download crack for vectordraw 6

Name: download crack for vectordraw 6
Category: Download
Published: joyhoodewind1976
Language: English

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AMP and Voltage telemetry sensors.
Created Size Downloads 2018-04-12 828 B 477 200SRX Version:v1.
SBUS (Futaba Channel Order) with BD3SX.
SC: High, Middle, Low Rates.
S2: Tail Gain Adjustment.
Configured as per Blade 180CFX manual with AUX2 programming.
Created Size Downloads 2016-02-01 77.03 KB 1321 Thunder Tiger Raptor 30 v1.
Basic setup (Normal + Idle-Up1 + Idle-Up2) for Horizon Hobby Blade 130X based on the default values described in the user guide. Read the detailed description for the switch description. This is an OpenTX 2.1 version.
I've made a profile for my XK 110 and taranis with multimodule.
LS: Volume Control.
SH: Captain Rescue.
Trex 450 heli with flymentor.
Basic setup (Normal + Idle-Up1) for T-Rex 500 ESP with Flybar. Futaba Setup.
Created Size Downloads 2015-11-11 77.03 KB 2630 Heli Normal Swash Gyro Governor Version:2.1.3.

I've been flying my Gaui X3 with this configuration for quite some time now and it flies great.
Created Size Downloads 2014-08-05 77.03 KB 1587 Gaui X3 with BD3SX.
Setup T-Rex 550L Futaba SBUS style, setup with Brain / Icon Flybarless system.
OpenTX 2.2 model for Blade 180CFX.
I use OpenTX 2.2.0, be aware.
Setup for Blade 270 Fusion with an Orange module.
T-Rex 450L setup Futaba SBUS style, BRAIN / ICON Flybarless System.
S2: Tail Gain Adjustment.
Created Size Downloads 2014-08-05 77.03 KB 1664 T-rex 450 w Flymentor and sounds Version:3.
Created Size Downloads 2015-12-06 76.03 KB 2345 Blade Nano CPS Version:2.1.6.
SBUS (Futaba Channel Order) with BD3SX.
Used with home made dsm2/x module.
Thunder Tiger Raptor 30 v1 with OS .37 engine and Futaba GY401 gyro.
Hurricane Helicopter settings. FM phases (Hover, Trans and Acro)(SE), with throttle stick block (SF) and Cut glow engine with full closed carburetor (SH). Gyro connect and disconnect (SC).
AMP and Voltage telemetry sensors.
Created Size Downloads 2015-11-29 190.38 KB 1504 Helicopter FBL template Version:V0.75.
Curves copied from original manual.
Created Size Downloads 2015-12-06 76.03 KB 1889 T-Rex 450L Dominator.
Model for Blade nano cpx, with timer, idle up and throttle hold.
P.D. Voices in Spanish.
I included my soundfiles for FM postionmode FM balance mode FM off. as well as the other files i use for flightmode normal flightmode idle up and so on.
4 Flightmode, Throttle hold, Normal and idleup 1 and 2.
Specifically for 200SRX (fixed pitch)
Created Size Downloads 2017-01-31 77.03 KB 1452 XK 110 / V977 Taranis Multimodule Version:1.0.0.
Created Size Downloads 2016-01-25 77.03 KB 1740 Heli Tracker.eepe Version:6.
Miniature Aircraft X-Cell Helicopter with OS .46, Futaba GY401 Gyro.
Created Size Downloads 2019-01-23 76.01 KB 470 Synergy E5 (08.2014)
SE - Mode SF - Thottle hold SG - DR/Expo (low/medium/high) SH - Rescue.
Configuration designed to work with DSMX module (example tested with ORX DSM2/DSMX Module with push button selectable protocols) in 22ms DSMX (two flashes) mode. All flight modes implemented (stability, 3D/acro, safe) with throttle and pitch curves approximating recommended settings. Expo/Rates for Aileron, Elevator, Rudder set to switch.
LS: Volume Control.
Powered by jdownloads.
Created Size Downloads 2017-09-25 1.13 KB 1621 Blade 180CFX Version:2.2.
Timer for total flight time and battery.
Helicopter template for FBL helicopter.
Created Size Downloads 2017-10-15 955 B 639 Trex-500 Flybar OpenTX 2.2 Taranis Version:OpenTX 2.2.
There are 3 modes: Normal, Idle 70% and Idle 100%.
Created Size Downloads 2016-10-01 77.03 KB 1373 Miniature Aircraft X-Cell 46.
This is a Flybarred Trex 500 for Taranis running OpneTX 2.2.
Created Size Downloads 2016-12-26 77.03 KB 1364 T-Rex 450 SE.
T-Rex 450 SE with Futaba 401 gyro. CCPM configured helicopter.
Helicopter with normal Swash plate. Throttle Cut - Flight Mode Throttle Hold with Throttle hold Delay - Flight Mode Normal (When 15% of stick governor enable at 1600 rpm) - Flight Mode Idle Up1 (governor enable at 1800 rpm)- Flight Mode Idle Up2 (governor enable at 1900 rpm). Governor On Off switch - Gyro On Off switch (Normal - AVCS). Fail safe all return to center.
Created Size Downloads 2016-12-26 77.03 KB 2211 Blade 180 CFX.
SC: High, Middle, Low Rates.
PPM tuned for Orange PPM module.
Voice Alerts on all mode changes.
Created Size Downloads 2015-12-23 77.03 KB 1801 T-Rex600ProFBLv2 (V-Stabi, SBus, Taranis X9E) Version:1.
Created Size Downloads 2015-11-30 190.94 KB 2210 T-Rex 550L Dominator.
I'm putting this out there hopefully to help. It is my eePe file for my Taranis Plus, X8R and Ikon setup. I am also using version 2.1.7. I have not flight tested yet due to waiting for parts. But a bench test showed everything working.
SH: Captain Rescue.
Created Size Downloads 2017-12-31 917 B 840 Blade 270 Version:1.0.
Created Size Downloads 2015-11-06 77.03 KB 1814 Blade 130X Version:1.0.
Trippel rate, shared switch for Travel limit and Expo for Aileron, Elevator and Rudder.
Created Size Downloads 2014-05-11 1.16 MB 2213 Hurricane.
SE / SB: Flight Modes (4 Flight Modes + Normal.
Created Size Downloads 2016-10-01 77.03 KB 1160 Taranis with Ikon Version:Final.
Created Size Downloads 2015-11-28 76.03 KB 2292 Trex 500 CCPM Base Version:OpenTX 2.1.5.
Taranis X9E with X6R connected by SBUS to V-Stabi 5.2.
Created Size Downloads 2014-05-01 5.81 MB 1341 Align T-Rex 500 ESP with Flybar.
Throttle based timer - 5 Mins.
This is a base working CCPM eepe for the Trex 500 Electric. You may have to adjust your curves but it is a good base.
SE / SB: Flight Modes (4 Flight Modes + Normal.
http://suppmantpesogira.eklablog.com/surveys