If you want to make sure that your SPC flooring maintenance is in the best condition possible, it is important to make sure that you follow the correct maintenance procedures. This will keep your flooring in pristine condition for years to come.

Avoid excessive mopping
Excessive mopping can damage your SPC flooring. It weakens the adhesive bonds and the plank structure, which can lead to warping or bubbling. To avoid this problem, be sure to use an appropriate cleaning method.

The type of cleaner you use can greatly impact the life of your SPC flooring. It should not contain strong chemicals or multi-surface cleaners. Also, it should be non-abrasive.

For deep cleaning, use a rinse-free cleaner. It should be diluted with warm water to avoid leaving an unsightly film. The solution should also be neutral pH.

To clean your SPC floor, you can use a regular broom, a vacuum, or a brushless vacuum. However, do not use a steam cleaner. It can cause damage to the coating of the plank and it is not covered by warranty.

Avoid abrasive scrubbing tools
One of the biggest reasons to invest in SPC flooring is its durable nature. The latest generation of vinyl flooring is waterproof, easy to clean, and is resistant to stains and moisture. It also comes with a warranty of 15 years.

In order to keep your SPC floor looking as new as possible, it is important to follow a few simple steps. This includes taking off shoes and using a soft mop or vacuum. This way, dust and dirt won't be tracked in on your shoes. You should also be mindful of any liquid spills on your floor. While the scrubbing process should be limited to mild detergents and a bit of water, you should still get rid of spills quickly.

There are also other ways to improve the look of your floor. This includes using non-fading protectors to prevent dents from forming. Another effective method is to polish your floors to maintain the shine.

Avoid ammonia and bleach
Ammonia and bleach are two common household cleaners. But when used together, they can create toxic chloramine gas. These fumes must be avoided when working with SPC flooring.

Ammonia is a colourless, pungent gas. It is often found in paints and urine. If it is inhaled, it can cause pneumonia. Therefore, it is best to store ammonia away from children and pregnant women.

When cleaning SPC vinyl floors, use a mild floor cleaner that contains a neutral detergent. This will help to maintain a clean and glossy surface. Also, it is important to avoid using abrasive scrubbing tools to remove dirt. Instead, a soft broom or brushless vacuum can be used.

SPC flooring can be cleaned by sweeping or mopping with a regular broom. However, you must avoid using hot steam to do this. The excessive heat from steam can damage the coating of the floor planks and weaken adhesive bonds.

Avoid direct sunlight
Direct sunlight and heat are among the factors that can damage SPC flooring. They can cause thermal expansion, fading, and warping of the floor plank. Moreover, they can also weaken the adhesive bonds and make the planks bend or bubbling.

Luckily, there are many ways to keep SPC flooring in good condition. Regular cleaning is one of the best methods. It will help you extend the lifespan of your floor.

You can also avoid direct sunlight by installing curtains or blinds on your windows. This will prevent fading from UV rays. Lastly, you can protect your floors from the heat with rugs and mats.

You can clean your SPC floors using a regular broom or a brushless vacuum. For deeper cleaning, a wet mop will do the trick.

Repair scratches and cracks
If you're looking for a way to repair scratches and cracks in SPC flooring, you're in luck. The good news is that SPC is easy to maintain and can last for many years.

The first thing to do is to clean the area where the damage has occurred. It is a good idea to do this at least once a week. This will remove loose dirt and dust that can cause stains and streaks on your SPC vinyl floor.

For minor scratches, you may want to use apple cider vinegar and olive oil. For medium to deep scratches, you can use putty or wax. However, you will need to apply a new coat of finish.

You can also use an epoxy sealer to add extra protection to your SPC flooring. If you choose to use an epoxy sealer, you will need to apply it within 24 hours.

Views: 2


You need to be a member of On Feet Nation to add comments!

Join On Feet Nation

© 2023   Created by PH the vintage.   Powered by

Badges  |  Report an Issue  |  Terms of Service