In fact, the setup Canon PIXMA MG2522 Printer wireless link on your desktop is quite simple. This paper discusses the measures to use the WPS connection technique to install wireless link. There are some conditions that need to be met before beginning the set up Canon PIXMA MG2522 Printer, such as having a physical WPS push button on your access point and using the WPA2 security protocol or WPA on your network.

Turn the printer on first. Press and hold the Wi-Fi button until one flash of the indicator lamp. Make sure blue light flashes.

In 2 minutes, press the WPS button on your access point. While searching for your access point, the blue light will continue to flash.

The energy and Wi-Fi lamp will flash once it connects to the access point.

If the method succeeds, both the energy and the Wi-Fi lamp will stop flashing and stay illuminated.

Try to print out your printer's network settings to verify whether the method is effective or not.

Put a paper sheet to set up Canon PIXMA MG2522 Printer.

Press and hold the Resume / Cancel button until 15 flashes of the indicator lamp, then release it.

Your printer will print the data page on the network, which implies effective installation.

Set Up Canon PIXMA MG2522 Printer For Windows:.

Setting up a printer on a laptop may be a problem for some individuals. This paper explains how to setup Canon PIXMA MG2522 Printer to a Windows operating system computer. Each printer should have a driver CD in their packages, so be sure to verify it beforehand.

Insert the CD in the package that came in.

Follow the wizard for setup.

Test your printer once it's finished to make sure it's working.

There is also an alternative to set up setup Canon PIXMA MG2522 Printer by following the measures below without installing additional software:.

Use a USB cable to connect your printer.

Open the control panel and double-click the icon for the printers or printers.

There will be a fresh window, then select Add a printer icon.

There will be a Windows Printer Wizard, then click Next to begin the wizard.

A Local or Network printer will be installed. Choose this printer's Local printer, then click Next.

A prompt will appear for the place of the printer driver. Choose your driver's folder or press the printer CD to setup Canon PIXMA MG2522 Printer.

Test your printer by right-clicking on the printer icon and clicking on characteristics after the setup is completed. Choose Print Test Page from that window. Your printer is supposed to operate correctly.

Setup Canon PIXMA MG2525 for Mac :.

Because of several variations from the setup on Windows OS, setting up Canon PIXMA on Mac can be a bit hard for some individuals. This paper will offer you a short overview of how to setup Canon PIXMA MG2522 Printer on Mac OS.

First of all, you must uninstall any other Canon driver in your Mac Disconnect printer.

Download on Canon's official website the software driver.

Open the driver and obey the wizards for setup.

Upon completion of the setup, go to the system choice by clicking on the top right of the Apple icon.

Connect and switch on your printer via a USB port to setup Canon PIXMA MG2522 Printer for Mac.

To add a printer, open Print and Fax and press the plus button on the left side of the window. The list should include your fresh printer. If your printer name has not been found, redo step 1 to step 6 and ensure that your present printer driver is correctly installed.

Click your present printer model and then press Choose a Driver or Printer Model, then click Choose Printer Software.

Choose your printer from the list and press the OK button.

To know more visit:https://www.setupcanonprinter.com/blog/setup-canon-pixma-mg2522-printer/