Steps for Canon Pixma MX490 Setup:

Let's use normal wireless configuration to discuss the Canon Pixma MX490 setup:

Make sure your router is correctly configuration before setting up and there is no network problem. Also, make sure for further exercise that both the system and the network are linked smoothly.

Ensure that the printer is plugged into the socket and the power is turned on, the printer's Green LED light shows it is ON.

Even the printer is switched on when the screen display is blank, then click the copy button. Then click the setup button on the touch panel display when screening in ON.

On the touch panel, hit OK button from the wireless LAN Setup option. It will begin searching for multiple modes now. Click Stop until you see on the screen "Wireless LAN setup followed by Standard configuration."

Scroll right to see multiple alternatives and click OK after selecting less configuration cable on your printer.

Now you need to install your system's printer software. You can do this either by CD ROM or by downloading it manually from the website of the canon.

Start with your language, nation, and select the printer's model.

Choose the machine, operating system and folder where you want the driver file to be downloaded. To start it, double click on the downloaded file and operate its setup as well.

Select your wireless LAN link printer technique now as your Canon Pixma MX490 printer connection technique and click wireless router method to connect.

Software will automatically search for your printer that is already attached to the network to maintain your printer on, and then press next.

Click on the less setup submenu next to the cable.

When the installation of the network has been resorted, click on the permit and agree to begin the process. After the option has been presented, tap the full tab and install the configuration.

Click on the print test page after installation to check if the configuration is not precise, press the execute button.

Further Contact Experts to apply the above steps Here you will see effective message display finished installation on your screen. Use your Canon Pixma MX490 printer to readily print or scan. Hope steps above will assist you connect your C

anon Pixma MX490 printer to a wireless network and operate smoothly. If any problems arise, you must contact Canon Customer Service Number and connect to deft experts. They will provide you with the step-by-step procedure to do the same and help you totally eliminate your problems.To know more visit the site: https://www.setupcanonprinter.com/blog/setup-canon-pixma-mx490-printer/