In the case that you encounter a problem with your HP Printer In Error State, we are going to explain to you how the error can be resolved. You just need to follow the below instructions carefully, and the problem will be solved.

Solution 1 – Check the printer’s connection

Start by checking your computer and printer connections to ensure that they are properly connected. If both are properly connected, then run a test job.

Solution 2 – Restart your device

Restarting devices connected to the printer can resolve the issue of 'HP printer in error state'. For this, power down your computer and printer and let them rest as they are for a while, then turn them back on to see if the issue has been resolved.

Solution 3 – Confirm if your printer is online

In order to bring your printer online, you need to check its status first. If it is offline, follow these steps:
Navigate to 'Start' and then 'Control Panel'.
Select the ‘Devices and Printers’ option.
Find out whether the printer is online or not.
You'll see 'Ready' if it's online.
You can make a printer online by right-clicking on its icon and choosing 'Use Printer Online'.
With that, the status will be changed to ready.

Solution 4 – Check if the paper is loaded in the paper tray

You should load the paper in the printer tray after your printer has been switched off. After your printer has been turned on, you can check for an error.