With the HP Envy 4520 printer, you can print, copy, and scan documents. It has a 100-sheet input tray and can print in both Duplex and Borderless modes simultaneously. It prints black at a speed of 9.5 pages per minute and color at a pace of 6.8 pages per minute in black.

With this printer, you can print at a resolution of 4800 x 1200 dots per inch (dpi). 8.5 x 14 inches is the largest print size this printer can handle.” This printer also features a scan resolution of 1200 x 2400 dpi, which is relatively high for a laser printer. “LCD with a single touchscreen,” according to the printer’s 2.2 ratings. You have two options for connecting your HP Envy 4520 printer to a computer: a wired or wireless network.

Detailed instructions for configuring an HP Envy 4520

The following are the procedures to be followed to configure your HP Envy 4520 printer:
Take the new HP Envy 4520 printer out of the box and set it aside.
Then, one by one, remove the printer covers from the printer.
Check that your envy printer is close to a power outlet before proceeding.
It is necessary to utilize a USB cable to connect the printer to the power outlet.
Before switching on the printer, you must first turn on the power outlet.
Please navigate to the printer’s settings after it has been turned on and started printing.
Afterward, make the necessary adjustments so that you may have access to the cartridge slots.
Replace the ink cartridges in their proper places on the printer.
Insert the required number of sheets into the printer’s input tray.
Create a wireless network between the computer and printer to share files and printing settings.
Download and install the required driver software.
To confirm that the HP Envy 4520 setup is correct, print a piece of paper.

Download and installation of the HP Envy 4520 driver

HP printer drivers are required for the printer to operate correctly. You can print utilizing all of the advanced features if you have a driver compatible with your printer. The driver for your HP printer is necessary, regardless of the printer’s model. The HP Envy 4520 driver for Windows and MAC is easy to obtain and set up on your computer.

Download and install the HP Envy 4520 driver on your Windows computer.

The instructions below will walk you through obtaining and installing the HP Envy 4520 driver for Windows: Step 1: Download and save the HP Envy 4520 driver to your computer’s hard disc.

Install the HP Envy 4520 driver for Windows on your computer.
Please navigate where the downloaded driver was saved and double-click it.
Then you may start the driver installation process.
Installing the driver is as simple as running the setup application.
Make sure you choose the connectivity setup method while installing the driver.
Last but not least, insert the paper into the printer and print a document.

Download the HP Envy 4520 driver for Mac OS X.

The following are the steps to take to install the HP Envy 4520 driver on a MAC:
Install the HP 4520 driver on your MAC computer.
Once you’ve done that, run through the installation process to get the driver up and running.
To install the driver, follow the wizard's instructions.
During the structure of the envious driver, make sure to pick the network configuration technique.
Navigate to the location of a file on your device.
Finally, load sheets of paper into the printer tray of the HP Envy 4520 and print a file from your computer.

The HP Envy 4520 Wireless Printer is configured.

Setup your HP Envy 4520 wifi network in a matter of minutes.

HP’s Smart Application

Instructions for configuring the HP Envy 4520 wifi can be found in the following section:
Download and activate the HP Smart App to begin the software installation process.
Continue to follow the directions provided by the wizard.
Afterward, the program should be downloaded, installed, and launched.
Modify the HP Smart App to reflect the changes that are required.
Connect your Envy printer to the HP Smart App using the USB cable.
Complete the wifi configuration process.

Configuration Wizard for Wireless Networks

To configure your HP Envy 4520 printer to connect to a wireless network, follow these instructions:

Navigate to the printer’s wireless network configurations.
Navigate to the wifi configuration wizard by clicking on the link.
Your envy printer will provide a list of wifi networks currently available.
Select your wifi network and connect to it following the wizard’s instructions.
After that, finish configuring the HP Envy 4520 wireless network.
Finally, it is necessary to print a test document.

HP Envy 4520 Printer Troubleshooting

The HP Envy 4520 printer is not printing correctly.

If your printer is not printing, use the below-mentioned procedures to identify and resolve the issue.

To begin, connect your computer to your printer.
Examine the printer’s wireless network to see if it’s working properly
Then, on your computer, check that the wifi network is operational.
Ensure that both the printer and the computer are connected to the same wifi network.
Check to see if the firmware on your printer is up to date at this point.
Make sure that the printer’s settings are correct.
In the final step, print using your envious printer.
If your printer is not functioning correctly, don’t hesitate to contact us.

HP Envy 4520 printer