download dragon city

Name: download dragon city
Category: Downloads
Published: agchignacha1986
Language: English

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

In order to run Leela Chess Zero in Lucas Chess, create a ‘LCZero’ subdirectory in Lucas Chess’s ‘Engines\Windows’ folder, and copy the aforementioned required files to that folder. Alternatively, you can copy the Leela Chess Zero training instance folder to the ‘Engines\Windows’ folder, since it contains the required files mentioned above.
In the Fritz start menu, click ‘Enter & Analyse’ Select the ‘Engine’ tab, click ‘Create UCI Engine’ In the ‘Set up UCI Engine’ dialog, select the ‘lczero.exe’ file located in the aforementioned folder via the respective file selection dialog.
In Cute Chess, select ‘Tools’ > ‘Settings’, then click the ‘Engines’ tab Click the ‘+’ in the lower left corner of that tab to open the ‘Add engine’ dialog.
Website of the author: http://lczero.org.
Extract the files ‘InBetween.exe’ and ‘InBetween.ini’ to the aforementioned ‘LCZero’ subdirectory Edit ‘InBetween.ini’ and prov >; at the beginning of the line to activate the command)
An updated guide is published in the blog.
To finalize and verify the process, click ‘Ok’, then click ‘Start’, and close the ‘Analysis Engines’ dialog. The engine should immediately start, and begin to analyze. To verify gameplay, select ‘Play’ > ‘Tournament’, and assign the engine to one of the two engine slots (assign a different one to the other slot), then click ‘Ok’ to start the tournament. Both engines should be loaded and begin to play.

