into the structure. Although such a problem can be easily remedied by fixing the water source, waterproofing chemicals are vital for keeping this problem at bay.
Rising Dampness: When collected moisture increases from the ground up through pores due to capillary movement, we contact this rising dampness sensation. Rising damp creates problems in the lower region of the walls and causes efflorescence and peeling of the paint.
Condensation: The moisture in the air can be taken care of by installing new ventilation systems and improving home insulation and heating processes by best waterproofing company.
Most of the time, these problems may occur due to poor quality of construction and lack of waterproofing chemicals used during the construction of the building. Lack of waterproofing construction chemical suppliers can cause dampness of the walls, efflorescence and the peeling of paint.
Thus, the dampness of walls must be tackled and resolved promptly. However, there is a certain lack of awareness about which waterproofing chemicals and processes must be used to either solve these problems or avoid them altogether.
Treating Mild Dampness of Interior Walls
In mild damp patches, homeowners may use the subsequent process to minister the patches and get back to painting the walls.
• Use an iron stick to extract open patches in and around the damp area and clear patches of loose plaster, if any.
• If the plaster has been released, homeowners may involve a coating of waterproofing chemicals, such as Zorrocrete 008W mixed with cement on the surface. Nevertheless, once accomplished, the homeowner also has the option to re-plaster the patches using mortar made of cement, sand and Zorro proof 007 L - allowing the plaster to cure and dry out.
Interior walls: Treating Severe Dampness
Extreme cases of dampness in walls are primarily described by peeling plaster, observable damp patches and white chalky sediments. For the homeowner to attack this problem of wall crack repair products India from walls, the plaster will have to be completely removed to apply to waterproof, beginning with the brick level.
1. Take an iron stick and remove the damaged plaster on the walls until the brick level, then clear 2 feet wider than the damp patch.
2. Apply a strong waterproof coating agent, such as Zorrocrete 2K 011 directly onto the bricks.
3. Finally, apply the plaster on the exposed patch using mortar using cement, sand and an integral waterproofing chemical such as Zorroproof 007 L.
4. Whitewash the affected area after the base has been prepared.
Parallel to the methods applied to fix damp walls, a few processes can be used to fix walls with seepage nuisances, as mentioned below.
https://www.cicogroup.com/
https://www.cicogroup.com/what-do-we-do/
https://www.cicogroup.com/what-do-we-have-in-the-works/
https://www.cicogroup.com/who-have-we-worked-with/