Each formula of industrial painting differs. It is possible to choose one or another based on the application. The primary difference between coatings will likely be the kind and quantity of additives that are used in their formulation. Additives can be used to modify the natural properties of the coating and resin to provide a higher quality finished product. These are only a few ways additives can be used to enhance industrial painting.

Gloss

The amount of gloss a certain finish gives off is one part of additives for paints and coatings. You can alter the gloss of industrial paints by altering their levels. This is usually done by using additives that improve the flow and level of coatings to create the most shiny and reflective finish. If you want a matte finish, it is possible to do the opposite.

Leveling

The rate of cure for resins in the presence of air can be affected by additives. When first applied the coating will be uneven because of the irregular shape of the materials within the paint. The coating will create an impervious seal when it is placed over the surface. The resin can dry too fast or unevenly, causing bubbles, fish eyes or an orange peel-like texture. This is due to the fact that resin isn't able to provide the same resistance to cracking or chipping as other paints. Paint additives are able to smoothen the flow of paint, and also make it dry quicker so that the particles have enough time to bond and level out properly.

Stain Resistance

Some industrial paints use additives that help to resist staining. These coating additives create a surface less permeabil to chemical agents that would result in staining. It is possible to reduce staining and discoloration by sealing pores and creating better barrier.

Hardness

Other additives can be added to resin to enhance its toughness after it has dried. This makes sure that any object which scuffs the surface of the coating will slide off without leaving behind a mark. This is a valuable property in areas that the coating is expected to be used by industrial equipment which could otherwise damage the surface layers and expose the layers below.

Additives for Surface Adhesion

In some applications it is crucial that the paint is indestructible to other coatings that are used. For instance, certain municipal authorities use coatings that contain adhesives for surfaces to stop graffiti from sticking to the surface of the original coating. This creates a challenge when you want to repaint the surface. You might require an entirely new kind of additive known as wetting agent to make sure that the new coating is adhered to the old resistant coating.

There are dozens of additives used to change the properties of industrial paints. Some coating additives can interact with others. Paint makers must consider the balance of the formulation to get the best possible qualities. While shopping for paints, it is especially important to investigate the various additives used and how they will affect the finished surface in your facility.

A painting expert can help you determine which paints are best suited to your specific needs. They can also describe what these properties means for the application you are using it for and its long-term. For more details, contact Performance Painting today and speak to one of our paint experts.