Welcome to
On Feet Nation
Posted by Susan on September 23, 2024 at 12:27am 0 Comments 0 Likes
Posted by Eric on September 23, 2024 at 12:23am 0 Comments 0 Likes
Posted by Andrew on September 23, 2024 at 12:23am 0 Comments 0 Likes
The most common door closers in the market today are surface mounted, overhead concealed and floor mounted concealed. When choosing the best one for your application, consider these important factors:
location and type of opening
interior or exterior mounting
volume and frequency of door traffic
type of door
size and weight of door
door swing
wind or building pressure conditions.
Surface mounted door closers are most commonly used since…
ContinueAdded by Degol on June 22, 2021 at 2:43am — No Comments
Door handle installation method
According to the size of the door handle, drill the corresponding installation holes in the door, and open the door during installation to facilitate the operation of the door handles on both sides of the door. Put the corresponding parts into the holes in turn, fix the screws with the corresponding screwdriver after aligning, install the screw and connecting screw on the outer panel part, insert the linkage square rod into the square rod hole of the…
ContinueAdded by Degol on June 19, 2021 at 3:33am — No Comments
As one of the more highly utilized recessed hinges, a butt hinge is typically manufactured to be about 6 inches or shorter. They have multiple uses and are installed for a variety of different applications. Generally, a butt hinge is used to mount and operate doors on commercial properties and residential homes.
A butt hinge is usually comprised of two leaves that match. One is usually attached to a fixed component (such as a door jamb) and the other is attached to a moving component…
ContinueAdded by Degol on June 9, 2021 at 12:10am — No Comments
© 2024 Created by PH the vintage. Powered by