Why Use Pneumatic Valve Actuators?

Why Use Pneumatic Valve Actuators?


Valve actuators, used for operating valves for opening, closing or modulating service, come in a variety of configurations and power sources. Two of the most recognizable types based on these criteria are pneumatic and hydraulic. Each has positives and negatives depending in part on the specific application, space requirements, operating pressures and speeds needed for safe valve operation.Get more news about pneumatic actuated valve,you can vist our website!

Even on a single application, there can be a combination of both pneumatic and hydraulic valve actuators. In remote locations, where neither compressed air nor electricity is available, hydraulic is often the choice.

In refineries, chemical plants and pipeline compressor stations, where compressed air sources are available, the features and capabilities of a pneumatic actuator are usually more favorable.

Pneumatic actuators valve
Pneumatic actuators are designed to operate a piston within a closed cylinder. Pressure from an external air or gas source powers the actuator, moving the cylinder to fully open or close the valve, or partially modulate its open/close movement.

Depending on the valve type, the pneumatic actuator valve can either operate in a 90-degree horizontal direction or in a linear up and down motion.

Hydraulic actuators
Hydraulic actuators operate similarly to pneumatics except the power medium is a non-compressible fluid which, if leaked, can have potentially dangerous effects. Both pneumatic and hydraulic actuators can be configured either with a compressible spring that extends or retracts the piston, or a design with an air or liquid inlet on either side of the piston that allows double-acting operation.

Some of the uses of pneumatic valve actuators
Pneumatic valve actuators are typically used in oil refineries, chemical plants, power plants, water treatment, marine terminals and mining. They are usually made from materials like stainless steel, carbon steel and aluminum.

For industries that have complex pipe and product delivery conduits, stainless steel pneumatic valve actuators are used to manage corrosive liquids.

Precise flow and direction of corrosive liquids, dangerous fluids, and chemicals require robust hardware capable of working under high and heavy payloads. The hardware must also be able to maintain precision movement and flow direction with intricate pipe networks. These systems require the power of pneumatic valve actuators to function properly. Pneumatic actuators offer a range of commercial advantages above and beyond hydraulic actuators.

Views: 3

Comment

You need to be a member of On Feet Nation to add comments!

Join On Feet Nation

© 2022   Created by PH the vintage.   Powered by

Badges  |  Report an Issue  |  Terms of Service