All the electronic parts need to be used carefully because most of them are fragile. If you are one of them, who uses Windows on the system, then it is better you take a note of the ways for maintaining it properly.

Here are the 2 ways to automate common maintenance tasks in Windows 10

1. Scheduled Automatic Maintenance (Windows 8 And 10)

It is worth noting that Windows 8 and 10 by itself execute primary device maintaining tasks according to a schedule that you can do the modification. These tasks consist of changes such as updating software and security-related updates etc.

You cannot ever switch off the automatic maintenance. But some modifications can be done. Like you can change the timing of its working and also whether you want it to wake a computer that is in sleeping mode. By default, Windows does these tasks on every day at 2 AM and even wakes up your computer if required.
To set this tool, follow the given below instructions properly.

● Firstly, go to 'Control Panel'.
● Then, select 'System and Security'.
● After that, press on 'Security and Maintenance'.
● Alternative method-
● Firstly, press Start.
● Then, write Maintenance into the search box.
● After that, hit the 'Security And Maintenance' result.
● Note that in the Security and Maintenance Window, you need to increase the 'Maintenance' part, and then require to press the 'Change maintenance settings' link which would have been situated at the bottom.
● Here, in the Automatic Maintenance Window, if you want then modify the timings of tasks that are getting performed on a regular basis or can deactivate the function for Windows to wake your computer from sleep to complete tasks.
Remember that if Windows wakes your device to perform these tasks, it shall place your device again to sleep whenever the tasks are completed.

2. Clean Hard Drive Automatically

If you want a lot of storage space, on your hard drive and at the same time remove unnecessary data then read the given below correctly.
In Windows 10 you have a bonus because it uses 'Storage sense' that cleans temporary files like drafts and recycle bin automatically that are present in your system for a month or more than it. Mark that Storage Sense was inserted to Windows 10 in the Creator's Update, 2017. It saves a lot of your time. And makes your device work more efficiently.

To switch it on, follow the given below instructions-

● Firstly, go to Settings.
● Then, click on System.
● After that, select Storage.
● Next, switch on the Storage sense part.
● Press, Change how we free up space link

Source:-https://johnsonsjack.wordpress.com/2019/01/24/how-to-automate-commo...

Johnson Jack is an inventive person who has been doing intensive research in
particular topics and writing blogs and articles on Quicken, Quicken Support and
many other related topics. He is a very knowledgeable person with lots of experience.