Welcome to
On Feet Nation
Christopher Online
Linda Online
Layne Online
PEG-12 Dimethicone Manufacturer introduces key strategies and specific measures for waterproofing agents if the waterproofing effect is not good
1. Before the waterproof production and processing, the production and processing cloth should be washed with sufficient water.
2. Choose a waterproofing agent suitable for the production and processing of fibers, and try to avoid constantly replenishing the newly prepared working fluid in time during the production and processing. Strengthen the temperature supervision of production and processing fabrics, and the drying temperature should not exceed 130 ℃ to prevent previous cross-linking. Prevent the dried hot cloth from entering the studio immediately. Understand the adaptability of the waterproofing agent, and reasonably prepare the working fluid according to the preparation sequence. The prepared working fluid needs to be used within 24 hours.
3. The drying and baking temperature should be uniform, and the baking temperature should not be too low, usually around 150°C.
The above content is organized and shared by 1,3,5,7-Tetramethylcyclotetrasiloxane Manufacturer, hoping to help those in need.
https://www.silways.com
© 2024 Created by PH the vintage. Powered by
You need to be a member of On Feet Nation to add comments!
Join On Feet Nation