Table of Contents:-

When is the perfect time to replace Imaging Drums?
• When should I change the imaging drum?
• What are the next steps of replacing an Image Drum?
Conclusion

When is the perfect time to replace Imaging Drums?

One of the essential units of modern-day printers, imaging drums have a typical lifetime of 15,000 pages. They may either have a two-piece cartridge system as in Dell and Brother printers or have a single unit. Depending on their assembly, you then need to find the perfect brother toner for the machine to start printing. Some advanced drums may also have a longer life which can be found mentioned in their packaging or specifications.

However, certain conditions, including the temperature, type of paper, moisture, usage type, can lead to fluctuations in its longevity. While rough usage often leads to faster deterioration of the drum, proper usage often goes a long way. You can also extend their lives by occasionally cleaning the corona wire. This can be done by sliding the plastic piece attached to the corona wire back and forth a few times.

When should I change the imaging drum?

Almost every printer nowadays comes with a separate replacement drum light that automatically turns on when it's time to change the drum. Some models even stop working the instant the light turns on. This avoids further damage to the printer as a faulty imaging drum often puts much pressure on the toner.

Nevertheless, you can also replace the drum when your image quality starts to decline. While this often happens due to an empty toner, if the situation persists even after changing the toner, you will need to make the change. You may see colour swaps, glitches, blank spots and even low colour saturation in the print outs. Similarly, when ignored for too long at a certain point in time, the machine will just stop printing.

What are the next steps of replacing an Image Drum?

Once you have replaced the imaging drum, you then need to reset the counter. Skipping the part will just make your printer interpret that you haven't changed the faulty drum, and hence it will keep on flickering the 'replace' light. Thus, while some printers might not work properly, others might stay suspended until the necessary changes are made.

Resetting your drum signals the counter to reset its time so that it can notify you when the next replacement is needed. Proper tracking of drum unit working is needed for this, and even a little here and there can lead to issues.

Conclusion
Let's admit that replacing an image drum is no cakewalk. It demands time and effort, which most of us lack owing to our busy schedule. If you want to avoid this situation for a long time, consider buying quality printer supplies in the first place. Just go for an ideal online seller like Cartridges Direct and buy branded printer accessories at an affordable market price. The best part is that you will rest assured of quality performance and avoid replacement and repairs for at least the next 4-5 years with ease. It's always better to make an informed decision to save money.