Members

Blog Posts

 

download ip change 8.40


Name: download ip change 8.40
Category: Soft
Published: backlisubso1988
Language: English

 


 


 

 

 

 

 

 

 


 


 


 


 


 


 


 


 


 


 


 


 


 


 


 


 


 

Achieving High-F >
Sounders (buzzers) based on piezoelectric principles are widely used in countless applications due to their small size, low power demands, versatility, and low cost. However, they have two attributes that make their use in low-voltage, battery-powered systems a challenge: They need a relatively high drive voltage (typically, tens of volts), which is unavailable, and they present a capacitive load that may be difficult to drive.
The PAM8904E (see figure) from Diodes Inc. addresses the needs of this versatile transducer. It supports both single-ended and differential output modes with minimal external components. The device operates from a wide voltage-supply range of 1.5 to 5.5 V and accepts an input signal between 20 Hz to 300 kHz.
>Ideas for Design: Vol. 1, No. 4 (.PDF Download)
In celebration of one of the most popular sections in Electronic Design's history—Ideas for Design—we're pulling articles from our archives and putting the spotlight on them. Stay tuned as we add more of these gems into this series over the weeks ahead.
Piezo-Sounder Driver Addresses Needs of this Versatile Transducer.
The integral charge-pump boost converter operates in 1×, 2×, and 3× modes, allowing the PAM8904E to generate output voltages up to 18 V p-p from a 3-V supply or 27 V p-p from a 4.5-V supply. On the output side, this IC is able to drive loads as high as 47 nF. The vendor claims that competing devices can typically only drive a load up to 15 nF and they require a higher supply voltage. The unique drive technology combines low inrush current, low EMI, and high efficiency, which are all desirable characteristics.
Piezo-Sounder Driver Addresses Needs of this Versatile Transducer.
This round of Ideas for Design articles highlights another use for the venerable LM555 timer as well as JFET amplifiers and distortion, a synthesized inductor, and improved power-factor correction.
The Garrity KE900 Flashlight Teardown.

One of the Smallest Components in Smartphones Shrinks.
The PAM8904 comes in a W-QFN2020-12 Type A package measuring just 2.00 × 2.00 × 0.80 mm; other package options are available. Additional features include thermal shutdown, overcurrent protection, and short-circuit protection. The automatic shutdown reduces current consumption to 1 µA. When combined with the wake function, the device is a good fit for power-constrained products. Prices begin at $0.30 in 1000-piece quantities; more information is available in the datasheet .
The PAM8904E driver, designed for piezo-based sounders (buzzers), has a multilevel boost converter and can drive the capacitive loads associated with these audio transducers.
The PAM8904E driver from Diodes Inc orporated is designed for piezo-based sounders. It includes a multilevel boost converter and can drive the capacitive loads associated with these audio transducers.
http://natcihindeo.eklablog.com/nod-32-download-a178154052

Views: 1

Comments are closed for this blog post

© 2024   Created by PH the vintage.   Powered by

Badges  |  Report an Issue  |  Terms of Service