Blog Posts

Orthodontist Greystone AL

Posted by Micheal Alexander on March 18, 2024 at 11:28pm 0 Comments

Welcome to Edwards Orthodontics, your trusted source for high-quality orthodontic care in the heart of Greystone. We are dedicated to helping you achieve a beautifully aligned, healthy smile that you can be proud of. Our team is here to provide personalized orthodontic solutions that cater to the unique needs of each patient. Orthodontist Greystone AL



Why Choose Edwards Orthodontics as… Continue

Automated Sliding Doors

Posted by gilbert65jke on March 18, 2024 at 11:23pm 0 Comments

Automated sliding doors offer seamless, efficient entryways, using motion sensors or access control systems to provide convenience and accessibility, enhancing flow in high-traffic areas while ensuring security and energy efficiency.
https://www.dacautomation.co.uk/services/automatic-sliding-doors/

Degol:How to Install Cabinet Hardware ?

Use the Door Rail as a Guide
The location of knobs and pulls isn't written in stone, but there are some standard practices. One good rule of thumb is to line up a knob with the top of the bottom door rail. If you're installing door pulls, line up the bottom of the pull with the top of the door rail. Always center them on the door stile.
Cover Unused Holes With Tape
Store-bought templates and well-used homemade templates have a bunch of holes you won't use on every job. Avoid using the wrong hole by sticking masking tape over the template and poking through only the holes you need. Instead of using a pencil to mark the location of the hole on the cabinet, use an awl. That way your drill bit won't skate off in the wrong direction when you drill the hole.
Make a Simple Drawer Template
If you don't have a template, make one. This simple template consists of two pieces of wood and takes only a few minutes to make. This same template can be used for almost any size door and most hardware sizes.
Two-Sided Templates Prevent Tear-Out
If you're having problems with the wood on the back of the cabinet doors tearing out every time you drill a hole, make a two-sided template. Make sure the spacer wood is close to the same size as the cabinet doors. The tighter the fit, the less chance of tear-out.
Use Thread Sealant to Keep the Screws Tight
Every time the screw in a knob works itself loose, the owners of those cabinets are going to think unflattering thoughts about whoever put them in. Avoid the problem by adding a dab of thread sealant to every screw you install.
Perfect Finish Touch-Ups
After you finish installing cabinet knobs, set aside a small container of the paint or finish used on the cabinets for future touch-ups. If the cabinet manufacturer didn't include one with the cabinets, you can make one by cleaning out an old bottle of nail polish with nail polish remover and filling it with your paint or finish.

handle cabinet lock,kitchen cabinet door handle position,flush handle cabinet,cabinet handle sets

https://www.degolhardware.com/FH101-Stainless-Steel-T-Bar-Cabinet-D...

Views: 3

Comment

You need to be a member of On Feet Nation to add comments!

Join On Feet Nation

© 2024   Created by PH the vintage.   Powered by

Badges  |  Report an Issue  |  Terms of Service