As we all know, accidents happen. Unfortunately, sometimes those accidents happen to our beloved computers or laptops. Most commonly, laptops will have something dropped on them that will break the laptop screen. In other cases, the laptop itself is dropped only to be picked up with a fractured screen. The damage is done and is irreversible.pool enclosure parts It's time to consider options: to repair it myself or to use a professional shop. This guide is for the brave computer technicians who are not afraid to work with small parts, fragile plastics and laptop screen panels. Warning! Attempting this laptop repair may void your manufacturer warranty.

A laptop screen is repaired by replacing the current screen with a new one. To do this, you will need to first remove the bezel (plastic frame surrounding the screen). Then you will need to unscrew the metal brackets holding the screen in place. Following that, you will need to unscrew the screen from the brackets. Then you will be able to identify the laptop screen model number and serial information. With that information in hand, you will be able to order a replacement screen online. Once it arrives, unplug the inverter cable from the inverter and unplug the data cable (flex cable) that goes from the laptop to the screen.

With the old screen removed, put the new screen in to place. Do not yet remove any plastic film that is protecting the new screen in case the problem is not solved by the transplant. Plug both wires into the new laptop screen and power up the machine. If the display is properly showing, you are good to go. Remove the plastic film over the screen and begin screwing the laptop screen into the brackets on each side. Once the screen is held in place by the brackets, screw the brackets into the back cover of the laptop. Finally, replace the bezel and any screws that hold it in place.

The laptop screen repair procedure is slightly different from laptop to laptop. Some laptops use a screwless bezel that is held in place by plastic clips. These bezels need to be carefully removed so as to not break off the plastic latches. Once they are broken off, the bezel will not hold in place properly. Older laptops tend to have bezels with many screws (4 to 8) hidden under small round screw covers. You will need to remove the covers and then the screws before peeling off the bezel.

Views: 2


You need to be a member of On Feet Nation to add comments!

Join On Feet Nation

© 2024   Created by PH the vintage.   Powered by

Badges  |  Report an Issue  |  Terms of Service