C02 laser have traditionally been the laser devices of preference employed by job stores due to their reliability of performance when it comes to cutting rate, charge of function and cut quality throughout all stages of steel thickness. This enables job stores to method a full array of materials at aggressive rates.

With the popularity of Fibre Lasers growing rapidly several job stores are considering the advantages they are able to provide their company fiber laser machines pertaining to improved performance in functional charge and turnaround time. This information will explore the benefits of every laser technology, how they are able to complement each other in the right setting and how larger quantity organizations like job stores may benefit from having both.

Firstly let's outline the strengths of equally Fibre and CO2 lasers and what benefits they feature to the company function of work shop.

Advantages of Fibre Laser Engineering:

Fibre lasers have already been proven to cut faster and are cheaper to work than CO2 lasers when fabricating slim page steel as much as 5mm in thickness.

In cutting slim page metals, they are able to cut very nearly three times faster than CO2 lasers and functioning charges are generally half of what is needed to operate a CO2 due to having lower electric consumption and the absence of mirrors which are necessary in CO2 systems. Furthermore, as a result of absence of mirrors and laser gasoline they might need less maintenance. Offering times are generally 50% longer which often provides for 50% lower maintenance costs. More over they might need less consumables to work and the consumables needed are cheaper than the associated CO2 systems.

Whilst the column produced from the fibre optics is more commonly consumed in to the metals, this gives the capacity to cut reflective metals such as for example Copper, Brass and Aluminium although cutting these metals with a CO2 laser can damage the machine due to extreme right back reflection. This gives greater freedom to take on more expansive work.

Study has shown that approximately 70% of all cutting purposes in the flat page steel cutting industry have been in the thin-material selection below 5mm thick. That takes its large section of the flat page steel market.

Eventually fibre laser devices are usually less expensive to get than the equivalent CO2 lasers.

Advantages of CO2 Lasers:

The cut quality of a CO2 Laser stays regular throughout all stages of product depth although a fibre laser whilst being a remarkable cutter in the slim product selection, it starts to lose cut quality when the product depth meets 5mm.

Though fibre optics offers performance benefits in the slim product selection, CO2 lasers will outperform them when the steel depth being cut meets 5mm.

That is true in terms of

- Rate of cutting

- Cost per portion

- Quality of cut*

* Though this may be correct when comparing most Fibre Lasers to CO2, in certain models the typical consensus of cut quality in Fibre may possibly vary. At 2kW IPG's Fibre Laser models have already been show to reach corresponding to or remarkable cut quality to CO2 laser right as much as 12mm in delicate steel. As of this depth the laser also cut at the same rate to CO2 and energy consumption per cut portion was still lower utilising the fibre technology.

More over CO2 lasers may cut acrylics and timber which fibre optics can't, thereby providing greater freedom to market industries wherever the requirement to cut these materials is in demand.

Advantages of adding equally systems:

It is clear that all laser technology offers strengths that may directly complement another, with fibre providing a better efficiencies in the slim steel market (0.5mm - 5mm) and CO2 providing greater benefits in heavier area metals (6mm and above).

Most job stores have traditionally applied CO2 lasers entirely as they offer consistent cut quality and functioning charges throughout various stages of steel thickness. Provided the market advantages of fibre technology but one can simply deduce the advantages of having a one to greatly improve the function of work shop.

After work store acquires enough ongoing work quantity to warrant multiple devices it is worth considering a fibre laser as a complement to the prevailing CO2 presently in use. Lowering of ongoing charges, improved rate of cutting and the capacity to cut reflective metals have all been advantages reported by job stores who've previously taken advantage of these efficiencies provided by fibre laser machines.

Before getting the next thing you ought to contact the local specialist in laser cutting devices for more information.

When contemplating the next choice for your fiber laser machines laser cutting device, it is better to talk to some professionals and be sure that you're getting the most effective device for your operation.