Once you have determined the size and number of panels you will need you must build an array. This is simply several solar cells linked together with tabs. You must be very careful with your solar EZ Battery Reconditioning cells as they are rather fragile.Place them upside down on a ready made pattern or jig, quarter-inch plywood is sufficient, and solder the tabs to each cell (cells commonly come with the tabs you need). Once the tabs are in place, you can solder each tab to the next cell, creating a panel of cells. Flip them carefully for placement in the solar panel.

http://theezbatteryreconditioningreview.com/

The biggest problem with homemade solar panels is moisture getting inside the unit and degrading connections or cells. To prevent this you can use a layer of foam tape available at any hardware store around the edges, and then affix your Plexiglas over this with a screw every six inches.This is a very basic outline for the procedure. To be completely successful you may need battery storage and regulators as well as an assessment of the best placement for your panels. You will also need to add a junction box and some other key components, but this is a basic outline for creating solar panels for your home.