Then Nibbler will need two thing:
To finalize and verify the process, click ‘Ok’, then click ‘Change Main Engine’ and select LCZero from the list. Now start a new game by selecting ‘Home’ > ‘New Game’, and make the first move. LCZero should begin to play once it is her turn to do so.
Name and Author should be filled in automatically, and no further configuration is required.
This page was originally written for the lczero engine. The current engine is lc0 . While most of the instructions still apply, there are some differences. Several command line parameters have changed. Not everything has been corrected, so verify that the examples specified still work. \ In particular the -noponder and -uci options do not work, while lc0 accepts long options prefixed with -- and only short (single letter) options prefixed with - .
Fritz unfortunately doesn’t accept any command line parameters for external engines, so a little workaround is required to utilize the engine in this GUI. It is the utility ‘InBetween’ by Odd Gunnar Malin, which intercepts communication between the GUI and the engine, and allows on-the-fly modification of the transferred data. The utility can be downloaded here (scroll down). You use it as follows:
Windows users can download everything needed to run the engine from the releases page. The following versions are available.
The LCZero chess engine. CUDA only works on NV >
and in tab ‘Special:
Note: For the purpose of creating this guide, v1.3 of the ‘InBetween’ utility has been used.
In order to run Leela Chess Zero in the GUI version of Cute Chess, create a ‘LCZero’ subdirectory in Cute Chess’ engines folder, and copy the aforementioned required files to that folder. Alternatively, you can copy the Leela Chess Zero training instance folder to the engines folder, since it contains the required files mentioned above.
Note: Utilization of Leela-chess in Fritz requires v0.6 (or higher) of the engine. Previous versions don’t work in Fritz.
In order to run Leela Chess Zero in Arena, create a ‘LCZero’ subdirectory in Arena’s ‘Engines’ folder, and copy the aforementioned required files to that folder. Alternatively, you can copy the Leela Chess Zero training instance folder to the ‘Engines’ folder, since it contains the required files mentioned above.
Once you have the required files in place, add the engine to Arena:
lc0-windows-cuda.zip for PCs with recent NVIDIA GPUs, lc0-windows-opencl.zip for AMD and older NVIDIA GPUs, lc0-windows-blas.zip for PCs without a dedicated GPU.
Name: LCZero Command: lczero.exe -w (optional: additional parameters according to the list above, for example –noponder) Working Directory: Protocol: uci.
Leela Chess Zero (LCZero) utilizes the UCI (Universal Chess Interface) protocol, and hence can be run in any Chess GUI that supports that protocol.
Once you have the required files in place, add the engine to Scid vs. PC:
To finalize and verify the process, click ‘Apply’, then click ‘Start this engine right now!’. LCZero should be started, and by pressing you can verify her output in the engine log.
Note: All file paths configured in Scid vs. PC require a slash (/) as file path separator, not a backslash (\).
Execute the nibbler.exe file. On the top menu, click on `Engine` -> `Choose engine…` and select the lc0.exe file from LCZero. On the top menu click on `Engine` -> `Choose weights file…` and select the network you downloaded.
From version 0.7:
Now add the following configuration information:
Nibbler is a recent chess GUI especially built for and only LCZero.
In Scid vs. PC, select ‘Tools’ > ‘Analysis Engines’ to open the ‘Analysis Engines’ dialog Click ‘New’ to open the ‘Configure Engine’ dialog.
Once you have the required files in place, add the engine to Fritz:
To use multiple cores if you run the cpu/blas binary :
You first need to download the release version for your distrubution (At the moment, only Windows and Linux are supported).
In order to run Leela Chess Zero in Fritz, create a ‘LCZero’ subdirectory in Fritz’s installation folder, and copy the aforementioned required files to that folder. Alternatively, you can copy the Leela Chess Zero training instance folder to the aforementioned folder, since it contains the required files mentioned above. The network file for Leela Chess Zero should also reside in the aforementioned directory, and be named ‘weights.txt’ (this is so auto-detection of that file works).
Press F11 to open the engine management window Go to “UCI” tab Uncheck “Common max CPU core settings” Go to “details” tab, select the lc0 engine in the “Command Line Parameters” textbox add “–threads=n” where n is the number of CPU worker threads to use. (see : Lc0-options for more information & options)
Once you have the required files in place, add the engine to Cute Chess:
Name: LCZero Command: /bin/engines/LCZero/lczero.exe Directory: Parameters: -w (optional: additional parameters according to the list above, for example –noponder) Webpage: http://lczero.org Protocol: UCI.
Name: LCZero Author: Linscott, Huizinga, Olsen, Diamond et al. Command Line Parameters: -w (optional: additional parameters according to the list above, for example –noponder) Country: Europe Type: UCI (Optional) Logo file: If you want the engine to use a logo file, you can download and use this one:
The engine you just added should now be selected in ‘Details’. Now add the following configuration information:
Running Leela Chess Zero in a Chess GUI.
From version 0.7:* Warning.
In order to run Leela Chess Zero in Scid vs. PC, create a ‘LCZero’ subdirectory in Scid vs. PC’s ‘bin\engines’ folder, and copy the aforementioned required files to that folder. Alternatively, you can copy the Leela Chess Zero training instance folder to the ‘bin\engines’ folder, since it contains the required files mentioned above.
In Arena, press Select ‘Details’, click ‘Installation wizard’ Click ‘Forward >>’, and in the next dialog make sure Arena’s ‘Engines’ folder is selected Click ‘Forward >>’ again, then select the lczero.exe you’ve installed earlier from the list Click ‘Forward >>’ twice, then in the last dialog select ‘UCI’ and click ‘Forward >>’ one more time.
To finalize and verify the process, click ‘Ok’, close the ‘Settings’ dialog, then select ‘Game’ > ‘New…’, and assign the engine to either White or Black by selecting ‘CPU’ and choosing LCZero from the list of engines. Click ‘Ok’ to start the game. LCZero should be loaded and begin to play once it is her turn to do so.
Note: If a file path that’s being fed to the engine contains spaces, you have to quote it. Example:
Linux and Mac users have to compile from source following the instructions in the project page.
Now add the following configuration information:
An updated guide is published in the blog.
Name and Author should be filled in automatically, and no further configuration is required.
This page was originally written for the lczero engine. The current engine is lc0 . While most of the instructions still apply, there are some differences. Several command line parameters have changed. Not everything has been corrected, so verify that the examples specified still work. \ In particular the -noponder and -uci options do not work, while lc0 accepts long options prefixed with -- and only short (single letter) options prefixed with - .
Once you have the required files in place, add the engine to Fritz:
In the Fritz start menu, click ‘Enter & Analyse’ Select the ‘Engine’ tab, click ‘Create UCI Engine’ In the ‘Set up UCI Engine’ dialog, select the ‘InBetween.exe’ file located in the aforementioned folder via the respective file selection dialog.
Instruction for Windows:
http://scoranguibeipresle.eklablog.com/acronis-disk-manager-free-do...