Which part of the production bottleneck of raymond mill is mainly?
First we need to understand the production process of Raymond Mill: the grinding process and the wind selection process.
The production bottleneck of the grinding process is mainly: the blade angle problem, the sealing of the grinding roller assembly, and the wear resistance of the wearing parts.
First of all, the angle of the Raymond sharpening blade plays a crucial role. Some Raymond mill manufacturers tend to ignore this problem. The Raymond sharpening blade has a higher and lower position, which makes the blade shovel The material can not be accurately sent to the grinding position, which greatly affects the production of Raymond mill.
Secondly, the sealing problem of the grinding roller assembly is directly related to whether the raymond mill can be used normally or normally. If the Raymond Grinding Roller assembly cannot effectively seal, the inside of the assembly is easy to enter the powder. After the powder is fed, the total achievement of the Raymond mill is easy to break and often breaks down, which will bring a lot of normal production. Serious trouble. The latest assembly developed by SBM Machinery adopts the principle of mechanical seal, adopts multiple oil seals and progressive zero-gap seals, and the effect is consistently recognized by the society.
Finally, the wear resistance of the wearing parts, if the wearing parts (ie grinding rolls and grinding rings) use ordinary carbon steel, then it will wear out quickly, so the production cost of Raymond mill manufacturers will increase The maintenance rate will also increase. It is recommended that customers use Raymond grinding rolls and grinding rings made of high manganese steel.