Engineered wood flooring is a versatile and resilient flooring option. Each floorboard consists of three or four layers of wood, glued together at right angles to create a plank around 14mm thick. It has a real wood veneer of around 4mm on top.

COST

Prices range from about £19 per square metre to more than £166 per square meter.

WHERE TO LAY?

Anywhere it won’t be exposed to water or humidity. Wooden stairs are very difficult to lay and fitting around places such as toilet pans is hard to achieve a good finish.

MAJOR ADVANTAGE OF ENGINEERED HARDWOOD FLOORING IN DELHI

It is more resistant to moisture and heat compared to solid hardwood.

It’s construction method makes it more stable than a piece of solid wood; it is less likely to buckle or gap.

You can install engineered hardwood flooring at any level, including below ground. In contrast, solid hardwood floors cannot be installed in basements.

It is more attractive than laminate flooring and cheaper than comparable solid wood planks.
It is highly durable and long-lasting.

Read Also - SPACE SAVING FURNITURE

DRAWBACKS OF ENGINEERED HARDWOOD FLOORING

There are very few drawbacks, but tongue-and-groove is harder to install than click-lock.

It can be a lot more expensive than laminate.

WHY CHOOSE ENGINEERED HARDWOOD FLOORING?

Mostly People are choose engineered hardwood flooring for home, and office beauty to your home, there is no substitute for genuine hardwood flooring. Whereas both engineered and solid hardwood floors are both made from 100% real wood, there are significant differences in their overall construction. These aforementioned differences give rise to two very different products with very different appeals. Engineered hardwood flooring construction has several benefits over solid hardwood. Firstly, engineered hardwood reacts favorably to temperature and humidity. With solid hardwood flooring, any changes in either temperature or relative humidity can cause the boards to warp, gap or buckle. Engineered wood flooring, on the other hand, is more dimensionally stable, due to its multi-layer construction. The dimensional stability of engineered wood means it can be used with underfloor heating and in areas where humidity fluctuates, such as kitchens, conservatories, rooms with log burners and rooms with large amounts of glazing. Engineered wood floors offer an advantage in their installation method. Solid hardwood must usually be nailed down to a plywood subfloor. Engineered wood can be either stapled or glued down over a wood or concrete subfloor. Furthermore, some engineered wood floors can be installed using a ‘floating’ system, where the planks are fastened to one another, and are simply ‘floated’ over padding or underlayment. There is little difference in cost between solid hardwood flooring and engineered hardwood flooring. In fact, engineered wood flooring will generally cost you less than solid wood for the same look, because less of the ‘species’ tree is used to create engineered wood. Plus, freight costs are lower with engineered wood, because it is lighter in weight, and therefore less costly to transport; this also means that the product is more environmentally friendly, as it uses less CO2 to transport it in the long run.

Benefits to buy Engineered Hardwood Flooring
Easy to install and maintain;

More dimensionally stable, due to multi-layer construction;

Resilient and durable—it reacts well to increased temperature and humidity;

Environmentally friendly, due to lower transport emissions;

Versatile—due to its increased dimensional stability, it can be installed in an array of different spaces from kitchens to conservatories.

Hardwood Flooring

Wooden Flooring in Delhi

Solid Wood Flooring

Herringbone Wood Flooring

Laminate Wood Flooring

Engineered Wood Flooring