The construction waste crusher is a crushing station for the utilization of construction waste resources. It integrates construction waste receiving, crushing, transmission, processing, reprocessing and other technological equipment as a whole. Through different equipment combinations, it becomes a powerful set of mobile production processing Line, complete multi-demand construction waste processing and processing operations. However, the working efficiency of the mobile construction waste crushing station is sometimes different. The following describes the factors affecting the efficiency of the construction waste crusher.

1. Consistency of pressure and screening rate

Construction waste crusher will continuously transport, crush and sieve garbage during the production process, and garbage will be subjected to different degrees of pressure during this process. Of course, the greater the pressure, the greater the effect of crushing. The better. Some users have inconsistent pressures and sieving rates during operation. This is mainly because when the equipment is processing garbage, the garbage is in a compressed form and the shaping is restricted, so that the work efficiency will be greatly affected.

2. The level of speed

The speed of rotation has a certain effect on the pass rate of finished products and energy consumption. In the case of constant pressure, if you change the diameter of the motor pulley of the crusher and then adjust its speed, you will eventually find that the faster the speed, the less complete the crushing is. The amount of particles gradually increased. Therefore, during the production process, it is necessary to pay attention to the speed not to be too high, so as not to cause the product quality to decline.

3. The size of the load

The size of the load also means the amount of feed, and the working efficiency of the equipment has a great relationship with the load. When the crushing station is running, if the load exceeds the required load, then there will be different degrees of equipment jamming. Productivity. Therefore, in order to ensure the normal progress of production, the amount of feed must be strictly controlled during the operation of the equipment.