API Line Pipe produced by API 5l pipe suppliers in India is a steel pipe used to transport oil, gas, and petroleum distillates. Line pipes are used to construct pipelines and are distinct from casing and tubing.

API 5L pipes are manufactured by several pipe mills worldwide for the oil and gas sector. API Spec 5L is an international standard which sets specifications for the fabrication of seamless and welded steel pipes in two product specification levels (PSL 1 and PSL 2). You can look for top-rated X42 pipe suppliers.

Specifications for ASTM A53 Steel Pipe

ASTM A53 is basically a carbon steel alloy that can be utilized in structural applications and low-pressure pipelines. Carbon steel pipe ASTM A53 steel pipe is a specification that covers seamless and welded black and hot-dipped galvanized steel pipe. A 53 is designed for high-pressure and mechanical applications, although it can also be used in everyday steam, water, gas, and airlines.

• A53 Pipe is available in three grades (F, E, and S) and three types (F, E, and S) (A, B).
• An electric resistance weld is used in the A53 Type E. (Grades A and B)
• A53 Type S is an entirely seamless pipe.
• A53 Type F is made with a butt weld in the furnace or a continuous weld (Grade A only).

Specifications for API 5L X52 Pipe

API 5L X52 pipes include 0.16 percent carbon, 0.45 percent silicon, 1.65 percent manganese, 0.02 percent phosphorus, 0.01 percent sulphur, 0.07 percent vanadium, 0.05 percent niobium, and 0.04 percent titanium in their chemical composition. This alloy's API 5L X52 dsaw pipe has exceptional mechanical qualities. The tensile strength of API 5L X52 s355 is very high. API 5L grade x52 carbon steel pipe has a minimum yield strength of 52 KSI. You can choose among top-rated X42 pipe suppliers for high-quality products.

In India, API 5L X42 PSL2 Seamless Pipe and Grade X42 PSL1 ERW Material are available in various forms.

Carbon steel line pipes, both welded and seamless, are covered by the API 5L X42 specification. This material can be hot-rolled or cold-drawn into pipes. The P11 Pipe produced by P11 pipe suppliers can normally be found in sizes up to 24 inches in diameter.

The API 5L X42 Pipe, often known as L290 Pipe, has a yield strength of 290 MPa. The X42 Pipe is mostly used for oil and gas transmission. PSL1 and PSL2 are the two different API 5L Grade X42 Pipe levels. There are some distinctions between the two tiers. Grade X42 PSL1 Pipe Line is available in sizes ranging from 0.405" to 80". You can look for P22 pipe suppliers as per the requirements.

Manufacturer of ST52 Pipes in India

The ST52 Pipe suppliers produce S-designated tubes or pipes intended for construction or structural applications. Welding is typically required for pipes make use in structural applications. The ST 52.3 DIN 17100 Honed Tube can be welded to similar or completely different material.