If you are planning to replace windows in your home manually, you better be ready for a hectic laboring task. Clearly doing it yourself looks like a simple task, but there are so many things that you will need to recognize and do! At start, and most importantly, you have to correctly check your existing windows as well as openings, select the best type of material type for your climate and home, select the best place to buy and then you can go for the installation of Bay window in Mornington Peninsula. Installation is a difficult job and will need different tools to do it yourself.

On the other hand, a lot of home owners will select to go with a window replacement in Mornington peninsula company, these are expert in selecting the best material for your home and changing the windows with good-quality installation. But that does not mean your work is over, still you will need to take complete care of different things earlier than the Timber window Mornington Peninsula replacement company come to change your windows.

Contractors of window replacement generally give you a complete list of things to do to ready before they come thus your home is all set for the job. It can be done with a negligible amount of time. Here are some things they can expect you to do.

Remove Blinds and Curtains

Clearly, it will be easy for Window installer in Mornington Peninsula to work on your windows in case you have all blinds and curtains removed before the process of installation. It will even keep secure your blinds and curtains from any possible harm. Usually, you can leave the curtain rods in position, as they aren’t much of an intrusion. With blinds, you would need to take away them as they delay with direct access for the elimination of your old windows and new window placement. It provides space to the contractor needed to work and keeps your curtains and blinds secure from getting damaged or dirty.

Inform Your Alarm Company

In case you use alarm company’s services, confirm to see if they installed any sensors close to your windows. As per on the service scope of the alarm company they can be able to turn off the sensors remotely, if that is not feasible, you will need to fix a meeting for a person to come over and take off the sensors. You may have them installed again when the installation is done. If you let the contractor to replace and remove any sensors, confirm that the contractor gives you with a written assurance to cover any problems that can arise after the installation process is done.

Give Space

You should confirm that there is sufficient space around your windows for the professionals of window replacement to complete their install in an easy manner. Move any couches, sofas or tables close to the windows and make sufficient space to place required tools and other needed things.